Used Formwork Cleaning for sale (6,346)

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen -injection pressure: 3 bar -basket load: 200kg Dsdpfx Ajf A Nq Usc Neun -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. Dusdpfx Asf A D Nmoc Non The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: new, Year of construction: 2023, Automate your cleaning process with Superior series machines: lifting device with support grid for effortless handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 8000 L Dodpfjf E Nt Dox Ac Njun TECHNICAL CHARACTERISTICS Exterior dimensions of the machine 2,140 x 1,540 x 1,720mm Interior dimensions of the vat 1,300 x 794 x 670mm Useful measurements of the parts grid 1,270 x 685 x 470mm Maximum load 400kg Height of the worktop 980mm Vat capacity L 692 Power of the ultrasonic generator 4,800W Ultrasonic work frequency kHz 28 Heating element kW 12

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Very little used Full vacuum technology 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm Dusdjvyp D Tepfx Ac Nsn The system has been technically tested by us for functionality. We can quickly provide training, commissioning, service, and spare parts. We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: fully functional, machine/vehicle number: HERO20027196, Surface cleaning laser for graffiti removal and facade cleaning; removes paint and rust from metals. The cleaning head of the laser can be connected to an extraction system. Dedpfx Asx Taifjc Noun

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Djdpfx Aebuvbrsc Neun Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Duodpfxscdy Ndj Ac Non Exhibition piece At an absolute special price Location: From stock Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Dsdpfx Aocnw U Doc Nsun Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Dodpfx Acecqy I Ss Njun Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Dedpfx Aedqzhhjc Noun Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dedscdy I Tspfx Ac Neun Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Dusdpfxshkztwj Ac Non Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h Dujdpfx Aohkzt Nsc Nsn - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Dsdpfshkzu Ajx Ac Neun Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - Dujdeh D If Hjpfx Ac Njn subject to prior sale Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Dujdscdy I Ropfx Ac Non Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Dujdpfecnw T Iex Ac Nen Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Dodshkzttspfx Ac Njun Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Dujdpfx Acecdr E As Nen Subject to prior sale

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Dujdpfsv Uzr Eox Ac Nsn

Condition: new, Year of construction: 2026, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Djdpfec Riycox Ac Noun Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray without optional lifter function

Year of construction: 2000, condition: used, functionality: fully functional, machine/vehicle number: 200158, We offer this used MTM RWST 650 cleaning system, year of manufacture 2000. Manufacturer: Meißner Technik Müllenbach GmbH Machine type: RWST 650 Machine no.: 200158 Circuit diagram no.: 200158 Dedpfx Aex Sx S Ajc Noun Piping diagram: HR.9000:00 Year of manufacture: 2000 Operating voltage: 3/PEN 400 V Frequency: 50 Hz Control voltage: 24 VDC Total connected load: 100 kVA Rated machine current: 153 A Main fuse in supply line: Slow-blow rated current: 200 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2015, condition: excellent (used), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Used Location Cologne Dusdoiv S Agopfx Ac Nen regularly serviced Laboratory resolution various microscopes and other equipment gladly

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Dedexcnxdopfx Ac Nsun Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel Doderbf R Topfx Ac Nsun - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system