Used Gas Fired Water Heater for sale (16,050)

Year of construction: 1995, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the German Water Resources Act (WHG) Dear Sir or Madam, we offer a 50,000-liter storage tank for the storage of water and wastewater as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standard and type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Bodpec Nkzgofx Acnedg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-release coupling according to DIN standard can also be offered. Of course, you can also participate in the design of your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer a cost-effective delivery service on request. You are welcome to visit our facilities at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us – one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free loading. Delivery can be offered at a reasonable cost for an additional charge. Delivery time = immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company in accordance with the German Water Resources Act (WHG), professionally empty, clean, dismantle and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: used, 100,000 litre – underground tank - double-walled - cleaned - 2 manholes - slight traces of dismantling present - internal coating possible upon request - Approved for service and firefighting water Loading and transport can be offered! Bdedpfxsxcgg Ts Acnog Only serious and credible enquiries with the following details will be answered: Name, e-mail address and telephone number.

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW Bodpfjfbgz Iox Acnsdg fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: used, machine/vehicle number: Bongard 10.16, functionality: fully functional, -10 outlets -This oven is a Bongard 10.16 deck oven, a true classic for artisanal bakeries -Type: deck oven with ring-shaped tubes Bdjdpfx Ajy Duzwjcnog -Energy: gas or oil -Baking surface: 10 m² -Useful height per deck: 200 mm -Number of decks: 5 -Doors: 600 mm, 2 doors per deck -Controls: panel on the right -Steam: high-performance steam generator heated by exhaust gases -Voltage: 400V

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm Bdjdpfx Ajcmr D Hscnjg internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. Bdjdoxwvruspfx Acneg The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Bsdpfx Asyr H Anecnodg Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Condition: used, - Trolley dimensions: 600 x 800 mm - Electromechanical control panel Bdedpfjyhqd Isx Acneg - Bongard 8.62 gas oven - Capacity: 144 to 180 baguettes - Supplied with gas burner Optimize Your Production with a Professionally Refurbished Oven, Ready for Use! - Trolley Dimensions: 600 x 800 mm – Compatible with standard bakery trolleys for easy handling. - Electromechanical Control Panel: Simple and intuitive for precise baking control. Production Capacity: - 180 baguettes of 250g on 19 baking levels – Maximize your bread production with a capacity suited for high-volume bakeries. - Supplied with Gas Burner: Versatile gas-powered oven, providing even and efficient baking. Why Choose the Bongard 8.62 Oven for Your Bakery? This professional oven is designed to meet the demands of modern bakeries, whether artisan or industrial. With high capacity and proven reliability, it ensures consistent baking results for superior quality bread. Dsdcusyhqd Io Ti Enjkh Don’t miss this opportunity to upgrade your bakery with a pre-owned Bongard oven. Contact us now for more information and to receive a tailored offer to meet your needs.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Bdjdpfxji Hckrs Acneg Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: ready for operation (used), functionality: fully functional, mileage: 48,000 km, power: 735.5 kW (1,000.00 HP), first registration: 04/2000, fuel type: diesel, empty load weight: 22,500 kg, axle configuration: 8x8, color: red, Year of construction: 2000, Equipment: additional headlights, all wheel drive, fog lights, FLF Airfield Firefighting Vehicle – 12,000 liters of WATER, 1,500 liters of FOAM. Can also be used as a forest fire vehicle. Bsdpfxotbu Ako Acnodg

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 Bdodpfx Acexm Rwqonjg THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, mileage: 29,000 km, power: 103 kW (140.04 HP), first registration: 10/2001, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2027, color: red, gearing type: mechanical, emission class: euro3, number of seats: 6, total length: 6,000 mm, total width: 2,300 mm, total height: 2,880 mm, loading space length: 2,900 mm, loading space width: 2,300 mm, loading space height: 1,740 mm, Year of construction: 2001, Equipment: ABS, First owner. German volunteer fire department, directly from active service. Valid TÜV (technical inspection) until 11/2027 (new at 28,955 km). Last service at a MAN service partner with proof of service at 27,992 km. Modern ZIEGLER Alpas aluminum superstructure from 2001. 750 L fire water tank. Quick-attack system. Fireco light mast, pneumatically operated with LED spotlights, mounted between the superstructure and the cab. Analog radio installed / digital radio prepared. Ball-head tow hitch prepared, connections for 12 and 24 V. Towing capacity 3500 kg braked. Wheelbase 3300 mm. Four-cylinder MAN truck diesel engine with 4580 ccm and 140 hp. Euro 3 emission standard. 5-speed manual transmission. Leaf spring suspension. Maximum speed 85 km/h. Overall vehicle dimensions: Length 6.00 m / Width 2.30 m / Height 2.88 m. Unladen weight: 4550 kg. Permissible total weight: 7490 kg. Tires 215/75R 17.5 (rear tires from 2015 and front tires from 2022). Crew cab / 6 seats in total. ABS. Radio. 100 liter diesel tank with tank lock. Vehicle equipped with special warning system and DIN mounting according to 14530-17 for TSF-W (standard fire engine), without loose equipment. Bodpfx Acszx Ifpjnsdg The MAN was driven to us without any problems in September 2026, covering a distance of over 600 kilometers on the highway. It runs very well. This fire engine is immediately ready for use, has typical signs of wear, and is in good condition. Ideal vehicle for the training of firefighters and also for the youth fire brigade, as it is a very compact fire engine with low loading heights. This offer is only valid for commercial enterprises and freelancers of all kinds, as well as for authorities and emergency services of all kinds. Sale to private end-users is unfortunately not possible. Subject to prior sale and errors. Purchase price according to §25a UStG (German VAT Act) differential taxation (gross = net, there is no separately stated VAT and it will not be added).

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, Nitrogen Gas Production Capacity 30 Nm3/H Bodsxrcauepfx Acnedg Nitrogen Outlet Pressure 200 BARG Nitrogen Gas Purity % 99.999 Hourly Energy Consumption 42 kWh Nitrogen Manifold Set 2 Pieces

Condition: new, useable dimensions (bogie hearth): depth: 4.000 mm width: 3.500 mm height: 1.500 mm Bdjdpfxsd Nf Sme Acnog max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW number of control groups: 3 PLC: Siemens S7 Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Condition: ready for operation (used), functionality: fully functional, power: 150 kW (203.94 HP), first registration: 12/2026, fuel: diesel, From our stock of used vehicles, we offer you: Fire engine HLF 10 on MB ATEGO 815 4x2 Chassis • Mercedes Benz MB 815D with manual transmission • 110 kW / 150 hp at 4249 cm³ • Power steering • Trailer coupling • First registration 12/2006 Bodpjzi Ubfefx Acnsdg • Mileage approx. 28,750 km • Three-point seat belts for all 9 seats Superstructure • Manufacturer: Rosenbauer • 2 PA in the cab + 2 in the superstructure • Design: HLF 10 • Pump capacity 10-1000 • Water tank 1,000 l • Stowage for standard equipment • FIAMM signaling system • 230 V charging system A complete inspection and maintenance will be carried out on the vehicle. This includes a thorough check of all technical components such as the engine, transmission, differential, and pumps, as well as the replacement of all filters and lubricants. The vehicles will receive a current TÜV (technical inspection) and SP (safety inspection) certificate. We will be happy to provide you with a specific offer and give you a detailed presentation of the vehicle. Note: All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. Images may show optional equipment. This does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus • Deployment system for 2 single-person reels Bdsdpfjzv Eqkox Acnsg Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device We will gladly provide you with a detailed offer and show you the vehicle in Berlin. All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, Year of construction: 2012, operating hours: 5,600 h, load capacity: 5,000 kg, lifting height: 6,000 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, LINDE H50T-01 FORKLIFT TRUCK GAS SYSTEM | TRIPLEX | GRAMMER CABIN | SINGLE OWNER SINGLE OWNER YEAR OF MANUFACTURE: 2012 LOAD CAPACITY: 5,000 kg UNLADEN WEIGHT: 7,040 kg ENGINE POWER: 55 kW OPERATING HOURS: 5,600 LIQUEFIED PETROLEUM GAS (GAS SYSTEM) TRIPLEX MAST HYDRAULIC CONNECTIONS AUTOMATIC TRANSMISSION GRAMMER DRIVER'S CABIN HEATER SIDE DOOR AVAILABLE (NEVER USED) LIGHTING GOOD TIRES IMMEDIATELY READY FOR OPERATION EXPORT SALES ONLY WITH DEPOSIT MINIMUM €500 – €2,000 EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS PLATES AND 17 – 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS EXCLUSIVELY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500 / €1,000 will be charged. Subject to changes, errors, and prior sale! Bodpfx Acoyqdldonsdg You can find more vehicles on our homepage: Sale takes place exclusively according to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our offer, errors may still occur. Some of these errors result from transmission faults across different platform providers. Therefore, all details are provided without guarantee and do not represent any legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Instead, it provides information to initiate a contract. All information provided is without guarantee and does not constitute guaranteed characteristics.

