Used Flywheel for sale (150)

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Iedpfxjyxmm Is Aqusth Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: good (used), Code: 0285 Brand: CENTAURO Model: CO 800 - CE Standard Band saw for cutting wood, plastics, aluminium - CE Standard Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 500 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1625 x 940 x 2500 h Weight kg 630 Itodpfeyxmqgjx Aquoh

Condition: good (used), Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Ijdsy D Sk Nspfx Aqusth Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA Itodpfxou Nzwuo Aqujh rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) Iedpfju Nfttex Aquoth 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, rotational speed (min.): 1,460 rpm, rotational speed (max.): 1,460 rpm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 250 kg, INDUSTRIAL PISTON COMPRESSOR WITH SIEMENS 1LA3 11 KW MOTOR Industrial twin-cylinder V-configuration piston compressor driven by a SIEMENS 1LA3 three-phase motor. From an industrial company liquidation (insolvency proceedings) — not faulty, fully available for inspection. ═════ COMPRESSOR SPECIFICATIONS ═════ - Type: V-configuration twin-cylinder piston compressor - Cylinder head: heavy cast iron with cooling fins - Transmission: belt drive with large flywheel - Air intake: 2 lateral filters with caps - Electrical cabinet with main switch included - Robust integrated metal base frame - Machine N°: 1101 - Estimated capacity: 1,000-1,800 l/min - Working pressure: 8-10 bar ═════ MOTOR SPECIFICATIONS - SIEMENS 1LA3 ═════ - Brand: SIEMENS (premium German manufacturer) - Model: 1LA3 163-4AA-20 - Frame size: IEC 160M - Power: 15 HP / 11 kW - Voltage: 220/380V three-phase - Speed: 1,460 rpm (4-pole motor) - cos φ: 0.86 - Frequency: 50 Hz - Protection class: IP44 - Insulation class: B - Mounting form: B3 (foot-mounted) - Standard: VDE 0530 - Serial number: LCL2055152 - Connection: VAY 38/22 The SIEMENS 1LA3 series is one of the most reliable industrial motor lines, manufactured between the late 80s and mid 90s. Known for excellent winding quality, heavy-duty bearings, and exceptional longevity. Service parts and technical support available worldwide. ═════ INCLUDED IN THE SALE ═════ ✓ Complete twin-cylinder compressor head ✓ SIEMENS 1LA3 11 kW motor ✓ Belt drive system with large flywheel ✓ Two air intake filters with caps ✓ Electrical cabinet with main switch ✓ Robust metal base frame Itsdpozawudjfx Aquoh NOT INCLUDED: ✗ Air tank / receiver (must be added by buyer) ═════ CONDITION ═════ - From industrial closure (not from breakdown) - Good general appearance, clean and complete - SIEMENS motor — premium brand with worldwide service and spare parts availability - Sold as-is, full inspection welcome before pickup - No warranty implied ═════ APPLICATIONS ═════ Professional industrial compressor suitable for: - Medium-sized mechanical workshops with multiple simultaneous pneumatic stations - Metal and aluminum carpentry workshops - Body shops and industrial paint booths - Boilermaking with heavy pneumatic tools - General light industrial production - Tire shops and automotive workshops Equivalent new compressor on the market: €4,500-7,000 The motor alone (SIEMENS 1LA3 163-4AA-20 IEC 160M) has a standalone resale value of €400-700 as an industrial spare part. ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain - Weight: approx. 250 kg - Loading: forklift required at pickup - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport and customs

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate Itedpfx Aexggc Njquoh machine without flywheel drive motor and frequenzy regulator

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium Iedpfx Aqswuyzwsujth ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: used, mileage: 79,000 km, power: 100 kW (135.96 HP), first registration: 04/2020, fuel type: diesel, maximum load weight: 1,207 kg, overall weight: 3,500 kg, tire size: 16 Zoll, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 3,460 mm, loading space width: 1,570 mm, loading space height: 1,750 mm, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, electric window regulation, electronic stability program (ESP), full service history, non-smoking vehicle, onboard computer, power assisted steering, power mirror, sliding door, traction control, The vehicle is in excellent technical and optical condition. The vehicles for sale are inspected and repaired in our certified automotive workshop. Non-smoking vehicle. Equipment: First owner, recently used, Carrier Viento 2 refrigeration unit (down to approximately 2 degrees Celsius), cargo securing system with rail system, non-slip epoxy floor, air conditioning, comfortable driver's seat with armrests, touch screen navigation system with hands-free device, rear-view camera plus parking sensors at the rear, LED daytime running lights, mud flaps at the front, full-size spare wheel, electric windows and heated mirrors, second key, service booklet. 1-year Auto Helle warranty as per the warranty certificate. New oil change service. Itodpfx Aqoyh Nuvjujh Current vehicle inspection. Complete service history or digital service record. Clutch including dual-mass flywheel, new. Repair, service, and refurbishment costs are included in the purchase price. Financing possible. Subject to changes and errors.

Condition: used, mileage: 213,500 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, had accident, navigation system, soot filter, Transmission overhauled Clutch and flywheel replaced Special equipment: Airbag for driver/passenger side, all-weather/all-season tires, Cool & Sound package, driving assistance package, rear wing doors (opening angle 270 degrees), wooden floor in the cargo area, fuel tank: 105 liters, cargo area protection with securing element, sound-insulating cargo area partition, cargo area partition with window, cargo securing strap, parking pilot system, rear step, door locking system (deadlock), lashing rails in the cargo area - on the side wall, lashing eyes in the cargo area, laterally, adjustable, lashing eyes in the cargo area, laterally Additional equipment: Exterior mirrors, electrically adjustable and heated, single tires on 2nd axle/rear axle, generator 185 A, high roof H2, permissible total weight 3.5 t, interior filter: pollen filter, body/superstructure: standard high-roof box van, body variant: vehicle length L3, body variant: high roof (H2), adjustable steering column (steering wheel), headlight range adjustment, engine 2.3 liters - 120 kW biturbo CDTI, wheelbase 4332 mm, medium wheelbase, spare wheel in driving condition, sliding door for cargo/passenger compartment on the right, side marker lights, seats in the driver's cab: double passenger seat, steel rims 6.5x16, start/stop system, permissible total weight 3.5 t. Itodpfx Aoy U S Ensqujh

Condition: used, mileage: 272,600 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our terms and conditions Itsdpey U A S Sofx Aqujh

Year of construction: 2006, operating hours: 14,000 h, condition: used, functionality: fully functional, We offer a used Terex Fuchs MHL 320 material handler, manufactured in 2006. The boom with grapple has been refurbished, and new hoses have been installed. Excellent condition. Warranty included. Iodoy Uv Srepfx Aquoth Type and series: MHL 320 Serial number: 3201100680 Permissible maximum weight: 19500 kg Year of manufacture: 2006 Permissible load on the front axle: 10000 kg Permissible load on the rear axle: 10000 kg Net power at the flywheel: 84 kW Standard operating weight: 19000 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Iodjwhv Rnspfx Aquoth

Condition: used, Year of construction: 1990, functionality: fully functional, Meber SR700 band saw Year of manufacture: 1990 Heavy, precise industrial band saw designed for professional woodworking applications. It belongs to the SR series from Meber, which is characterized by high stability, precise cutting guidance, and a robust construction. Technical data Feature Description Flywheel diameter 700 mm Max. cutting height approx. 450 mm Itodpfxowri I Ij Aqueh Max. cutting width approx. 680 mm Blade length approx. 5,150 mm (depending on blade width) Blade width 10 – 50 mm Table size approx. 750 x 1,050 mm, tiltable (-10° to +45°) Motor power 4.0 kW Table height from floor approx. 900 mm Total height approx. 2,300 mm Weight approx. 700 kg Robust cast iron construction: Guarantees vibration-free and precise cutting guidance even for heavy workpieces. Large flywheels: Dynamically balanced and with rubber coating for smooth blade operation. Precise guide units: Height adjustable, often with roller or carbide guide systems. Safety devices: Emergency stop, foot brake Tilting work table: Enables angled cuts with high accuracy. Incl. 3 new saw blades

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Manufacturer: ASJ Type: J53-160B Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Itjdpfx Aexpf U Aeqush Weight: 8190 kg Table size: 560 × 510 mm Clear opening without table: 560 × 560 mm Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min Iedpfx Aqow U Ekpsueth distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, TECHNICAL FEATURES: Press Model: T25-VE Year of construction: 1996 Nominal force: kN 250 Free passage between the uprights mm: 220 Distance between the axis of the connecting rod and the uprights (notch) mm: 160 Dimensions of the mallet mm: 250x130 Worktable dimensions mm: 500x310 Minimum distance between worktable and mace with high adjustment and mallet all the way down mm: 275 Mace adjustment mm: 50 Adjustable stroke mm: 0÷60 Shank hole diameter mm: 40 No. strokes per minute: 155 Engine power KW: 1.5 Total mass Kg: 950 Operating voltage V: 380 Frequency Hz: 50 Dimensions mm: H=1890; L=1000; D=980 Lubrication pump motor power Kw: 0.09 Ijdpfxettwfys Aquoth Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts. NEW COMPONENTS INSTALLED: - Front and side safety guards with safety keys; - Motor bearings; - Tang locks; - Flywheel bearings; - Flywheel belts; - Work surface brightened on CNC machine

Condition: used, mileage: 283,400 km, power: 300 kW (407.89 HP), first registration: 09/2010, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, * Our internal reference number: 1081 * Vehicle currently registered and in operation – mileage and condition subject to change * Tourismo O 350 - 15 RHD (12 m version) * First registration: 09/2010 * 300 kW / 408 hp – EURO 5 (high-performance engine) * The following work was carried out at EVOBUS at the end of August 2025: * NEW CLUTCH * NEW DUAL MASS FLYWHEEL * NEW TRANSMISSION WIRING HARNESS * Cruise control * Retarder * 51+1+1 – total 53 seats * Armrests between double seats * WHEELCHAIR LIFT * Wheelchair space * Toilet * French inspection book available * Maintenance book also available * Alloy rims * New air conditioning service in 06/2025 Itodpfx Aqey T Dtnjuoh * New customer service in 06/2025, including e.g.: oil change, diesel filter, air dryer cartridge, oil filter, ... * The customer is obliged to independently inspect the condition and specifications of the goods/vehicle! * etc. * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Isdevgurcspfx Aqueth Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. Itjdpfx Aeyga T Nequjh The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Itjdpevxhb Uefx Aqujh Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 720 mm, table length: 1,000 mm, drop-through hole in table: 220 mm, ram adjustment: 120 mm, stroke adjustment: 125 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK Iedpfx Ajvyrywsqujth GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: new, Year of construction: 2025, pressing force: 125 t, table width: 700 mm, table length: 900 mm, drop-through hole in table: 210 mm, ram adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, Isdpfx Aqsvxhqvjuoth o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 900 mm, table length: 1,200 mm, drop-through hole in table: 260 mm, ram adjustment: 150 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES Ijdovyr Eaopfx Aqueth o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 700 mm, table length: 880 mm, table height: 850 mm, drop-through hole in table: 200 mm, ram adjustment: 85 mm, stroke adjustment: 110 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER Itodpsvxhprofx Aquoh o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg