Used Gang Saw for sale (7,046)

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Blade stroke: 800 mm. Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Cycles per minute: 85 Voltage: 400v/50hz Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. Kdedpjv D Napofx Ag Ajw With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Kodpfew Eu Akex Ag Ajdw 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: good (used), Year of construction: 1971, Esterer frame saw with many spare parts and at least 40 new and used saw blades. Kodpfx Agencfiys Aedw The gang saw is in a good, ready to use condition with minimal bearing play. After agreement the saw blade grinders can be sold with the saw.

Condition: excellent (used), Loroch Hydromat gang saw sharpener Ksdsnucmpspfx Ag Aodw Hydraulics Full automatic Automatic lowering of the grinding wheel after a full cycle Last cycle so called squeezing Sharpening unit tilting at an angle of 0-30 Double-sided slat with 25 and 20mm graduation

Year of construction: 2015, condition: like new (used), machine/vehicle number: 4834, Catalogue price of the new machine at moment of purchase starts from 240.000€ net for basic set up. Machine production year 2014, installed 2015/2016. Top condition, gives clean cutting C120, therefore there is no need ot hone sandstone slabs. Kjdpjmv Ercefx Ag Aodw

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Kdjdowd N Daspfx Ag Aew Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: used, Year of construction: 1987, No. 3186 Kdedpfovcqanox Ag Asw Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Magnetic gauges with 3 tubes, 2 magnets, and 1 hole for inserts available for the following wood dimensions: 18/20/24/25.5/38/40/45/48/50/58/60 and 75 mm, as well as inserts with 12 mm Ø fastening bolts in various widths from 2 to 12 mm. Kdodpjw Suwtsfx Ag Aow

Condition: excellent (used), Year of construction: 2022, Hydraulic saw tensioner for gang saws Die Sägenmacher GmbH / Thöress Year of manufacture: 2022 Total length: 710 mm Total width: 215 mm Total height: 85 mm With plenty of spare parts Very good condition - available immediately Kdodpfx Agowbu S Rs Ajw Location: Austria, near Ried im Innkreis

Condition: good (used), Frame width 560 mm, stroke 500 mm, hydraulic roller lifting unit, feed with overhang regulation Kdedpswln Rbjfx Ag Ajw

Year of construction: 1976, condition: excellent (used), Full frame saw / frame saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 75HP, 380V, 50Hz max. passage 710 mm stroke: 500 mm Kodpfx Agepyglis Aodw with splitting wedge Marathon 2 very good condition - available immediately Location: Austria, near Feldkirch

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Kdjdpfx Ajwhv Rneg Aew

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Kedjngz N Iepfx Ag Ajdw 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: excellent (used), Spare parts for LINCK FSF 56 gang saw: Kjdpswziwbsfx Ag Ajdw 8 saw frame guides, newly milled, 8 guide shoes prism new, flat newly milled, 1 saw frame, 2 bottom rollers and 2 top rollers with replaceable half shells, gear racks, guide bearings, chain wheels, 1 set of chain tensioners, 1 lifting hydraulics with 2 hydraulic motors and gearbox, 2 sets of white metal main bearings, 1 idle wheel with bushing

Condition: excellent (used), passing width 1.000mm, stroke 800 mm, saw motor 22 kW or 30 kW, high adjustment by gear motor with brake, automatic lubrication pump, clamping carriage 6 m with 7 m rack, 6 mechanical clamping stations Kodpfxetzlrfs Ag Ajdw

Condition: excellent (used), 2 complete sets of white metal main bearings, each set consisting of 4 bearing shells, bearing inner Ø = main shaft Ø 140 mm, bearing outer Ø 200 mm or 220 mm, width of each shell 100 mm Kdsdpfx Agswv Rphe Asw

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Kdsdpomqkr Dofx Ag Aow

Condition: new, pinion heads for gang saw complete with ball joint pins and red brass bushes, spare part number 23 a + b or 235254-01 Kodpfx Agstq Eq Rj Aedw

Year of construction: 2005, condition: good (used), Engine power kW: 1.1 Weight kg: 300 Stepless adjustment of the rake angle of the grinding wheel Kdodpfx Agshqcmuo Aow Integrated dust / spark extraction

Condition: excellent (used), For sale is a Costa puma series cutter in excellent condition. It can be put to work immediately. It can be tested on site. I will send a video upon request. Kodpfx Asxw Rhdjg Ajdw

Condition: used, screw diameter: 35 mm, For sale: SJ35 Single Screw Plastic Extruder manufactured by Zhang Jia Gang Friend Machinery Co., Ltd. A compact and reliable extrusion unit suitable for small- to medium-scale production—ideal for laboratory testing or extrusion of plastic tubes, profiles, or filaments. The machine is fully functional, well maintained, and available for immediate inspection. Technical Specifications Model: SJ35 Manufacturer: Zhang Jia Gang Friend Machinery Co., Ltd. (China) Screw diameter: Ø35 mm L/D ratio: 35:28 Main motor power: 7.5 kW Center height: 1000 mm Gearbox: ZLYJ112 (ratio 16:1, 2017) Heating zones: multiple, each independently controlled Drive: ABB inverter control Hopper dryer and feeder included Electrical supply: 400 V / 3 phase / 50 Hz Condition: fully operational and tested Condition Very good technical and visual condition Equipped with digital temperature controllers and main motor speed control Ksdsxuczqopfx Ag Aedw Comes with complete electrical cabinet with ABB inverter and wiring Regularly maintained, all components present Available for inspection and testing in Ivanka pri Nitre, Slovakia Price €5,000 (negotiable) Ex-works Ivanka pri Nitre, Slovakia Ideal for: - Plastic extrusion of small profiles, tubes, and filaments - Laboratory testing and material development - Educational or pilot-scale production facilities

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm Kdedpfx Agsfv Hpho Ajw blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available Kdedpfx Ajb A N Aksg Asw -Weight: 2 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm Kdjdpfx Agewxmhle Aew In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Kodpotqt T Iofx Ag Ajdw - electrical cabinet.