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Bdjdpfxszwb R Nj Acnog Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, ANIGAS fire-tube steam boiler equipped with an automatic RAY burner, EG Series, designed to operate on natural gas. TECHNICAL DATA Bdodszvf I Nspfx Acnjg Manufacturer: ANIGAS Boiler type: Fire-tube steam boiler Fuel: Natural gas Total volume: 25,000 litres Steam production capacity: 9,000 kg/h Maximum allowable pressure (PS): 25 bar Maximum operating temperature: 229 °C Manufacturing number: 77501-1 Burner: Automatic RAY burner Burner series: EG Rated power: 6,771 kW

Condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system Bjdpfxscmxzij Acnsdg - carousel with molds - charge box - measuring and control system

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Bsdpfx Asnab Rzocnedg Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, heated length: 4000 mm Bdodpfx Ajcdizfecnog conveyor belt width: 900 mm temperature: max. 950 ° C

Condition: used, mileage: 259,000 km, power: 190 kW (258.33 HP), first registration: 01/2007, fuel type: gasoline, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro5, number of seats: 3, total length: 7,200 mm, loading space length: 4,500 mm, loading space width: 1,780 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! We prefer to sell to commercial businesses. Internal ID number: [3198] ----Optional extras: * Nationwide delivery * Financing possible even without a down payment * Trailer hitch can be retrofitted on request * Spring offer: On request and for an additional charge of only €999, the trailer load can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Large 3.6-liter gasoline engine * CNG gas system (90-liter tank) * XXL Maxi version with extra-long overhang + high roof * Cruise control * Auxiliary heater * Automatic climate control * Navigation system * Rear view camera * Comfort driver's seat * Trailer hitch Special equipment: Airbag on the passenger side, outside temperature display, battery 100 Ah, additional battery (reinforced), windows for rear doors/tailgate with wiper/washer system, generator 180 A, rear door (opening angle 270 degrees), wooden floor in the cargo area, cargo area partition with window, parking assistance system (PTS), spare wheel in roadworthy condition, spare wheel holder under the end of the frame including jack, interior rearview mirror, mud flaps at the rear, mud flaps at the front, seats in the cab: comfort suspension seat, passenger side, seats in the cab: comfort suspension seat, driver side, stabilizer bar at the rear, reinforced stabilizer bar at the front, fuel gauge for auxiliary heater, separating relay with additional battery, step for the rear door, auxiliary heater (hot water) Additional equipment: 3rd brake light, airbag on the driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assist, headliner in the cab, lockable glove compartment, body/structure: high-roof box van standard, child lock, fuel tank: main tank 100 liters, cargo securing/lashing eyes, headlight range adjustment, engine 3.5 liters - 190 kW V6, wheelbase 4325 mm, low emissions according to emission standard Euro 4 Group III, sliding door loading/passenger compartment right, steel rims 6.5x16, service interval indicator Assyst, heat-insulating glazing, permissible total weight 3.50 t ----Would you like to lease or finance? We offer attractive offers – even without a down payment! Please feel free to contact us. Contact: Telephone: Bjdpfx Aceyqlpkjnsdg Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sales are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our commercial customers.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting Bedjxgua Aopfx Acnedg 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed Bedonab Sispfx Acnedg - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!