Used Flexible Shaft for sale (8,988)

Condition: excellent (used), Year of construction: 2022, NiroTech RX200 Twin shaft paddle mixer Serial: 3052022 Iiodpfx Asy Egdmjqujc 2022, Stainless, twin shaft paddle mixer, variable speed, forward and reverse, guarded lid, manual discharge door, 3Ph

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Iijdpeyu Srmefx Aqusc Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Iisdpfx Aqoy D Niceuoc Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2015-26004, power: 5.5 kW (7.48 HP), 1.3 Fine Crusher System FB 1000 DS1 Fine Crusher FB 1000 DS1 FG3 Drive power: 5.5 kW + 3.0 kW Design: Iijdpfx Aeyvfhwsquec 1 x cutting roller with spike discs (upper) 1 x dosing roller with spike discs (lower) Maximum processable panel thickness: approx. 100 mm Maximum processable density: 50 g/liter Clear width: 1000 mm Infeed height from conveyor belt: 180 mm Additional protective cover on conveyor belt (site-installed) Screw conveyor discharge for Fine Crusher FB 1000 DS1: Drive power: 0.75 kW Intake nozzle: NW 200 mm Incl. maintenance hatch with safety switch

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, power: 2 kW (2.72 HP), filling opening width: 1,250 mm, filling opening length: 1,000 mm, overall weight: 1,300 kg, Technical data: Hopper opening: length x width 1250 x 1000 mm Length x width: 1250 x 1000 mm Cutting unit opening: 562 x 462 mm Feed opening: 1250 x 1000 mm Length x width: 562 x 462 mm Number of shafts: 4 pcs of which: cutting shafts 2 pcs Iiodjyma Tiepfx Aqusc cleaning shafts 2 pcs Number of cutting discs: 23 Shaft speed: 25 rpm.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 400 mm, number of blades: 27, total length: 1,820 mm, total height: 1,730 mm, total width: 1,300 mm, rotor length: 800 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Feeder dimensions : 1200 x 1090 mm Drive motor power : 18 kW Knives on rotor : 23 + 4 Iisdpferdgmujx Aquoc Fixed knives : 4 Weight : 1750 kg In the offer , we constantly have dozens of crushers , mills , injection mills , etc. We are a reliable contractor, thousands of customers have already trusted us. Vision single-shaft crushers are small and medium-sized machines suitable for processing a wide range of materials. These products can often be sold as a destination such as alternative fuel. It also happens that crushers are the first of the equipment working in a specialized processing line. Capacity usually varies between 300 - 5000 kg/h + depending on the model, type of material and application. Unused machine available off-the-shelf, possible tests before purchase. If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Ijdpjft U Sajfx Aqusic Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Iedpfed Sblmex Aquoic Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Working width: 1000mm

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: Ijdpfx Aqsyrfgrjusic – New paintwork Includes: control cabinet, frame & hopper

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Iisdpfewaiaasx Aquec

Condition: excellent (used), 2 complete sets of white metal main bearings, each set consisting of 4 bearing shells, bearing inner Ø = main shaft Ø 140 mm, bearing outer Ø 200 mm or 220 mm, width of each shell 100 mm Iodpfowv Rphex Aqueic

Condition: good (used), Slotting bed for four-sided planer WEINIG Unimat 23 with 6 spindles. Used condition Iisdpounbuvjfx Aqusc

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Iiedpfsv Hr Nxex Aquoc

Condition: used, Year of construction: 2014, two identical machines available, were in production until April 2025. Can be supplied with or without loading hoist for 200 litre tote bins. Machines were supplied new by Multivac UK and have come from a bakery where they were mixing fillings for pasties and sausage rolls. Iijdewd Un Rjpfx Aqujc

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet Iiodol I Dx Nepfx Aqujc incl. 7 unused spare coils

