Used Gantry Type Milling Machine for sale (109,338)

Year of construction: 2001, condition: good (used), CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Bedpfx Aed Eranecyeww Machine with full enclosure. Machine card see more data. Machine in good condition.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Bjdpov Rw Uujfx Acyeww Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 1,065 mm, table length: 5,000 mm, mount diameter: 50 mm, total height: 39,900 mm, total width: 48,500 mm, total length: 100,000 mm, overall weight: 20,000 kg, power: 0.03 kW (0.04 HP), X-axis: 4300mm Y-axis: 1200mm Z-Axis: 1460mm Table Length: 5000mm Table Width: 1065mm Table load: 20000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: Bt 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 10000mm Bwsdperx Rkmofx Acyow Width: 4850mm Height: 3990mm Weight: 20000kg

Condition: reconditioned (used), Year of construction: 2009, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm control iTNC 530 HEIDENHAIN table-size 3.230 x 1.050 mm Bsdpfevlzznex Acysww table load 8,0 t spindle taper ISO 50 tool change unit 24 Pos. spindle turning speed range 30 - 3.500 U/min drive capacity - spindle motor 25 kW feed stepless 1 - 5.000 mm/min rapid traverse 10,0 m/min chip conveyor Spiralförderer voltage 380 V total power requirement 35 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 7,40 x 3,65 x 3,60 m hydraulic power unit 1,40 x 0,50 x 0,60 m 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

Year of construction: 1997, condition: used, machine/vehicle number: B-388, Used FIL FA 160 HEIDENHAIN TNC-360 Bed type milling machine Bsdpfx Acsgcuzrjysww

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Bwodsunhy Sepfx Acysw Documentation for machine

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Bedpjwdm U Nofx Acysww Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Bjdpfxsun Nnqj Acyjww Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication - Ball screws (IT5) in all axes - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Bwsdorw Arzepfx Acyjw Equipment Electronic Handwheel Chip conveyor 4th axis ready

Condition: used, Year of construction: 1980, x-travel:1600 mm y-travel:800 mm z-travel:630 mm spindle taper:SK 50 feed speeds:10-6000 mm/min rapid traverse:6 m/min turning speed range - stepless:20-2000 U/min max. table load:5000 kg dimensions of switch cabinet:1800 x 530 x 2000 mm total power requirement:18 kW weight of the machine ca.:11 t dimensions of the machine ca.:4,6 x 2,9 x 2,62 m Bsdpfxscxxrnj Acysww with PHILIPS NC 6664 3-axis control with program memory, hydraulic tool clamping, coolant system, chip-conveyor, horizontal and vertical spindles (SK 50), separate electrical cabinet, NC-round table, emergency cut-off

Condition: good (used), ANAYAK VH 2200 CNC Bed Mill (Year 2000) Heidenhain 426 Travel X: 2000 mm Travel Y: 920 mm Travel Z: 900 mm Bwodsu T Il Rjpfx Acyow Table: 2200 x 700 mm Workpiece weight: 3000 kg Spindle power: 22.5/34 KW Spindle speed: 3000 rpm Feed: 5 m/min Rapid traverse: 15 m/min Weight: 12 tons

Condition: reconditioned (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, The scope of delivery includes 15 ISO 50 tools for various applications, 1 rotary table, and 2 vices, as shown in the pictures. TECHNICAL DETAILS Travel X-axis: 2,995 mm Travel Y-axis: 800 mm Travel Z-axis: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min MACHINE DETAILS Dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible Bwodpfx Aowkqa Ascyjw

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 1,800 rpm, controller model: Fagor 8055, TECHNICAL DETAILS Table size: 1,700 x 510 mm Max. table load: 3,000 kg Travel paths X-axis travel: 1,320 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Spindle Spindle speed range: max. 1,800 rpm Tool holder: ISO-50 Control system CNC control: Fagor 8055 Electronic handwheel: Fagor MACHINE DETAILS Bsdpfxewfghrj Acyeww Machine weight: 8,500 kg

Condition: excellent (used), AL-Line 0607 Gantry Milling Machine with CE Marking Precision Collet HF Converter HFU-1500-SSE for Control Cabinet Installation Travel: 650 x 750 x 220 mm Mounting Area: approx. 1000 x 750 mm Clearance Height under Z: approx. 250 mm Guides: 20-series recirculating ball linear guides Ball Screws: 2 external spindles in X X: 16 x 10 mm Y: 16 x 10 mm Z: 16 x 5 mm Weight approx.: 120 kg Year of Manufacture: 2018 Equipment: Reference sensors on all axes Machine base AL0607 for enclosure, fully assembled Aluminum profiles including 19 mm gray chipboard * Compact base frame made of aluminum profile * 4 x 3 Nm 2-phase hybrid servo motors / ES-M22430 AL-Line electric brake module for Z-axis for closed-loop system (prevents the Z-axis from dropping when the control is off) * Leadshine 80V/8A 3-axis closed-loop stepper motor controller in control cabinet * Leadshine 80V/8A closed-loop axis extension for control cabinet * Eding-CNC iCNC600 industrial controller for Eding CNC * Z-Finder inductive PNP tool length sensor with 14 mm probe head * HF spindle set 4545/1 Set consists of spindle, converter, cable, and spindle holder Manual change Speed: 5,000 – max. 60,000 rpm Power: Max. 0.45 kW Housing diameter: 45 mm Housing: Stainless steel Bearings: 2 bearings Hybrid ceramic ball bearings Lifetime grease lubrication Cooling: Labyrinth air cooling via air purge connection Tool change: Manual with union nut Clamping system: ER11 up to max. 8.0 mm Motor protection: PTC sensor Frequency: up to 1,000 Hz Air purge connection * Enclosure, table-top design, fully assembled 2 hinged doors at the front, 1 door at the side * Top cover * Special safety technology version: Reliable position detection for door release: consisting of safety relay and sensors DN3PS2 standstill monitor without sensor DINA, for 1/3-phase motors Reliable monitoring of spindle standstill for door release * AZM161SK safety switch, closed-circuit principle, 4NC, 2NO, 24V, fail-safe locking Bwodpfxov Skpzj Acyow

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 12,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, spindle speed (max.): 4,000 rpm, input voltage: 380 V, input frequency: 50 Hz, Bed type millimg machine FIL type FBM 600,axis traverse ; X 6000 mmY1200mmZ2000mm. Rapid traverse 12000 mm/min. Automatic head index 2*, rpm4000 two range, spindle uso 50. Tool magazine 40 positions Bwsdpfx Aewb Exzocyew Cnc Selca type S3045

Condition: used, Year of construction: 2013, functionality: unexamined, power: 0.75 kW (1.02 HP), Urban 4 m bed milling machine SK40 for sale. Slightly used, has only been used a little! The machine was set up and commissioned by Urban in February 2023 and has very few operating hours. The machine has a pick-up station incl. angle head drive as an accessory. Bwodpfju Aqmlox Acysw Bids ex location Dossenheim.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller model: LNC-Control, workpiece length (max.): 150 mm, total height: 2,100 mm, total length: 3,100 mm, total width: 1,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, tool weight: 600 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMA-Machinery designs and assembles Dutch CNC routers and CNC portal milling machines. Flexible operation is ensured by the CadCm software from "PEGASUS"—draw easily using macros or freeform lines. No G-codes are required; you can import your own designs via DXF, DWG, EPS, PLT, and more. Continue using AutoDesk Fusion, AutoCAD, SketchUp, or other CAD programs without limitation. Available working areas and prices: • 1300x2600mm, Z-axis 200mm: €31,800 • 1600x3200mm, Z-axis 200mm: €37,500 • 2100x3200mm, Z-axis 200mm: €41,600 CNC Milling Machine BudgeCraft: Compact High-Precision Machining Center (0.01 mm) Dutch-assembled CNC milling machine compliant with EG2023 EUROPE CE-Standard. Spindle Motor (ATC Spindle): - Tool holder type: ISO-BIESSE - Inverter-controlled spindle motor. 3-axis controlled, 3,000–24,000 rpm. Double linear high-precision guides guarantee maximum accuracy. The 2nd Z-axis is positioned by a ball screw, enabling 3D and relief machining. - Tools are clamped automatically. Spindle sensors monitor correct clamping and release of tool holders. During tool changes, both cones and spindle are pneumatically cleaned. Drive System: - Brushless servo motors allow for high acceleration and extremely high speeds. These motors reduce maintenance due to digital control and feedback, providing greater precision and improved machining finish. - Linear tool magazine located under the gantry, with 8–14 spacious positions. Automatic tool changer. Reference Stops: - Reduced cutting losses and efficient, rapid positioning using stop cylinders at the front of the vacuum worktable. Standard rear-mounted solid stop cylinders for large sheet dimensions are directly attached to the table. Automatic Tool Length Measurement System: Bwjdpfx Ajxl Apijcyew Milling Spindle Protective Cover: - A key safety device that protects the motor from foreign objects and debris, helping to extend motor life and improve workplace safety. CNC/NORM EG2023-EUROPEO Safety: - Optical electronic safety ensures immediate stoppage of the machine when a person enters the secured area, protecting individuals from machine-related hazards. Technical specifications: - X-axis working range: 2,600–3,200mm - Y-axis working range: 1,300–1,600–2,100mm - Table size options: 1326 / 1632 / 2132 - Z-axis stroke: mm - Structure: Portal / Gantry construction: Yes - Spindle motor: 9kW air-cooled - ATC spindle: Yes - Speed: 3,000–24,000 rpm - X-axis movement: 50m/min - Y-axis movement: 50m/min - Z-axis movement: 15m/min - Tool holder: ISO30–ER32/ER40 - Software: Pegasus PWoodMilling - Vacuum pump: Side channel blower turbine vacuum pump 7.5kW, max flow rate: 340m³/h

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Bwedsunia Hjpfx Acysw

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Stock laminating machine, type 145678/1650P age 2001 Equipped with: • Automatic pallet feeder for lining • Magazie for cardboard • Automatic gluing • Glue pump with closed circulation • Pressing unit • Counter for collating • Turning device • Jogger on delivery • Pallet delivery • Max sheet size: 1640x1640 mm • Min. sheet size: 490x490 mm • Production speed for size B1 approx 4500 sheets/h Bwsdpfxjxq Hn To Acyow • In production

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Bwjdpfx Aewtnxnscyjw Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Bodpfx Acexftqdsyeww Prototrak SMX CNC Control,

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Bwsdpfjv Sfk Hox Acyow Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 540 mm, table load: 1,500 kg, controller model: Heidenhain TNC 355, TECHNICAL DETAILS Travel X: 1,390 mm Travel Y: 710 mm Travel Z: 540 mm Table width: 560 mm Table length: 1,800 mm Table load capacity: 1,500 kg Tool holder: SK50 Speed range: 45 - 2,240 rpm Vertical speed: up to 2,800 rpm Feed range: 3 - 2,000 mm/min MACHINE DETAILS Control: Heidenhain TNC 355 Main drive: 18.5 kW Transport dimensions & weight Transport dimensions (L x W x H): 2.7 x 3.0 x 2.9 m Transport width with X-axis drive removed: 2.45 m Bjdjxn S Sfopfx Acyeww Machine weight: approx. 5.5 t EQUIPMENT Rapid traverse on all 3 axes Swivelling milling head +/- 45°, including quill stroke 90 mm Swivelling bracket for vertical milling head Swivelling counterholder for horizontal milling arbors Electromechanical tool clamping Manuals

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, overall weight: 13,000 kg, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Bwodpfx Aexrb Abjcyew X-axis travel: 650 mm Y-axis travel: 1,100 mm Z-axis travel: 500 mm C-axis rotation: 360° Tool magazine: 32 pcs. MACHINE DETAILS Number of axes: 3 Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Weight: 13,000 kg EQUIPMENT Chip conveyor Probe Documentation CE marking

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Bedexr U Drjpfx Acysww Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer