Used Kaiser for sale (51)

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Accessories 2x various lifting straps and 1x chain length approx. 950mm * Lsdpfxeu Nvixo Ab Ushn

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min Ljdpfx Abswc U Nlj Ujhn distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Lhedpfx Abexnxk Is Uon Press force: 500 tons Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Straightening machine FECKER Max. strip width: 800 mm Max. strip thickness: 6.0 mm Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Lhsdpfx Abeuqdhwj Uen Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: used, axle configuration: 2 axles, wheelbase: 1,360 mm, loading space length: 7,850 mm, loading space width: 2,340 mm, loading space height: 1,480 mm, first registration: 04/1997, suspension: air, tire size: 445/65R22.5, Year of construction: 1997, Tyre size: 445/65R22.5 Lodpfsxnp Ikjx Ab Ujhn Suspension: air suspension Drive: Wheel Empty weight: 7.490 kg Carrying capacity: 29.510 kg GVW: 37.000 kg Make of bodywork: ROBUSTE-KAISER Tipper: Back

Condition: excellent (used), Year of construction: 1996, total height: 3,800 mm, ram adjustment: 100 mm, total width: 2,300 mm, total length: 4,000 mm, table length: 1,250 mm, table width: 900 mm, Decoiler DREHER Type 2370 BFPS YOP 1996   Straightning DREHER Lsdpfxouql Uls Ab Ushn KMV 400 YOP 1996 Capacity Kg: 125000 Table Length: 1250mm Table Width: 900mm Ram adjustment: 100mm Strokes: 30 - 180Min. Length: 4000mm Width: 2300mm Height: 3800mm Weight: 23080kg

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. Ljdpfx Abeu Icwge Ushn clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 Ledpfx Abjvut Uxe Ujhn with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: good (used), Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool Lhedpfxjb A Hvps Ab Uen -Quantity: 2x spindle tools -Intake: SK50 -Spindle dimensions: 145-230/225-310 mm -Price: complete -Weight: 14 kg/pc

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Lhodsvmfzhspfx Ab Usn Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Extended machine accessories Tool changing cart

Condition: used, New: Yes Empty weight: 5 kg Part suitable for: trucks Article nr.: B999965229-veiling Kaiser center-center 350mm tie rod Lsdjxhvw Sopfx Ab Uehn

Condition: used, overall weight: 29,000 kg, empty load weight: 7,800 kg, maximum load weight: 21,200 kg, axle configuration: 2 axles, loading space length: 12,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, first registration: 09/1968, suspension: steel, color: red, tire size: 235 / 75 R 17,5, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, leaf suspension, widenable to 3m, hydr. ramps, twin tires Lodei Rnwwopfx Ab Ushn Body: Hydr. ramps Length over axles approx.: 8200mm, length over pivot: 3200mm ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, axle configuration: 3 axles, first registration: 07/1989, suspension: steel, color: other, tire size: 235/75 R17.5, Year of construction: 1989, Axle configuration tire size: 235/75 R17.5 Brakes: Drum brakes Suspension: Leaf suspension Rear axle 1: Tire profile left: 60%; Tire profile right: 40% Rear axle 2: Tire profile left: 80%; Tire profile right: 80% Rear axle 3: Tire tread left: 45%; Tire tread right: 50% Weights Unladen weight: 9,400 kg Payload: 24,600 kg Lhsdpfxsxgyq Ts Ab Ujn GVW: 34,000 kg Vehicle condition Damage: none

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm dayligth 570 mm table surface area 1250 x 900 mm hole in the table 900 x 250 mm table height over floor 1000 mm ram surface 1100 x 700 mm Lsdovut Rtepfx Ab Ushn ram adjustment 100 mm material width 20 - 320 mm material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: automatic, actuation type: electric, working width: 200 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 300 kg, total length: 2,400 mm, total width: 800 mm, total height: 1,500 mm, Circular shears for cutting sheet metal in coils - Otto Kaiser - 1 cut Ideal for cutting rolls into narrow strips Cutting sheet metal up to 1.5 mm thick (steel ideally up to 1.2 mm) Width up to 200 mm Unwinding and winding of coils Lsdpjxf Trhefx Ab Ushn Speed ​​regulation via reducer The machine is installed in the factory and can be seen working. In working condition. Little used

Condition: used, Year of construction: 1990, machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Ledpfx Abeuqc Ezs Uohn Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Condition: excellent (used), axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 1,350 mm, first registration: 03/2001, suspension: air, tire size: 385/65 R22.5, Year of construction: 2001, Equipment: ABS, crane, = Additional options and accessories = - Air suspension = Remarks = Transport to Antwerp 590 euros Lhjdpfxjxfu Uqo Ab Uon = Further information = Axle configuration Tire size: 385/65 R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Steered Dimensions Dimensions (L x W x H): 1384 x 255 x 385 cm Weights Unladen weight: 10,400 kg Payload: 27,600 kg GVW: 38,000 kg Functional Lifting capacity: 17,500 kg Crane: HIAB 175 Extendable body: Yes Condition Technical condition: very good Visual condition: very good

Condition: used, axle configuration: 3 axles, first registration: 11/1988, Kaiser semi-trailer Leaf spring suspension!!!!! STEEL leaf suspension!!!!! Good condition Lsdpexc Ry Dofx Ab Uohn

Condition: ready for operation (used), Container size, width x length: 550 x 1000 mm Lhedpfxjixzy Hs Ab Uon Container depth: 600 mm Capacity approx.: 160 l Entry height: 670 mm Required space: 1150 x 900 x 960 mm

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Lhjdpfjvut Ixex Ab Usn Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 1980, machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Ledpfxouqc Hle Ab Ushn Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm Ljdsvuuf Sspfx Ab Uehn column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Ljdpjuqc Agjfx Ab Uohn Extended machine accessories

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW Extended machine accessories Lhjdpjw Tuqpofx Ab Uon Die lifters with balls for die change IMCO Press force measurement Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Ledpevmfznsfx Ab Ushn Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)