Used Formwork Cleaning for sale (6,351)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50,000 m³/h, pressure: 6 bar, total width: 9,000 mm, total length: 2,400 mm, total height: 8,500 mm, compressed air connection: 6 bar, Equipment: documentation/manual, Self-cleaning bag filter for dusty air Structure made of press-bent sheet metal, bolted with sealing gasket Design air flow rate: 55,000 m³/h Dimensions: approx. 9000 x 2400 x h 8500 mm No. 01 settling zone Total filter surface area: 512 m² Filter fabric: antistatic polyester, 500 g/m² Filter fabric cleaning: reverse air jet, adjustable via control panel/sequencer Dodjyhgyropfx Ac Nekh Filtered dust discharge system: motorized screw conveyor – motorized rotary valve for continuous discharge Safety ladder Top guardrail Machine control panel with the option to install an inverter

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: EF-0047/10, type of input current: three-phase, filter area: 113 m², volume flow: 11,840 m³/h, total width: 2,740 mm, total length: 6,100 mm, total height: 6,700 mm, Equipment: documentation/manual, Complete electrostatic filter system for dedusting flue gases from wood-fired plants with electronic control. Low maintenance. Minimal wear. Dksdpfx Ajyharzec Nsh

Condition: good (used), basket dimensions 0 control 0 total power requirement 0 kW Dksdpfx Aeyfh Rtoc Neh weight of the machine ca. 0 t ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power* (W) 800 Heating power (W) 800 Usable volume (liters) 8.6 Weight (kg) 14.8 Tank material: Stainless steel Housing material: Stainless steel 1.4301 External dimensions (W / D / H) (mm) 390 x 330 x 410 mm Usable dimensions W / D / H (mm) 300 / 240 / 140 With basket

Year of construction: 2008, operating hours: 60,542 h, condition: refurbished (used), Used cleaning machine type RCTS 048-032-020-03 Currently being overhauled by our technicians. Technical data: ROLL cleaning system: Drum cleaning automatic (K4914) Cleaning medium: halogen-free hydrocarbon or modified alcohol The use of high-quality solvent is recommended, e.g., (DOWCLENE TM 1601 or) DOWCLENE 1621 With CE mark in standard roll version according to drawing 5I04914X2-3---- The system complies with 31st BlmSchV (as of 21.08.2011), the Swiss Clean Air Ordinance (as of 01.03.1998), the Austrian VAV regulation (as of 26.07.2022), and the EU VOC Directive 199/13 The RCTS system is designed as a single-chamber flood cleaning machine. The system operates at full vacuum at approximately 100 mbar absolute pressure, eliminating the need for full explosion protection. Basket size / batch size: Schäfer 2 480 x 320 x 200 mm Maximum batch weight: 40 kg Year of manufacture: 2008 Operating hours: 60,542 Dkjdpoyg Eanefx Ac Njh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. Dksdpfxsvvuzco Ac Neh The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Djdetwmxyjpfx Ac Nokh Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Year of construction: 2004, condition: good (used), Tassold sheet cleaning machine - used Dkjdpfx Aeygllwec Neh - year of manufacture: 2004 - capacity: 1,000 pcs/h - with oiling system - technically operational - working width: 800 mm - manual control - collection from warehouse - price: €7,500 EXW

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Dodpfonl Ekrox Ac Nekh Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Year of construction: 2017, operating hours: 2,103 h, condition: good (used), functionality: fully functional, Welding and Corenr Cleaning Line - BD2030 - Four Head Welding Machine - CD3040 - 4 Axis CNC Corner Cleaning Machine - CE3000 - Feeding and turning robot - GB2010 - CMoving and cooling station • Welding of PVC profiles four corner at 90° degree and cleaning welded corners serially. • High performance cleaning with 4 Axis CNC machine which has patented special design 11 tools. • Automatic zero or normal welding chip thickness adjustment Patented. Dsdpfxeyf N U Te Ac Nskh • Automatic profile recognition and tolerance system to maintain standard production. • Sliding door system on cleaning unit which fastens the passing between automatic and manual usage. • Robot system to convey the corners to cleaning unit without time loss. • Conveyor system to convey the frames between units fastly and smoothly. Brush system prevents impair of surface quality • Practical mould replacement system. • Automatic Lubrication System. • Automatic transmission of profile recognition information from welding machine.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a fully automatic hydrocarbon cleaning system Amsonic EGAclean 4100 in used, extremely well-maintained condition. The system is designed for reliable and reproducible parts cleaning (including ultrasonic, filtration, vapor phase, and vacuum drying) and is ideal for precision and series component cleaning. 1) Identification / Nameplate Manufacturer: Amsonic AG (Precision Cleaning) System type / model: EGAclean 4100 Equipment No.: 980 000 5161 Year of manufacture: 2007 CE marking: available 2) Process / Technology (EGAclean – Hydrocarbon) Medium / Solvent class: A3 (hydrocarbon) Solvent: ZESTRON VD Typical process steps: • Immersion cleaning in hot solvent (above flash point) with ultrasonic and microfiltration • Vapor phase • Vacuum drying Practical advantage: consistent cleaning quality due to continuous distillation, highly compact design. 3) Technical Core Data (from nameplate) Electrical connection: 400 V / 3/N + PE / 50 Hz Power consumption: 32 kW Current circulation: 47 A Minimum fuse protection: 63 A Heating power: 19.5 kW (28 A) Max. bath temperature: 85 °C Max. cleaning chamber temperature: 85 °C Max. compressed air: 6…10 bar Ultrasonic frequency: 20 kHz Dsdoycl Tmspfx Ac Nekh Ultrasonic power: 1 × 1.0 kW Destillation pressure: 60…100 mbar (abs) Boiler pressure: 5 bar Boiler temperature: 150 °C Max. filling: approx. 426 l Max. batch / basket weight: 50 kg Flash point: min. 56 °C 4) Key Performance / Operating Data (from documentation) Productivity: approx. 200–300 kg/h Basket dimensions: 520 × 320 × 200 mm Cleaning costs: 0.041 (unit according to template: “…/kg”) Annual consumption: approx. 200 liters isoparaffin Distillation residues are incinerated in cement plants Air emissions: 1.7 kg VOC per year Annual energy consumption: approx. 17,000 kWh 5) Operating Hours / Maintenance / Condition Operating hours (readout): approx. 86,037 h (see photo, display with decimal point) Condition: used, extremely well-maintained Next maintenance: 2026

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, mast type: simplex, Sweeper suction machine Mast type: Standard Dsdpfx Acsukrcpo Nekh Technical condition: good Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear tire: 1 x bandage tire; Power steering; Front windshield; 2 x work lights / StVZO-like; Overall height: 2300 mm

Condition: used, Year of construction: 2014, operating hours: 8,498 h, functionality: fully functional, mast type: simplex, Sweeper-scrubber Mast type: Standard Technical condition: normal Transmission: Hydrostatic; Tires: 2 x drive wheels bandage power steering Overall height: 2300 mm Dedpfxjukrcij Ac Njkh

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Dksdpfxjidabkj Ac Noh Fresh/waste water tank volume: 50/ 50 L

Condition: used, Used, in working condition. Available for delivery. Dkjdpfeyfncpox Ac Njh

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For consistently clean components in continuous operation Continuous flow cleaning system made of stainless steel with oil separator for uninterrupted material throughput. The parts to be cleaned pass continuously—or, if needed, in cycles—through successive treatment zones. Cleaning is carried out by passing the parts by fixed nozzle systems. Designed for components with dimensions approx. 400 x 100 x 200 mm Wire link conveyor transports the components lying flat or standing upright through the cleaning system • Surrounding nozzle frame – the offset nozzle arrangement enables all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle and frame adjustment to suit component • Customizable useful dimensions, load capacity, and pump output Process steps occur in successive treatment zones: • Spray cleaning – series connection of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank capacities: Washing tank: 800 liters Dsdpfjxcun Ejx Ac Nokh Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pumps: 3.0 kW Rinsing tank pumps: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine includes stainless steel drip trays for leakage protection—these are included in the price and will be delivered with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Cart for the management of all cleaning operations of the glue pots and the maintenance of polyurethane glue in complete ergonomics and safety. Dksdpfx Acoyfhnxo Nsh Easy cart can be placed within the production area in a completely independent way thanks to its wheels and the small overall dimensions of less than one square meter. All connections are equipped with quick couplings to ensure easy removal and installation. Easy cart allows the simultaneous management of up to 3 glue pots: 2 glue pots in the maintenance position inside the special tank and 1 in external position with motorization for cleaning, maintenance, and glue change. All glue pots can be thermoregulated for a quick process changeover.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, IFP - KP50HYBRID Metal Degreasing and Cleaning System Dsdpfx Acsx Ivtpj Nokh HYBRID Technology: Solvent-based and aqueous component cleaning in a single system. Demonstration unit, year of manufacture: 2024 Condition: As new Technical specifications: • Usable solvents/cleaners: modified alcohol (Alll) + water with detergent • Basket dimensions (L x W x H): 480 x 320 x 200 mm • Maximum basket weight: 50 kg • Throughput: 3 - 8 batches/hour • Connected load: 30 kW • Energy consumption: 15 kWh • Compressed air: 6 bar • System dimensions (L x W x H): 3000 x 2000 x 3000 mm • System weight: 4,100 kg • System cooling: Air/water-cooled (customer-side chilled water supply required) System features: • Fully enclosed system design • Service doors • Rotating and swiveling device • Front loading with safety glass door • 2 buffer tanks for solvent • 2 buffer tanks for water • Ultrasonic cleaning equipment • Process filtration • Fine filtration • Intensive vacuum drying • 12'' touch panel • Sliding table with two basket stations • Preservation unit • Online access for remote maintenance

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: Type:8657, empty load weight: 2,200 kg, power: 5.5 kW (7.48 HP), total length: 7,500 mm, operating pressure: 6 bar, pressure: 6 bar, For sale is a used Veit Tunnelfinisher 8657 for garment finishing, equipped with 2 Veit electric steam generators, each with 60 kW electric capacity. Year of manufacture: 2015. Infeed and outfeed conveyors, each 8 meters long, are included. The system was dismantled by us in September and is available for inspection at our warehouse. You can view its operation on YouTube: Veit Tunnelfinisher 8657. Dkedoxrp Ewjpfx Ac Neh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, empty load weight: 2,200 kg, The Veit Tunnelfinisher 8657 is the ideal solution for garment finishing. The maximum throughput is approximately 2,200 pieces. We have dismantled the system, and it is available for inspection at our warehouse. Garments are transported through the finisher by a chain conveyor with hook system. Each 8 meters of infeed and outfeed conveyors are included. Additionally, electric steam generators and an air compressor can be offered. Dedpfx Asyffpaec Nokh

Year of construction: 2025, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, The cleaning system utilizes the latest and most advanced technology for precise surface cleaning available on the market. The high energy efficiency and instant heat generation of the laser produce an explosive effect on the material’s surface, effectively vaporizing and removing contaminants and unwanted residues—contact-free, environmentally friendly, and efficient. Dkjdpfxsyffdke Ac Nsh Compared to traditional industrial cleaning methods, laser cleaning offers numerous advantages: it is eco-friendly, highly efficient, space-saving, flexible, and easy to operate—making it increasingly preferred by companies.

Condition: used, Year of construction: 2011, operating hours: 762 h, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeper-scrubber machine Condition: Refurbished without warranty Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Dkedpfx Acoxl H Uvs Nsh Battery type: Gel Battery condition: 60 - 80% Description: The machine has been workshop tested, passed new UVV inspection, all sweeping rollers and brushes are new, with warning beacon.

Year of construction: 2026, condition: new, functionality: fully functional, ROBO CLEAN Robot for cleaning and polishing fused silica rollers for glass tempering furnaces * Fully automatic 2-hour cleaning cycle * Use of the same robot on multiple furnaces of different widths and types * Improved tempered glass quality Dkedpsyanp Esfx Ac Neh * No risk of roller wear * No need to use water

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 2879, We offer this used Colussi Ermes SRL L001-027 steam-powered trolley cleaning machine (smoking/cooking) made of stainless steel, year of manufacture 2016. Dkedpeydn Shsfx Ac Njh If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: good (used), functionality: fully functional, Sheet Cleaning Machine Jeros 5015/828 for 2-edge trays short side raised stainless steel design with oiling system DGUV V3 tested exclusively by us connection 400V, 16A CEE plug Dksdjyaklcopfx Ac Nsh Used machine Options: sheet trolley maintenance contract service package delivery service training & commissioning spare parts box Visit us!

Condition: used, Year of construction: 2001, functionality: fully functional, P3 foam cleaning for rinsers and fillers Dsdpfx Ajww Hnvoc Njkh Pumps and valves Attached stainless steel cabinet with Siemens S7 control system