Used Flexible for sale (2,964)

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. Dsdpjyh Smbsfx Ac Njun ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Djdpeyh Sl Refx Ac Neun Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Dujdoww Iu Ropfx Ac Nen

Condition: ready for operation (used), Year of construction: 2018, A fully automatic and format-flexible Buhmann banding machine for jars is available. Banding output: 150single packs/min, jar diameter: approx. 67mm, jar height: approx. 53.5mm, machine dimensions X/Y/Z: approx. 5100mm/1450mm/2150mm, weight: approx. 1300kg. Including infeed with screw, rotary feeder with magazine, cup transport, outfeed, gluing unit and peripherals. Documentation available. An on-site inspection is possible. Duodpfx Asyhqbysc Njn

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Dusdpfx Aottbd Nec Njn

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_042025PA, type of input current: three-phase, total width: 2,510 mm, total length: 5,770 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, working width: 1,600 mm, total height: 50 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software Duedpfxjyh R Htj Ac Njn • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: used, Year of construction: 2004, operating hours: 10,948 h, 2004 | Soilmec R620 | Used Drill | 10948 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 121000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 55 approved ✅ 11 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: The drill is in good working condition. You can see the full report for all of the attachments that are included with the machine. Maybe new batteries will be needed, since the machine has not worked for about 1 year. The drill was not able to be fully tested on-site. It has a variable truck frame and 4 core drills. 📄 Want to see the full inspection, extra photos, or a video? Djdpfoygxtzjx Ac Noun Tip: The reference "40269 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2024, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm - Compact and maneuverable: Narrow design for easy maneuvering in small spaces - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Duodpsumv E Hsfx Ac Non Contact us for a customized offer!

Year of construction: 2019, condition: ready for operation (used), This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. • Laterally correct image (no reflection) for easy evaluation Dsdsx D I Etspfx Ac Njun • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings • Illumination: combination of contour (transmitted) and vertical (incident) light • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity

Condition: used, Year of construction: 2020, operating hours: 2,592 h, 2020 | Komatsu PC55MR-5E0 with 3 buckets | Used Mini Excavator < 7t | 2592 hours Dusdpfx Aox N Uvroc Nen 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 61 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good condition, everything works, no leaks, little play. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39342 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2012, operating hours: 2,093 h, 2012 | Terex Hd 1200 | Used Site Dumper | 2093 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 29 inspection points 19 approved ✅ 1 imperfect ℹ️ 9 issues ⚠️ 📌 Inspector's Comment: The unit would not start properly with the ignition switch. But the seller has confirmed that it is in ok running condition and just came back from rental. Djdsx Hqg Iepfx Ac Nsun 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40165 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent Hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric, from model year 2011 to current (Index H+I). The hood was tested in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transport. This does not affect the function of the hood, but for this reason, we are offering it at a special price. The RRP for this Ultra Vent Hood is €3,696 net. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • Professional overhaul / inspection and expert cleaning • Tested & fully functional—or your money back • Flexible delivery or self-collection options • Expert advice—before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 This Ultra Vent Hood features patented condensation technology, which binds and channels vapours and steam. Complex exhaust installation measures are a thing of the past. An external connection is not required at all. Installation is simple and even possible retrospectively. Technical Data: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Shipping: Dsdpfx Aewd Ixcsc Noun • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement • Subject to change and errors excepted Do you have questions, would you like advice, or wish to view the item on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2893/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Duodpfx Acett Sf Ee Njn Sales are subject exclusively to our general terms and conditions (AGB)

Condition: new, This is a solid stainless steel worktable, open on all sides, 6 adjustable feet, with a shelf and a 50 mm upstand. Due to its solid construction, it is also very suitable for food production facilities. The worktable is new and unused, still laminated. The price quoted is net less 25% special discount plus 19% VAT. Your offer price is €1133.82 net. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection flexibly selectable Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection in accordance with DGUV V3 seal TECHNICAL DATA: External dimensions WxDxH: 3400x700x900mm Backsplash 50mm open on all sides one shelf Condition: New, unused VERSAND / SHIPPING: Delivery or collection by arrangement Weltweiter Versand auf Anfrage / Worldwide shipping on request Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB) Dodpfx Acjlnl Rys Noun

