Used Folding Inserting Machine for sale (86,212)

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) Gtedjx Hyhbspfx Agbot • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: used, functionality: fully functional, Year of construction: 2003, FLEXIbend RAS 73.30 - General technical data in mm: Bending length: 3200 mm Maximum sheet thickness (400 N/mm²): 3.0 mm Maximum upper beam stroke: 300 mm Backgauge system (U gauge): 10-1550 mm Optional extension: (-3050) Machine dimensions (largest possible option): 4360 x 5220 mm Basic machine weight: 4400 kg - Gedpfx Aox Hx Sljgbett Machine-specific data: Motorized operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2003 Condition: Refurbished – very good used condition Complete tool set, with specific max. sheet thickness 2-person operation from the front Second foot switch for operation from the rear (incl. light barrier for working from behind) 15" CNC color graphic touchscreen control panel Touch&More CNC rear gauge and support system (10-1550) Backgauge system (standard): 10-1550 mm - Sample images -

Condition: used, Year of construction: 2014, Paper size: max. 900 x 358 mm // Paper size min. 210 x 140 mm Paper weight max. 400 g/m² // Paper weight min. 100 g/m² Number of creases per sheet: 9 Max. number of folds per sheet: 2 Number of program memory slots: over 1,000 Min. distance between two creases: 40 mm Min. distance between two folds: 70 mm Min. crease distance from leading edge: 50 mm Min. fold distance from leading edge: 50 mm Min. crease distance from trailing edge: 50 mm Min. fold distance from trailing edge: 50 mm Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed) Up to 1,800 mm (manual feed) Fine adjustment in 0.1 mm increments Max. speed (A4): 6,000 sheets/hour Dimensions (L x W x H): 1,980 x 655 x 1,265 mm Weight: 190 kg Gtsdpfsx Hxxrsx Agbst Power supply: 230 V.

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW Godotpnpljpfx Agbett - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_24, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. Gtsdpfx Agox Atxiebet PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Condition: good (used), Year of construction: 1996, functionality: fully functional, Bobst Domino 145 II Matic Year 1996 Longitudinal seam Automatic bottom (3-point) 4/6-point gluing Gjdpfx Agox Aryfobott Cold glue system by Valco, year 2019, with 5 nozzles Hotmelt glue system by hhs-Xmelt, year 2017, with 3 nozzles Handle dispenser CoroPack 125 Bobst included, year 1996 – electronics are new.

Condition: used, functionality: fully functional, Year of construction: 1975, Mechanical Swing Bending Machine Gedsx An Tuopfx Agbott Make: FASTI Model: 208 2040x3mm Year: 1975 Technical Data Manufacturer: Fasti Model: 208-20-3 Year of Manufacture: 1975 Working length: 2040 mm Sheet thickness: 3 mm Upper beam stroke: 200 mm Stroke speed: approx. 7 mm/s Dimensions: Weight: Equipment • Swiveling upper beam • Motorized upper beam • Maximum upper beam opening: 200 mm • Lower beam adjustable beneath pivot point, 100 mm • Bending beam adjustable beneath pivot point, 100 mm • Bending beam swivels up to 180° • Backgauge adjustable from 0 to 600 mm • Various bending rails as shown in photo All information provided without guarantee. A powered demonstration is available at any time in our exhibition hall.

Condition: used, In this offer you purchase a used folding machine ‘Estefold ES-2400’ Object of sale: 1 x Estefold ES-2400 Condition: Gtjdpfxeukdcbs Agbet This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has not been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), Year of construction: 2004, functionality: fully functional, - Manufacturer: Stahl - Model: TI 52 - Machine type: Folding machine - Maximum sheet width: 52 cm - Typical application: Folding small to medium format printed sheets Gtodpsxby E Hjfx Agbot - Features: robust, versatile, compact design - Fields of application: commercial printing houses, bookbinderies

Condition: used, Year of construction: 1959, sheet width 2040 mm plate thickness 3,0 mm distance between columns 2060 mm adjustment of lower beam 110 mm stroke of upper beam 270 mm total power requirement 7,5 kW weight of the machine ca. 3,7 t Godpox Hp Aujfx Agbjtt dimensions of the machine ca. 3,1 x 1,5 x 1,5 m

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_16, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force Godex Atwlopfx Agbjtt - Tool library - FTP server connection

Condition: good (used), You are bidding here on: a branded set – folding bench and guillotine shear from a very reputable and well-known manufacturer – Schechtl. Device features: Folding Bench Schechtl KS - Rail bends cleanly – test possible - Angle display - Bending length slightly over 2 m - Sheet thickness 1 mm (Aluminum, zinc, etc. – up to 1.5 mm) - Standard rail – radius rail for aluminum and zinc also optionally available - Foot closer - Optional back gauge or beading device, etc. Guillotine Shear HT 200 - Capacity: 1.25 mm steel (more for aluminum, etc.) - Cutting length slightly over 2 m - Back gauge Gedpox Hiyaofx Agbett - Front support arms extendable Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauges – everything related to sheet metal and steel working, such as folding benches, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (bead forming devices, round rolls for gutter production, rear stops, etc.), as well as additional hand tools and spare parts from many leading manufacturers in our shop. I am always available for questions. You will receive an invoice with VAT shown separately. Loading is free of charge – weight approx. 750 kg, 650 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Pickup by the buyer (or a transport company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Article number: Folding bench KS and HT

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - General technical data (in mm): Bending length: 3,200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tonnes Backgauge system (U gauge): 10–4,050 mm Machine dimensions (U gauge): 4,620 x 5,480 mm Base machine weight: 11 tonnes Backgauge + U-form weight: approx. 1,205 kg - Machine-specific data: Motor drive; 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Gtsdpfx Aox Hf E Eegbet Condition: Refurbished – very good used condition Complete tool set 2-person front operation Second foot switch for rear operation (incl. safety light barrier for rear operation) 15" CNC colour graphic touchscreen control system CNC back gauge and upper holding system (10–1,550) Backgauge system (U gauge): 10–4,050 mm Photos are sample images

Year of construction: 2024, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: ZH-500, Folding and gluing machine for folding and gluing cardboard. Minimum size 3 cm, maximum 30 cm. Includes spare wear parts. The machine is as good as new and can be seen in operation in Enschede. Gedpex Hfh Hofx Agbjtt

Condition: used, Year of construction: 1984, functionality: unexamined, machine/vehicle number: 74082323, MBO T52-4X-Folding machine Manufacturer:MBO Model:T52/4X M-No.:74082323 Year of construction:1984 Format: 52x72 cm Flatpile Feeder, 4 Pockets, 4 Pockets, 1 Electronic Knife, Delivery Gtsdjwl Hcvopfx Agbet This professional 72 cm high speed folder (flat pile loader (deep pile), vacuum feeder wheel, 4 pockets, 4 pockets cross, 1 knife cross, counter) folds paper or other sheet materials in one handling job with 45,000 sh/hr. The sheets will be transported from the flat pile feeder with vacuum feeder wheel system to the folding machine and can be programmed to be (batch-) counted automatically. Specifications: Min. size: 105 x 150 mms Max. size: 520 x 720 mms Paper weight: 30 - 180 grs/m2 Speed: 1,000 - 45,000 sh/hr 4/4/1 folding machine with online edge trimming (optional), slitting and perforating wheels, retractable conveyor belt delivery. Digital operating console with controls, counter, batch counter Air and vacuum by 1 large heavy compressor/pump

Condition: used, sheet width 3020 mm plate thickness 3.0 mm ST upper clamping bar adjustment 150 mm Lower beam adjustment 125 mm bending speed ca. 6.0 sec / Hub bending angle max. 0 - 180 ° Control konv. work height max. 930 mm engine output 2.6 kW weight 3500 kg range L-W-H 3400 x 1200 x 1650 mm Features: - Robust electric motor-driven bending machine Gjdpfsxzuwdex Agbott - Control panel - front right (including control cabinet) - Bending angle adjustment via electric potentiometer - Manual lower beam adjustment - 1x replacement bending rail - 1x freely movable double foot switch - EMERGENCY stop button at the front - Operating instructions (PDF)

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_14, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters Gtsdpfjx Atwfjx Agbst - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Condition: new, Year of construction: 2014, You are bidding on: a branded machine - folding press - from a highly reputable and well-known manufacturer - HM. Device features: - HM folding press - Rail bends cleanly – test possible on site - Angle display - Bending length: 1270 mm - Sheet thickness: up to 3 mm (steel sheet, aluminum, zinc, etc.) - 4-segment rail, see pictures (extension rail also segmented) - Foot-operated closer - Partially electric: bends electrically, opening and closing mechanically by foot - Additional: previous owner installed a light with bracket and rear sheet tray (both removable) - Professionally welded, mobile machine frame - Original price over €13,000 Shear HT 100 and other models available optionally. Gsdpsx Hixpofx Agbett Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steelworking, including folding presses, guillotine shears, drills, slip rollers, slitting and profiling machines, accessory parts (beading units, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with stated VAT. Free loading possible – weight approx. 600 kg. Inspection and test runs are possible and encouraged by prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should take place within 10 days following the end of the auction. Location: 97261 Article number: Folding Press HM 251202.

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth Gedpfovxgm Nsx Agbott • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Gtedpfxjx Eiw Ts Agbet

Condition: refurbished (used), Refurbished envelope inserting machines TSI 2.0/2.5, identical to Quadient DS-40i Gtodpsx Eiwmofx Agbot

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_23, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed Godpfxox Atvuo Agbott 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Laser pointer Work light Side holder with color boxes TC12 touchscreen control 36 month guarantee

Condition: good (used), You are bidding on: a branded machine – a folding machine from a very reputable and well-known manufacturer, Schechtl. Current new price approx. €19,000 net. Machine features: - Schechtl HA folding machine - Bending bar operates smoothly – test possible Gedpfxsx E U T As Agbstt - Degree display - Bending length slightly over 2 m - Sheet thickness: 2 mm (steel sheet) – higher thickness possible for aluminium, zinc, etc. - Standard bar – radius bar for aluminium and zinc is also optionally available - Foot-operated clamp - Optional depth stop Guillotine shears HT 200 or Schröder electric guillotine shears 2 m – 2.5 mm are optionally available. Important: You may also purchase a wide range of machines and machine accessories (such as various bars, depth stops – anything required for sheet metal and steelworking, including folding machines, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories such as beading units, round rollers for gutter fabrication, back gauges, etc.), as well as further hand tools and spare parts from many top manufacturers available in stock in our shop. For any questions, I am always available. You will receive an invoice including VAT. Free loading is possible – weight approx. 1,450 kg. Viewing and testing are possible and highly encouraged by appointment by telephone. Payment upon collection in cash. Benefit from our experience and expertise— we are happy to advise you. Collection by the buyer (or a shipping company appointed by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Article number: Folding Machine HA 200

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_33, Electric pressing machine P1S-10 of the PRESSONE series by CoastOne from Finland with spindle drive. PressOne P1S-10 100kN pressing force 120mm/s feed speed 200mm/s opening speed Tool carousel for 4 lower tools Tool case with 22 pressing tools Side holder with color boxes TC12 touchscreen control 36 month guarantee Gtsdpfx Aex Atvhsgbst

Year of construction: 2025, operating hours: 25 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S10_27_1, PressOne P1S-10 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-10 Main press technology: ball screw with AC servo drive Maximum pressing force: 100 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: * 120 mm / s Press speed: max 10 mm / s Throat: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 5 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing Godpfsx Atuqex Agbstt - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection