Used Flex 5 Aggregat for sale (23,448)

Condition: like new (used), Hello, We are offering new Homag Benz, Homag drilling systems, Weeke, and Benz adapter units for sale. Flex 5 Plus, adjustable saw units, lock case units, tracing milling, etc. Please contact us so we can provide you with a suitable quote. Units are either new and tested or completely overhauled. Prices vary depending on the unit. The unit comes from customers who switched to 5-axis machining and no longer need it. Knsdpjvftu Hefx Afiec Only tested units leave our factory. Do you need other spare parts for older machines, or repairs for drilling gearboxes and milling spindles?

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Kjdpfswb Trpjx Afisnc Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamps, PV roof hooks -Manufacturer: Parco, Solar fastener roof hook adjustable 20 pieces/box -Type: Zinni Flex 150 x 60 x 5 -Article No.: 574DHVS -Material: stainless steel 1.4016 -Quantity: 27 boxes available -Price: per box Kodpotpyq Hefx Afisnc -Dimensions box: 350/230/H235 mm -Weight: 17.8 kg

Condition: used, Light barrier, safety light curtain, switching part, control unit, control box -Manufacturer: Leuze lumiflex, switching part control unit ULS-5 -Voltage: 230V Ksdep Hiy Eepfx Afisnc -Quantity: 1x switching part available -Dimensions: 250/120/H80 mm -Weight: 2.5 kg

Condition: used, Year of construction: 1989, DCM HAC 1400/5 Flexographic 5 Colour Printing Press (1989) With Inkmaster Ink Dispensing system Comprising of: ENR web feed (1994) DCM web cutting (1994) AFS Corona AVE-150D surface treatment system (2021) Inkmaker PICCS15-21-007 ink dispensing system Knodexn N U Repfx Afioc

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Kedot Ac Efopfx Afisnc Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm Kjdpfxjb A H Elo Afijnc -Weight: 0.6 kg

Condition: used, Metal band saw blade, band saw blade, metal saw band Kodpfx Aod Ngp Iofienc -Condition: unused -Price: per piece -Number: 5x sheets available -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut - Electronic Suspension Motors: In stock at Kinket SSP B.V. These pendant motors offer an excellent solution for many industrial applications such as grinding, polishing, brushing and milling. Features 5 x Pferd Mammut - Electronic Suspension Motors: Infinitely Adjustable Speed: The Pferd Hang motors are equipped with an infinitely adjustable speed, from 100 to 10000 rpm. This allows you to choose the optimal speed to suit the specific tasks and materials you are machining. This gives you complete control over your machining processes. Complete Package for Direct Use: At Kinket SSP, we supply used hanging motors including the necessary trailing contacts and a 12-meter long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing or other industries, these flexible shaft pendant motors offer versatility and performance to meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each of the machines has been meticulously inspected. Summary: 5 x PFERD flexible shaft machines 5 x suspension brackets 5 x flexible shaft 12x2000mm 5 x straight handpiece 1 x 12 meter long VAHLE contact rail Knodstvfnuspfx Afisc These machines are completely similar to the Suhner Rotomax suspension motors. Current new price approximately: €36000 Selling price of this well used set: €25000 We also have several new and used flexible shaft machines available from stock ( about 30 pieces ) of the brands Suhner / Biax and Pferd. So if you are interested in a mobile or standing machine is also possible. We also have several used and new handpieces in stock. Orbital sander / right-angle handpiece with pin or m14 thread etc. Please ask us for the current offer.

Condition: used, Year of construction: 2010, 10 UV Printing units 1 x Unwinder 1 x Turnbars 4 x Delam – Relam in 1, 2, 3, 4 Printing Units 1 x Double-Layer Station 2 x Hot Air dryer in printing units 1 and 10 1 x Web cleaner Knsdpfx Afsv Rmr Ajioc 1 x Web Coronation unit, 1 x Die-cutting unit with Gapmaster and Label Shifting Unit 1 x Inspection unit (Video system BST) 1 x Edge trimming 1 x Top-conveyor for endless removal of the matrix after the die-cutting 1 x Cold lamination unit -- Unwinder and rewinder placeable in units 1-10 1 x Rewinder

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min Kedpoivqm Eefx Afienc -Individual components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg

Condition: excellent (used), Catalog number 7640 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 2 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA - max planing width 610mm - max planing height 200mm - from above: - input pulling shaft, toothed - pawls - pressure - 2 pulling shafts, toothed - pressure - 610mm planing shaft, 6-knife 15kW - pressures - pulling shaft, smooth, output - from below: - side pressure at the input - guide strip - input table - pulling shaft, toothed - 610mm planing shaft, 6-knife 7.5kW - 2 smooth pulling shafts - side pressure at the outlet - at the back: 2 side spindles + pressures: 1) vertical right 200mm 15kW 2) vertical left 200mm 15kW - left vertical spindle electrically adjustable right/left - spindle diameter 40mm - spindles set alternately - spindles adjustable up/down, right/left 3) additional horizontal lower spindle 160mm, adjustable up/down + right/left 5.5kW - spindle diameter 35mm - at the outlet: 2 upper metal sliding rollers, 2 lower pulling rollers, rubber - adjustable rollers in the lower table - electric planing height adjustment - 6 types of feed speeds 12.8/16.3/20/25.6/32.6/40m/min - feed motor 8kW - diameters of the exhaust port 2×120, 2x160mm - dimensions length/width/height 2980x1980x1800mm - weight about 3500kg Net price: PLN 66900 Ksdpfxowgayqe Afienc Net price: EUR 15740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), functionality: fully functional, mileage: 540,000 km, power: 323.62 kW (440.00 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2011, first registration: 07/2011, Equipment: ABS, crane, cruise control, differential lock, hydraulics, Good condition! Ready to drive! 6X4 LEAF/AIR SUSPENSION Knodpfx Ajufch Dofiec Crane Hiab 211-5 with radio (year 2011) 5 extensions with rotator (15m) Euro 5

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Electric chain hoist 3000kg 18m lifting height Nitchi industrial crane For sale in excellent condition NITCHI MH-5 thr chain hoist crane 18 meters lifting height. makeNITCHI MH-5 year of manufacture: 2016 Kodpfx Aowbwfasfionc load capacity 3000kg / 1 branch lifting height: 18 meters lifting speed: 4.4 meters / minute mains voltage: 3 phases 400v 50Hz electric power: 2.5kw 6.9 A 1-speed manual control chain holder. weight: 130kg

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible. Knedpfjxny D Nsx Afioc

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Kjdpfx Aowd Ng Uefienc Annual maintenance by Trumpf

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Kjdjwak U Ejpfx Afisnc Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: used, Year of construction: 2010, 5-axis machining center Leadwell V40L Kjdpoxmgb Sofx Afienc 24-position tool changer Control Fanuc OI-MD Year of manufacture 2010 Farshbaf

Condition: used, diameter div. Knedpfeww Nb Eox Afijc number 36x tool adaptor BT 40

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, throat depth: 180 mm, pressing force: 5 t, table width: 450 mm, table length: 320 mm, operating speed: 300 mm/s, overall weight: 270 kg, type of input current: three-phase, oil tank capacity: 9 l, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Kjdpfxjvbdpyj Afienc Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: used, functionality: fully functional, Specifications: - Length: 270 cm - Height: 10 cm - Width: 5 cm - Shelving system: Dexion - Type: P90 - Includes locking pins - Used item from stock - Good condition. - Available for immediate delivery! -- MULTIPLE ITEMS AVAILABLE IMMEDIATELY-- Price: €23.00 net €27.37 gross You will receive an invoice with VAT. Transport: Delivery is available upon request via our partner shipping company; the costs depend on the zip code. Kjdpfxoxnxavo Afijnc Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to help you realize your projects, from planning and ordering to installation.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Knedpewzvzgefx Afioc Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: good (used), Year of construction: 2014, 155 USED Freezer, walk-in freezer. Knodexgp Iuepfx Afiec Important: This appliance does not include any external units. TECHNICAL DATA: - Internal temperature: -18 to +20°C - Power: 13.5 kW - Year of manufacture: December 2018 INTERNAL DIMENSIONS (in cm): - Width 370, - Length 610, - Height 250. EXTERNAL DIMENSIONS (in cm): - Width 390, - Length 653, - Height 280.

Condition: excellent (used), Catalog number 7252 TECHNICAL DATA - spindle diameter 25mm - spindle working height 170mm - spindle rest - replaceable spindle Knodpfsrgqgyex Afisc - spindle locking - top adjustable up/down - original guide - 4 types of rotation speeds + right/left 3000, 4500, 6000, 9000rpm - top dimensions 980x980mm - 3kW motor - dimensions length/width/height 1100x1000x1370mm - weight 682kg ADVANTAGES - German production - spindle rest - very good condition - used milling machine Net price: PLN 6900 Net price: EUR 1620 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg Knodpfx Asvllxdsfioc The radiator has been technically inspected, fully functional