Used Flatbed Semi Trailer for sale (18,630)

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, total width: 2,480 mm, Equipment: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick loading surface, hydraulically liftable and lowerable loading area behind the gooseneck, approx. 2,800 mm long, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) over the axles, checker plate covering Two-part steel ramps: * One pair galvanized two-part steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on an area of appr. 20 x 20 cm) * Ramps with hydraulically extendable and retractable sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not have to be included in the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Colors: * Trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel carrier under the loading area, right-hand side in direction of travel * 2-inch kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holders on the front wall * 3 levels of wooden slats * Galvanized folding supports under the rear slope of the loading platform * Adjustable curtain body height approx. 3,960 mm * Galvanized front wall with tension mechanism for sliding curtains * Roof from EDSCHA, adjustable in height by approx. 400 mm, can be slid forward on aluminum roof beam profiles (bolted to front and rear wall) * 3 pairs of sliding stakes in the loading area * Body hydraulically extendable by approx. 750 mm left and right at the rear * Sliding tarp with approx. 700 mm length reserve, tension straps at approx. 600 mm intervals in height * Top edge of body approx. 3,960 mm (laden) * Driving with open sliding roof is not permitted and will damage the tarp Blsdpfx Adey Nu Hkorji * A painted sand layer as anti-slip coating on the gooseneck and loading area checker plates * Cover plates to bridge the gap between ramps and loading area * Electro-hydraulic unit at the rear under the loading area * Mountings for warning boards, including socket, on the left and right of the gooseneck and ramps * Ramp control valves installed on the right side of the trailer * Grating in the gooseneck slope C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the load f

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Bodpfsi Rixksx Adreli Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake Bjdpfx Adoi Ri Eujreli 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: used, Year of construction: 2010, 2010 | Schmidt SKI 24 | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18000 or Make an Offer. Bljdey U Nkuspfx Adroi Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 11 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Rear door doesnt shut well , left stampframe cracked needs to be repaired, video of tipping Will be made by owner 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40862 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Blodpoi Ri R Ssfx Adroi Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions. Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring. Container mounts: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. 24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1850 mm. 2 chock blocks with holder. Half-shell mudguards with anti-splash flaps according to EC standards. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Axle spacing offset mm (combined transport) up to 44 tons total weight. Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load reduction for easy telescoping. 2 fail-safe coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation. Wheels and Tires 385/65 R22.5, manufacturer's choice. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Additional LED work light at the rear, switched via reversing light. Country of Approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single-line. Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Paintwork Frame DB 7350 Novagrau (dark gray) 10-year warranty against rust-through. Bsdpfx Aji Ri Avjdrjli Support legs, black coated. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 33,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Highest fifth-wheel load on the market (20") Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis, fifth-wheel, container Fine-grained steel welded construction, fifth-wheel plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic extension, 1st stage; rear extension extended, 1st stage: 2 x 20-foot or 1 x 40-foot with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended to 1st stage Rear extension extended, 2nd stage Blsdpfx Aoi Ri E Aedroi 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic section as a telescoping central tube frame with bolt locking mechanism Without rear height adjustment and without foldable center supports; transport of containers without a tunnel is not possible. 2 container guides, including connection plate for electrical, air, and brake connections Plug-in adapter for front locking, for securing containers without a tunnel from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 to. 2-speed support jack, single-side operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, activated by 3 brake applications Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total trailer length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Registration / License Plates Germany Type approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Bljdpfxsi Ri Exs Adrei Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Bljdpfoi Riv Nex Adrji 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) 2 white position lights at the front 2 white/red side marker lights at the rear Bledpfx Adei Ri Eqjroi 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape Bedpfx Adoi Rizuerjli

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Bedpfx Adei Ri Ayjroli Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front Bjdpsi Riwmjfx Adrsli 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2010, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, suspension: air, tire size: 455/05 R19,5, color: blue, Equipment: ABS, tail-lift, KRONE SD MegaLiner Trailer BPW axles with disc brakes Air suspension, raise/lower function Lift axle ABS/EBS 2x7-pole electrical connection 15-pole electrical connection Liftable roof with hand pump Edscha sliding roof Sliding tarpaulin/curtainsider Portal doors Storage box Unladen weight 7,180 kg Permissible total weight 39,000 kg Bledpfxezb Imye Adrei Load compartment dimensions: L 13.62 m, W 2.48 m, H 3.00 m Tires: 445/45 R19.5

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2012, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, suspension: air, tire size: 455/05 R19,5, color: blue, Equipment: ABS, tail-lift, KRONE SD MegaLiner Trailer BPW axles with disc brakes Air suspension, raise/lower function Lift axle ABS/EBS Bljdpfx Aszb Imgsdrji 2x7-pole electrical connector 15-pole electrical connector Liftable roof with hand pump Edscha sliding roof Sliding tarpaulin/curtainsider Portal doors Toolbox Unladen weight 7,180 kg Permissible total weight 39,000 kg Load compartment dimensions: L 13.62 m, W 2.48 m, H 3.00 m Tires: 455/40 R19.5

Condition: used, axle configuration: 3 axles, first registration: 02/2006, total length: 13,710 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,100 mm, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Lift axle - Air suspension Blodpszb Hmfofx Adrsi - Disc brakes = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 7,450 kg Payload: 31,550 kg Gross vehicle weight: 39,000 kg Functional Loading platform height: 125 cm Condition Damages: none Identification Registration number: OV-65-GS

Condition: used, functionality: fully functional, machine/vehicle number: WKESD000000726905 + 906, empty load weight: 5,080 kg, maximum load weight: 34,920 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2016, total length: 12,640 mm, total width: 2,480 mm, tire size: 385/55 R22,5", color: grey, The images are archive photos; the vehicle may still be in use! Krone Box Liner SDC 27 eLTU4 Suitable for various container configurations: 1x45" container, 1x40" container, 2x20" containers, 1x20" container (centrally or rear-mounted), 1x30" container (rear-mounted). Equipment: Height adjustment for tunnel-free containers, 385/55 R22.5" tyres, steel rims, extendable underrun protection, lift axle, 2x7 and 1x15-pin electrical connectors, spare wheel holder (basket version), BPW axles. The images are archive photos; the vehicle may still be in use! Bsdpfjx R Uizsx Adrsli

Condition: used, Year of construction: 2009, 2009 | Blomenröhr 674/11900 | Used Low Bed Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Bodpfx Ajy Ul Upedroli 💰 Buy Now for EUR 14300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 11 inspection points 9 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Technically okay, rust on the axles, planks need to be replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40827 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. ## Fliegl Thermo Semi-Tipper Trailer ### Chassis – Semi-Tipper Light Construction * Lightweight high-strength chassis construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design ### Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid ### Braking System * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * External brake cylinder pressure test connection at EBS module * Raise-and-lower valve integrated * Trailer brake system electronically controlled via truck (no truck-side installation required) * Automatic tipping lowering function with shut-off valve * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via towing vehicle EBS system (truck preparation required, basic tyre equipment only) * Axle load detection via EBS CAN bus signal for display in the driver’s cabin (truck must be pre-equipped; no additional truck installation required) ### Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims ### Electrical System * LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * LED work lights on both sides * 2 additional integrated LED rear work lights ### Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * Hard-chrome plated first stage piston rod * HDK screw coupling, fixed section, NW 48 mm * Without hose connection * Hydraulic operation via truck PTO (power take-off) ### Tipping Body – Thermo Asphalt Body * Steel round-body design in “Stone Master” specification made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Internal ladder access at front wall * Aerodynamic “Greenline” tapered body design * “Membrane” tailgate with hydraulic rear door, large opening upwards, approx. 2,200 mm clearance height * Side walls: 5 mm continuous steel * Floor: 8 mm continuous steel * Fully insulated body (Fliegl Asphalt Profi Thermo system) * Insulation on front, sides, bottom and rear ### Cover System Bedpeyylapofx Adrsli * “Flip Top” sliding tarpaulin system * Automatic rear closing as folding bow system * Tarpaulin moves forward to the front * Electrically driven system * 7-pin front power socket (charging plug), no connecting cable included * No truck-side installation required * Operation via trailer control panel and remote control ### Operating Notes * For transporting salt, lime, and similar aggressive materials, a hydraulic cylinder with hard-chrome plated piston rod is recommended to prevent corrosion and wear * The stated total weight is technically possible; depending on payload distribution, the maximum permissible axle, drawbar, and fifth wheel loads may limit achievable payload * Incorrect load distribution may negatively affect driving stability and trailer tracking behaviour ### Paint Finish * Chassis: DB 7350 Nova Grey * 10-year anti-corrosion warranty against perforation rust * Landing gear: black coated * Tipping body: RAL 1007 daffodil yellow * Sliding tarpaulin: RAL 7038 agate grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802032235, empty load weight: 4,983 kg, maximum load weight: 33,017 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2022, loading space length: 13,990 mm, loading space width: 2,550 mm, loading space height: 1,120 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: light green, Attention: The images are archive images! The vehicle may still be in use! Chassis: Saddle, container Fine-grained steel welded construction, saddle plate with replaceable 2" kingpin and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, rear-flush locking positions, new design for better saddle pressure with 20" rear-flush, rear lighting protected and recessed in the rear Center telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Center telescope, 1st stage, rear extension extended, 1st stage: 1 x 40 ft with gooseneck tunnel Center telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and overloaded towards the rear Center telescope, 2nd stage, front extension extended, 1st stage, rear extension extended, 2nd stage: 1 x 45 ft with long gooseneck tunnel and angled corners, center telescope as an interlocking central frame with pin locking The transport of filled tank containers is not permitted. With height adjustment at the rear, in "hot-dip galvanized" version, and folding center supports for containers without tunnels Front container guide, pluggable Front crossbeam with current Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45" containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without extension equalization 2 support wedges with holder Aluminum side impact protection Steel under-run protection, galvanized Extendable under-run protection for 45 ft containers Splash flaps at the rear over the entire width (not in conjunction with forklift holder) Bledpfx Adsww Iczeroi Half-shell fenders With anti-spray splash flaps according to EC standards Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fastening kit 1 storage box for fire extinguishers up to 6 kg 1 fire extinguisher (ABC powder 6 kg)

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut Bsdpfx Adjwhfiyorjli * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: used, empty load weight: 5,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2018, loading space length: 7,650 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 25 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Colour RAL 6016 turquoise green Disc brakes EBS Payload 33,500 kg Air lift suspension Floor 6 mm + wall 6 mm with steel reinforcement BPW axles Alcoa aluminium rims Lifting and lowering device Electric Schwarzmüller sliding roof Foldable underrun protection 1st and 2nd axle liftable Errors excepted Blsdsxz Efxjpfx Adrsi

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Gooseneck: * MAX810-H neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * Truck hydraulic connection with flow control (20 l/min), * incl. gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 l with MAX trailer couplings; otherwise, the customer must supply the couplings. * For SZM: 6 x 4 or 8 x 4 Loading platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle telescopic loading platform with bolt-tab coupling at the front and a slope of approx. 500 mm x 8° at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. PENDULUM AXLE 2-AXLE FRONT AXLE * All axles hydro-mechanically steered. * MAX810 chassis-PA-X-F-2-17.5-1.50-2.75 bolt-tab coupling at the front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2 * Extendable widening elements by approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM * All axles hydro-mechanically steered. * Hose burst valve on the axle balancing cylinder with automatic RESET function. * Hydraulic cylinder with shut-off valves and quick-release coupling to secure in the raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle balancing. TIRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141. Final coating of the axles * with 2 coats of 2-component paint, solid color in DB7350 Novagrau. * PAINTING Complete steel construction is automatically blasted with a shot-blasting system after welding. * Second blasting process with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * PAINTING Semi-trailer in carmine red (RAL 3002) Including the following accessories * Gantry with winch for spare tire on the front of the gooseneck. * 3.5-inch Kingpin * Steel front panel approx. 400 mm high. * Aluminum side and rear panels that can be attached to the gooseneck, approx. 400 mm high, in anodized design. * Control levers on the gooseneck protected by a folding cover. * Lighting for the controls on the gooseneck with on/off switch. * A 7-pole socket on the left and right rear of the gooseneck for the warning panel. * Load gauge on the gooseneck for axle load determination on the front and rear chassis. Blsdpfx Adszbfuhjroi * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the lowbed with screw couplings. * Access to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 HP) at 3000 rpm Emission level: EU Stage V Max. Hydraulic pressure: 280 bar Max. Flow rate: 21 l/min Mounted on the gooseneck. * Hydraulic oil tank 100 L Frame hot-dip galvanized (± 480 kg) * Hydraulic connecting lines between the power pack and the connector plate on the gooseneck. * Radio remote control: * Operation of the power pack, start/s

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN Bodpfx Ajtulh Iedreli EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Bledpozaz Tkefx Adrei Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated