Used Flexible Shaft for sale (8,989)

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 technical data Iiedjn Atchspfx Aquoc center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Iiedpferrhczox Aqusc Machine weight: 9000 kg Machine in operation

Condition: good (used), Year of construction: 2005, functionality: fully functional, LINDNER KOMET 2200 SHREDDER Ijdpfx Aqozd Hqhsujic Shredder for Refuse-Derived Fuel (RDF) and plastic Two 132 kW motors Number of blades on the rotor: 60 Blade dimensions: 175 x 57 x 28 mm Number of fixed blades: 12 Screen with a 30 mm hole diameter Production: 7 tons per hour Year: 2005

Condition: used, Year of construction: 2014, operating hours: 8,150 h, functionality: fully functional, machine/vehicle number: 600-687 und 610-352, overall weight: 1,000 kg, rotor diameter: 252 mm, number of blades: 14, total length: 5,100 mm, total height: 810 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, control cabinet height: 215 mm, total width: 1,100 mm, power: 16 kW (21.75 HP), type of input current: three-phase, rotational speed (max.): 590 rpm, filling opening width: 300 mm, filling opening length: 3,000 mm, sieve perforation: 10 mm, extraction nozzle diameter: 200 mm, input current: 45 A, infeed height: 450 mm, Equipment: CE marking, documentation/manual, Horizontal shredder with vibrating chute Weima WLH 300 and WRR 300; manufactured in 08/2014 - Ideal for shredding long and short pieces of wood - Automatic start-up via photoelectric sensor Iisdszd Dhdjpfx Aqusc - Noise protection hood in the infeed area to reduce noise emissions

Condition: excellent (used), functionality: fully functional, Motor power 2.2 kW Manual feed of the aggregates Blade diameter 330 mm 3000 rpm Iiodjy N Ribjpfx Aqujc Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Cutting process started by foot pedal Safety switch Width 900 mm, height 1500 mm

Condition: good (used), For sale: a professional, very heavy-duty, and stable twin-blade hydraulic saw from the renowned Turkish manufacturer RULMAK, model RM.HCD.1. The machine is designed for continuous operation in demanding sawmill environments – ideal for quickly cutting thick timbers, blocks, and producing pallet components or garden furniture elements. ⚙️ Key Features of the Machine: Smooth feed rate adjustment via a frequency inverter: Ensures precise and rapid adjustment of the feed rate (controlled from the control panel) to the hardness and dimensions of the wood being processed. Extremely powerful main motors (2 x 75 kW): A total of 150 kW of power guarantees that the machine will not slow down even under maximum load and when working with hard, wet, or frozen material. Substantial weight (5500 kg): The very heavy, stable frame made of thick-walled steel effectively dampens all vibrations, which translates into perfect quality of the cut material and a longer service life of the bearings and blades. 📊 Full Technical Specifications: Manufacturer: RULMAK Model: RM.HCD.1 Year of manufacture: 2007 Design: Twin-blade (upper blade + lower blade) Power supply: 400 V / 50 Hz Iijdpfx Aqezdwhkjuec

Condition: used, machine/vehicle number: 008608, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Iisdpfxozcmn Se Aqusc Total number of drilling spindles: 84

Condition: ready for operation (used), Intel PBA 455084-002 Flexible Disc Controller Card used 100% functional Iiedpfoi Ebt Eox Aquec

Condition: repair required (used), Year of construction: 1994, machine/vehicle number: M-204, rotational speed (max.): 20 rpm, power: 44 kW (59.82 HP), input current: 84 A, input voltage: 380 V, type of input current: three-phase, We are offering this used MeWa UC140 two-shaft shredder, manufactured in 1994, for sale. Rated voltage: 380 V Power: 2 x 22 kW, BG 180 Frequency: 50 Hz Current: 84 A Cutting head size: 1,055 mm x 1,460 mm 87 mm wide cutting discs 03/04 pieces of cutting teeth arranged in a spiral pattern around the circumference to ensure optimal material feed. 45 mm cutting tooth height, including the corresponding spacer rings and scrapers. Iiodpfozdq Epox Aquec One shaft has suffered a shaft fracture. The machine has seen little use overall and is being sold with a control cabinet. Sold without warranty, as is, and as defective. Sale by auction. If you have any questions or require further information, please send us a message or call us.

Condition: repair required (used), Year of construction: 2024, functionality: not functional, machine/vehicle number: 4811XX, overall weight: 27,400 kg, SALVUE, on behalf of our client, is offering this Komptech Terminator 5000S Shredder (year of manufacture: 2024) in defective condition. The machine has sustained fire damage. Iiodpozdpvyofx Aquoc Please contact SALVUE for further details.