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, This is a 115-liter MAGNUM 3/1 GN electric braiser from premium manufacturer MKN, model Optima 850. The braiser is a multifunctional appliance for steaming, boiling, simmering, braising, and roasting. Draining is done via a safety drain valve on the front. The appliance has been tested in our in-house workshop and is fully functional. The braiser has been completely overhauled and is in excellent condition. The stated price is net plus 19% VAT. Our used appliance service for you: • 6-month warranty on all electrical parts • High-quality brand-name appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or pickup options • Expert advice - before and after purchase • Provision of operating instructions, wiring diagrams & spare parts • Tested according to DGUV V3 Technical specifications: • W x D x H: approx. 1300 x 850 x 850 mm • Inner tank W x D x H: 700 x 540 x 250 mm • Power supply: V: 400 / kW: 19.2 • Serial number: 11203758 • Type: 2022705 • Year of manufacture: 2011 • Nominal capacity: 115 liters Condition: Used, fully Functional Further information: Dodpfx Asu S H D Nsc Noun •Multifunctional cooking appliance for steaming, boiling, simmering, braising, and frying •Braising pan made entirely of extremely corrosion-resistant chrome-nickel steel •Frying base made of special sandwich material (MKN PowerBlock), smooth and ground •Heating via SUPRA contact heating elements for optimal heat distribution and short heat-up times •Braising pan with raised rim, tightly welded •High heat capacity ensures even heat transfer and minimal temperature fluctuations when loading the plate with cold food •Equipped with electronic "Eco Control" control as standard •Equipped with a double-walled hinged lid and mixer tap as standard •Drainage via a front-facing safety drain tap Shipping: • Delivery or pickup upon request • Worldwide shipping upon request • Shipping to islands or mountain stations only upon request Do you have questions, would you like advice, or would you like to reserve something? View location? You can reach us by phone during our opening hours: Monday-Friday 9:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 23012209, This is a 2-burner stove from the premium manufacturer MKN, model Optima 850, year of manufacture 2023. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The stove is in very good used condition. You will receive an invoice with VAT shown separately. Dodpfxexb Agtj Ac Njun The manufacturer's recommended retail price (RRP) is €5,780 net. Our used equipment service for you: • 6-month warranty on all electrical components • High-quality branded appliances at fair prices • Professional refurbishment/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or pickup • Expert advice – before and after your purchase • Provision of operating manuals, connection diagrams & spare parts Technical data: • External dimensions (W x D x H): 400 x 850 x 700 mm • Type: Optima 850 Type 2063401 • Model: 2063401 • Year of manufacture: 2023 • Serial number: 23012209 • Weight: 47 kg Condition: Used, comprehensively inspected, fully functional Further specifications: • C-burner 3.5 kW (front), E-burner 7.0 kW (rear) • DN 20 (3/4") gas connection required • Heavy-duty removable cast iron grates • Open base with adjustable stainless steel feet Features: Atmospheric burners, pilot burner, thermoelectric safety device, universal gas valve, shut-off valve Nominal heat load: 10.5 kW, natural gas 20; 25 mbar or LPG 30; 37; 50 mbar Shipping: • Delivery or pickup by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Delivery time: Current delivery time under 10 weeks Duedsq Ikgyjpfx Ac Nen Features: • Box-motion end sealing • Manual reel fixation without compressed air • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets – Current new price approx. €250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process offering high throughput and consistent reliability. Advantages: Additional information about the bagging machine: System Dimensions: The overall system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The circular turntable (disc) features a diameter of 1.5 meters. Layout Flexibility: The system does not need to be installed in a straight line—it can be rotated 90 degrees in two segments to form a U-shape. This enables installation in constrained spaces without impacting operational performance. Please note: system height is fixed and not adjustable. Machine Output: The system delivers an output of approximately 500 kg per hour. Bag Sizes & Weights: Bag sizes can be fully tailored to your requirements, ranging from small bags of approx. 5 grams up to large bags of 20 kg or even 40 kg. Settings can be flexibly adjusted according to your production demands. Buffer Tank: The buffer tank offers a capacity of 20 kg. Maintenance Costs: Average annual maintenance cost, excluding materials and call-out charges, is between €1,200 and €1,500. Worldwide Shipping Available. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale buy dry ice blasting machine Dujdpfxew Ttxfj Ac Non Droogijsstraalmachine – dry ice blasting | dry ice machine | dry ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Cold Jet dry ice blasting machines, various models Service and repair of Cold Jet dry ice machines i3 Microclean Dry ice press Cold Jet NOZZITEC ASCO CRYONOMIC Kärcher ICEsonic ICS Dry Ice Südstrahl Dry Ice Energy White Lion Cryoblaster Triventek CRYONOMIC ICS Dry Ice NEWTEP / Wantong

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 700 kg, total height: 2,530 mm, total width: 1,213 mm, total length: 2,326 mm, table width: 500 mm, table length: 575 mm, warranty duration: 12 months, With the genius 700, a new dimension of die-sinking EDM begins for you. High rapid traverse speeds and reduced non-productive times ensure the genius 700 processes your jobs exceptionally quickly. The ratio of table size to travel distance is unique in its class, enabling you to make optimal use of the table surface. Within its category, the machine offers by far the greatest dielectric fluid height above the table. Adjusting the dielectric with the infinitely adjustable tank is quick and simple. The machine features high rigidity thanks to preloaded roller guides. The C-axis moment of inertia is comparatively high at 0.6 kg/m². In addition, it is equipped with a high-precision measuring system. Even demanding EDM processes can be handled on the genius 700 efficiently and with maximum precision. On-the-fly filter changes prevent downtime, and the centralized lubrication unit shortens maintenance times. The genius 700 can be connected from two sides, offering flexible positioning. The height-adjustable control panel is ergonomically designed and allows for seated operation. Travel X – Y: 400 x 350 mm Travel Z: 350 mm Table size (L x W): 575 x 500 mm Distance, table – quill or chuck max./min.: 550/200 mm Dielectric fluid above table: 420 mm Dimensions (W x D x H): 1213 x 2326 x 2530 mm Total weight (without fluids): 3200 kg Workpiece weight: 700 kg Electrode weight with rotary: 15 kg Electrode weight without rotary: 50 kg with manual securing Resolution X – Y – Z: 0.001 mm (optionally 0.0001 mm) Resolution C: 0.001° Dielectric tank capacity: 330 liters Generator: IPMtec (integrated) Work current: 52 A total; optionally 100 A total (+ 48 A) Booster: 196 A total (+ 96 A) Extraction capacity: 200 m³/h (55 l/sec) Duedpfxeyh Nfbs Ac Non Required cooling output: 2.5 kW Floor load: approx. 2.1 N/mm² Number of support feet: 3 Load per foot: 2 t Foot plate diameter: ø 110 mm Air flow rate: 10 l/min Required air pressure: min. 6 bar T-slots: Number / width / spacing: 4 slots / 10 mm / 3 x 100 mm Paper star filter: 1 piece Flushing unit: 1 pressure connection, 1 suction connection, 1 fine volumetric pressure connection Flushing flow regulator: infinitely adjustable Programming software: PROGmodEDM

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, empty load weight: 2,400 kg, maximum load weight: 1,100 kg, overall weight: 3,500 kg, wheelbase: 4,035 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 4,000 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, Peugeot Boxer 335 L4 BlueHDi140 Euro6 New vehicle platform chassis incl. box body in white Dedjpq S Ddopfx Ac Neun Mileage 5 km Fuel Diesel kW/hp 103/140 Manual gearbox 6 gear ccm 2.179 cm³ 3500kg Driving license class B Platform chassis, particulate filter, air conditioning, cruise control, daytime running lights, reversing camera, all-season tires, ESP, ABS, on-board computer, heated mirrors, electric windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Box body made of GRP Superlight in sandwich construction with alcove with a large sales flap on the right side of the truck. 3-seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various platform chassis are available (Fiat, Citroen, Peugeot, Renault). Box body interior dimensions WDH 4000 x 2250 x 2300 mm Side flap 3770 x 1480 mm Permissible total mass 3,500 kg / driving license class B Empty weight 2,480 kg Interior fittings and paintwork on request. Perfectly suited for a food truck, sales van, snack van, promotion etc. Price: 43,875.00 Euro net plus VAT We offer you customized lightweight box bodies on new or used chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design.We produce ourselves and in Germany. Our many years of experience and our broad-based service offer you a great deal of flexibility in the implementation of your idea.Every project has its own ID.

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Djdpfx Aowucmvec Noun Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Position 6: Roller Conveyors PRIESS-BMA DLS-CNC

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Duodog Ailcepfx Ac Non Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden battens, and sheet material. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (foot level plus 3 additional tiers). Each cantilever arm supports up to 500 kg, and each upright can be loaded up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments using the perforation grid. The fully hot-dip galvanized material ensures long-lasting protection for indoor and outdoor use – new stock available from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total rack row length: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Axial distance (upright spacing): approx. 131 cm - Levels: foot level plus 3 storage levels - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First perforation above base: approx. 107.5 cm (top of base) - Uppermost pair of holes: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted cantilever arms - Surface: fully hot-dip galvanized - Availability: New / B-grade return stock available from Wietmarschen warehouse SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made from IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made from IPE 80 (without stoppers) Duodpfxeyh In Uo Ac Njn - Incl. all connecting elements - Incl. all required bolts - 1 x load capacity sign Price: €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner hauliers – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our design department will be happy to prepare a non-binding quote tailored to your requirements. Whether new construction, modification, or expansion – we offer expert advice for your rack configuration. Still haven’t found the right solution? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You will find our phone number on our company page. You can reach us by phone Monday to Friday, 8:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Used pallet racking systems from SSI Schäfer are among the most sought-after solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses as well as industrial and logistics companies that require sturdy and long-lasting racking for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with high weights. Buying used here means you get certified brand quality at a highly attractive price – immediately available for new construction, redesign, or extension of your existing racking system. Individually adaptable: The frame uprights (Type P120) can be refitted to your desired height – professionally and precisely in our workshop. We deliver tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on variant) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 45 incl. floor positions - Design: Used SSI Schäfer PR600 - Availability: Immediately ex-stock, multiple units available Duedpfx Ajyh Inzoc Nen INCLUDED IN DELIVERY: - 06 × frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × beams approx. 270 cm (INP100 or CE110) - 40 × safety pins Price: 1080.00 € net 1285.20 € gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner freight company – freight costs dependent on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new builds, reconfiguration, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us at our showroom! On site, you can get a comprehensive overview of our pallet racks, storage racks, and further solutions. Many systems are assembled and can be experienced directly. Our specialist advisors are available for any questions and individual consultations – we look forward to your visit! Haven’t found what you’re looking for yet? Visit our website for a quick overview of many offers & variants of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, from 08:00 to 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2025, condition: new, functionality: fully functional, Electric Robot Movers Dujdpjyh Inujfx Ac Non Our electric robot movers are engineered for the safe, precise, and efficient transportation of heavy machinery and industrial installations. Thanks to their compact design and high load capacities, these movers are ideal for use in production facilities, technical installations, and other environments with limited maneuvering space. The movers are fitted with a hydraulic lifting cylinder, enabling controlled lifting and movement of loads. Operation is fully managed via a wireless remote control, allowing the operator to remain at a safe distance while maintaining maximum control during transport. Both the robot mover and the remote control are battery-powered and charged using a standard 230V connection. This ensures flexible and emission-free operation, independent of external hydraulics or combustion engines. Advantages of our electric robot movers: - High load capacities (up to 80 tons) - Precise positioning and smooth travel movements - Compact design suitable for confined spaces - Emission-free and low noise - Safe operation via remote control - Quick deployment and minimal setup time Our robot movers are frequently used for machine relocations, production line adjustments, maintenance activities, and internal transfers within industrial environments.