Gang saw roller table with 4 strippers

Esterer

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Fgjdpfjyw Sv Esx Ac Aed

Condition: ready for operation (used), Four-sided planer / construction timber planer Maximum width: approx. 55 cm Maximum height: approx. 14 cm Fgodpfx Ajw Dn Uqoc Aod Immediately available Location: Austria, near Grieskirchen

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Fgedpfsmqkr Dex Ac Ajd

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Fsdpfozht Hwsx Ac Ajgd Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc.

Condition: used, Frame Saw Esterer LSH Fgedpfx Acow Dn S Aj Asd Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Fodpfxozgr Iqo Ac Asgd Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) Fgsdpfjzc I Srex Ac Aed (Prices may change due to strong fluctuations)

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Braun resaw Type CH6B-70, year 1972 Swing frame without width adjustment with splitting wedge Saw tensioner - hydraulic side pressure, year 1989 Round timber transverse conveyor with 4 strands, approx. 7 m long, year 1980 Round timber singulator with 5 strands, approx. 1.40 m long, year 1980 Fgjdpfx Asv I D Ezsc Asd Mayerhofer carriage Type VH with auxiliary carriage, year 2002 Powered resaw roller conveyor, 4 m long, 1.60 m wide, year 1980 Powered resaw roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Transverse conveyor with 5 strands, approx. 6 m long, for side timber, year 1980 Sharpening equipment consisting of: Meinert resaw saw set machine PH4D, year 1967 Vollmer automatic resaw saw set machine AT

Condition: used, Esterer DKV -160mm cutting height -with 2 mobile saws and 1 fixed saw Fjdpewtclijfx Ac Asgd -lath bush -splinter separator

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled New bearings for pressure rollers and motor Fgedpfx Ajqvz U Eec Ajd new tips opening width: 430 mm

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fgjdpjyhduyjfx Ac Aod Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed Fsdpsw I Sg Djfx Ac Ajgd • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Fjdpfx Ajw Eu Akjc Ajgd 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 10 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Fjdpfx Ajmccr Esc Aogd • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 10 m Linear Unit: ProfiStop Omicron Material Length: 9230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, maximum load weight: 27,920 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/1993, next inspection (TÜV): 02/2027, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, * Fixed tank with 6 compartments, total capacity 40,320 liters * 7,360 l / 7,430 l / 6,750 l / 5,400 l / 5,880 l / 7,500 l (compartments 1-6) * FMC MultiFlow tanker control system * FMC GMV Z1000 tanker hydraulics * Epson printing unit * Hose reel at rear right ----* Knorr braking system with ABS * BPW axles with drum brakes * 1st axle liftable * Central lubrication system * ADR certificate as per 9.1.1.2: FL & AT * Tank coding according to 45.3.3.1 ADR: LGBF ----* Tire size: 385/65R22.5 * Technical gross weight: 34,000 kg Fgedpfx Aceyx R Hrs Aod * Unladen weight: 6,080 kg * Total length: 11,350 mm * Tank periodic inspection due: 02/2026 * Tank hydraulic pressure test due: 02/2029 * Next safety inspection due: 08/2026 ----Vehicle number: 11955----Subject to errors and prior sale----Advertising and various lettering digitally removed. -----We are happy to assist you with all the administrative procedures involved in purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicleTÜV/Safety Inspection approvalComplete export handlingBrokerage of financingApplication for export license platesTransfer of vehiclesRegistration of vehiclesRecovery and vehicle transport----Your VTS Team