Folding Machine

Hesse+Co GmbH unbekannt

Condition: like new (used), Gillardon pillar drilling machine, type GB 30 V, speed 60 - 1800 rpm, automatic feed, very good condition, tool holder MK 3. Nkjdpfsxpxbcex Ahvsu

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm Nksdjw Sthdopfx Ahvsu - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Nkedowftcvopfx Ahvju

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms Nsdpfx Asr Ngtishveku 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop Nodpfx Ajxacd Njhvjku - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Nedpfx Ahow Hx Tvsvjku Power 1.85 kW Bending speed 10 rpm.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Technical data: - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm Nksdorklfrepfx Ahvou - Weight approx. 2600 kg

Condition: good (used), Year of construction: 1988, Bending machine, folding machine, swivel bending machine, die bending machine -Handover: in the current condition as viewed -Function: Manual operation (no automatic operation) Nkodpfx Asv Tpxqehveu -Manufacturer: RAFAMET folding machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected load: kW -Dimensions: 1540/3350/H1510 mm -Weight: 3900 kg

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Nkodpfxjv Hygfo Ahveu

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working Nkedevgnm Hspfx Ahveu steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².