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor Iijdpfx Ajt S Sxgsquoc

Condition: new, Year of construction: 2026, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. SPECIAL PRICE, Iijdpfxjx Urucj Aqujc OFFER OF THE MONTH UNBEATABLE PRICE

Condition: new, Year of construction: 2026, The SQUALO 522 Multiblade or Double Shaft Multiblade Circular Saw is a technological machine, essential in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, trimmed boards, prisms, tablets, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Double shaft multi-blade: Squalo 525 motor powers from 55 to 132 Kw Iijdpolz S Rbofx Aquec Description Details Conveyor belt width mm 520/620 Width Conveyor rollers at the entrance mm 510 Width Conveyor rollers at the exit mm 610 Max saw group width mm 500 Max cutting height mm 220 Min. Length of work mm 1000/1200 Max passage width mm 800 Blade shaft diameter mm 80 Max diameter circular blades mm 400 Blade hole diameter mm 100 Blade shaft speed rpm 3.800 Speed of advancement mt/min 3 – 60 Weight 9.500 – 10.500 Kg Overall dimensions mm 2720x2515x2105h

Condition: new, Year of construction: 2026, The PIRANHA 310 Multi-blade or Multi-blade Circular Saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Isdpfjhpbu Rsx Aqusic SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: ready for operation (used), Year of construction: 1999, EUREC Model Z85 Twin-Shaft Tracked Shredder, complete with folding discharge conveyor Year: 1999 Weight: 32 tons Dimensions: Shredder feed opening width: 2.30 m Shredder feed opening length: 1.80 m Shaft length: 1.85 m Conveyor length: 8.60 m Conveyor width: 1.40 m Hopper length: 5.40 m Hopper width: 2.50 m Engine: CUMMINS 6-cylinder turbocharged, 462 hp Ijdpfxey Id I Io Aqueic Engine power: 336 kW Complete with documentation Ideal for the following materials: waste, plastics, wood, light metals, bulky waste, aluminum, sheet metal, etc.

Condition: used, Andritz twin-shaft lump breaker / clod breaker Fully constructed in stainless steel Isdpfx Aqsy Iclreueic Motor power: 15 kW Rotor speed 1: approx. 600 rpm Rotor speed 2: approx. 300 rpm Inlet dimensions: 600x300 mm Installation height: 420 mm See our other listings

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard Isdpfx Aey H Ikqsquoic - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Errors / input mistakes excepted.

Condition: new, Year of construction: 2026, Shredding shafts for Arjes Tytan 900 / 950 - for mixed waste - for wood - for metal Iiedpfjyf Uyzex Aqusc - special shafts - other

Condition: like new (used), Year of construction: 2024, functionality: fully functional, rotor diameter: 640 mm, number of blades: 62, total length: 2,000 mm, Vecoplan original rotor for VAZ2000 60x60 mm cutters hardfaced rotor includes cutters Iiodpfxovktr As Aquec

Condition: excellent (used), BATCH-SIZE ONE - FULL CNC Flexible LINE for Drilling, Routering and hardware Inserting process, for the Front doors (of furniture). With Numerical Control NST panle PC W2k (FERRO CAN BUS) Composed by: A) WORKPIECES LOADING SYSTEM (Infeeding Hedgehog Buffer) B) FLEXIBLE DRILLING-INSERTING MACHINE Mod. BAT-RTW-CNC With 4 working stations: - Station No. 1: Workpieces (panels) in-feed and positioning - Station No. 2: Drilling and routering - Station No. 3: Inserting (hinges, adapters and shock absorbers) - Station No. 4: Workpieces (panels) release and out-feed C) WORKPIECES UNLOADING SYSTEM (Outfeeding Hedgehog Buffer) Iodoyzyy Tepfx Aqujic To process panels with following dimensions: - LENGTH: MIN mm (194) 270 - MAX mm 1450 (1500) - WIDTH: MIN mm 130 (120) - MAX mm 700 - THICKNESS: MIN mm 13 - MAX mm 40