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm Iiedpfszcc E Hjx Aquoc - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm Iiedpfxjzcck Ao Aqujc - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: used, functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 760 mm, Untha RS 40 shredder Power: 2 x 18.5 kW Electrical cabinet: Siemens Simatic Chamber dimensions: 700 x 760 mm Screens. Hopper. Weight: approx. 2100 kg New oil. Machine in fully working order. Price upon request. More photos and a video of the machine in operation available upon request. More information available by phone. Ijdpfx Aqszdldgjusic

Condition: ready for operation (used), Measuring and evaluation electronics: Rotortest 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible. Iisdpfx Ajzdkpnoqusc

Condition: new, Saw shaft and saw bush Iijdpfxenladho Aquec Tool shaft and clamping bush

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - Power output: 450 kW DC - with ABB frequency inverter including DTC control - Bevel-spur gear - roller speed up to approx. 32 rpm / variable via belt drive and frequency inverter control. - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Stepless speed control - Tooth type: Form C3 trapezoidal tooth, 174 mm Iodpfxex I A Ake Aqusic - Armor plates as wear protection on the roller - Hydraulically adjustable counter comb - cutting gap adjustment on the display - 4 comb cylinders - Central lubrication - Hydraulically opening comb flap - Pre-assembled main control cabinet - On-site operating unit on the machine - Start-up warning - Motor compartment lighting - Paint finish: RAL 2011 traffic orange The machine has the following additional equipment: - Guide rail limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine stand, height 1,200 mm - Hopper attachment, 3-sided, left or right - Flashing light module - Solenoid valve for spraying system with water - Radio remote control (EU) - Profibus integration - 2 additional power outlets on the control cabinet, up to 7.5 kW - Control cabinet container / air-conditioned, LxWxH 5,000 x 2,400 x 2,600 mm - Lower conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Upon request, the machine can undergo extensive refurbishment at our factory. Other: - Display in German, English possible - Stickers and labeling on the control panel in German, English possible - Warning stickers in German, English possible - Operating manual in German (paper and digital) (optional for local translation)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, power: 2 kW (2.72 HP), rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each Iedozdf Ruspfx Aquoic 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Ijdpfx Aqsxx Tfzjueic Overband magnet for rear conveyor Frame for overband magnet Spraying system

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. Iisdpfx Asiwa Hcjqusc -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Iijdpfx Aqjyuvr Rjujc

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,451 h, functionality: fully functional, machine/vehicle number: W09307330E2D38070, Equipment: AdBlue, Shredder/Crusher Doppstadt DW-3060 SA - Year of manufacture: 11.2014 - Mercedes-Benz internal combustion engine - AD Blue - Euro 6 - VIN: W09307330E2D38070 Iisdpfx Aozcwziequec - Machine mounted on a three-axle trailer chassis - Shredding shaft, 3m long, diameter 0.60m - Magnetic separator - Additional hydraulic outlets - Hydraulic drive - Hydraulically extendable support leg with wheels - Ready for operation - VAT invoice available Contact: 607-53-88-55

Condition: excellent (used), Catalogue number 7960 TECHNICAL DATA - Max cutting height: 140mm - Max workpiece width: 700mm - Working width of saw shaft: 580mm - Shaft diameter: 70mm - Max saw blade diameter: 400mm From above: - Kickback pawls/anti-kickback devices - 2 feed rollers, toothed - Metal slip roller From below: - Slip roller - Kickback pawls - Smooth feed roller - Saw shaft - Smooth feed roller - Metal slip roller - Stepless feed speed adjustment via inverter - Feed motor: 3kW - Main motor: 22kW - Overall dimensions (L/W/H): 1600x1300x1900mm Iijdpfx Ajzbayxjquoc - Weight: approx. 2000kg Net price: 46,900 PLN Net price: 11,170 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Unloading at the bottom Ijdpfxeza S Dts Aqujic 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled)

Condition: excellent (used), I am offering for sale a professional, industrial-grade, twin-arbor multi-blade saw from the renowned A.COSTA brand, model PUMA. The machine has been serviced and is ready for immediate operation in the most demanding sawmill or industrial woodworking environments. Its robust construction, combined with powerful drives and modern control systems, makes it a machine with exceptional performance. Key technical parameters and advantages of the machine: Powerful main motors: 2 x 55 kW – ample power reserve guaranteeing smooth and trouble-free operation without any drop in RPM, regardless of the hardness of the wood being processed. Maximum cutting height: up to 190 mm. Modern feed system: Smooth feed speed adjustment via an inverter. This allows for perfect adaptation of the operating parameters to the specific material and optimization of the cutting process. Condition of the crawler tracks: Like new – ensures perfect grip, stable and precise material guidance without slippage. Precise control: The machine features an electronic height display. Iiedszchy Aepfx Aquec Additional information: The ergonomic control panel shown in the pictures, with clear ammeter indicators for both arbors, allows for constant monitoring of the engine load. The A.COSTA PUMA is synonymous with reliability and robust construction, ensuring trouble-free operation for many years to come. Please contact me for further technical details and to arrange a viewing.

Condition: new, Year of construction: 2024, Model Type: Hammel, Arjes, Lindner Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 Iedpfxor Nf Rle Aqusic VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metal construction company specializing in the manufacture of shredding tools for shredder machines with an attached welding shop. Our experienced team is proud to offer high-quality and customized solutions. We focus on quality, innovation and customer satisfaction to ensure that our products fully meet our customers' requirements. Our customers come from various industries, including waste management, recycling companies and machine manufacturers. We maintain long-term partnerships and are happy to supply our products and services to companies looking for reliable and high-performance shredding solutions.