Used Flat Stanze for sale (4,056)

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Hedoz Ryfwjpfx Ab Uofn Stored in a covered, enclosed warehouse.

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. Hfodpfjz Ryhxox Ab Ujn In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Stored in a covered, enclosed warehouse.

Condition: used, New: No Year of construction: 2021 Dimensions (LxW): 650 x 250 cm Hsdpfxoz S Eh Hj Ab Uofn

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M 09.10.288, product width (max.): 700 mm, product length (min.): 120 mm, input voltage: 400 V, working height: 850 mm, input frequency: 50 Hz, Equipment: documentation/manual, Kallfass Universa 700 – Fully-Automatic Side Sealer + KALLFASS Schrinktunnel COMPAKT650 D Industrial packaging machine for shrink-wrapping larger products such as picture frames, furniture, insulation material and similar goods. Manufactured by Kallfass Verpackungsmaschinen GmbH (Germany), CE certified. Key specs: Max. production speed: up to 65 packs/min Cross seal bar width: 750 mm Max. sealing frame height clearance: 300 mm Min. product length: 120 mm Film: centre-folded or flat, 12–80 micron; reel diameter up to 400 mm, width up to 900 mm Permanently heated seal bar with exchangeable sealing ledge, maintenance-free, PLC temperature control Siemens S7 PLC with colour touchscreen operator interface (multi-language) Hfsdszwld Hspfx Ab Usn Power: 400V, 50Hz, 3-phase, 3.5 kVA Dimensions: approx. 2500 x 1400 x 2100 mm Colour: Kallfass Anthracite Complete with original technical documentation and CE declaration of conformity.

Condition: used, New: No Year of construction: 2010 Hodpfxoz S Ehgs Ab Ujfn

Condition: used, New: No Dimensions (LxW): 650 x 240 cm Dimensions of cargo space: 650 x 240 cm Hjdpfx Ajz S Ei Rjb Uefn

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Hodpfx Abez Ngk Rj Ujfn

Condition: used, Year of construction: 2013, KONGSBERG CUTTERS HAVE SUPERB BUILD QUALITY, COMPREHENSIVE TOOLING, CUTTING ACCURACY AND GREAT SOFTWARE REFURBISHED 2013 KONGSBERG XP24 CUTTER Excellent condition 3200 x 1680mm work area 1Kwatt Router for milling (refurbished new spindle) Hfsdpfx Aoz S Hx Hob Uen Heavy duty tool / large & small crease wheels V Notch tool, high force knife, oscillating knife I cut software / PC New conveyor belt recently fitted 3 Phase extractor, 6kwatt Busch vac pump & silencer

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: Hfedpfxoxdmgve Ab Uen CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, New: No Dimensions (LxBxH): 650 x 230 x 125 cm Hodpsz S Eg Asfx Ab Usfn VAT/margin: VAT qualifying

Condition: good (used), Year of construction: 1980, operating hours: 15,393 h, functionality: fully functional, grinding length: 600 mm, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Hfsdpfoxru H Tox Ab Ujn ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Year of construction: 2007, HPM 12-33-2 two-roll machine, 3300mm wide, 1200mm diameter, steam-heated. Hodpfx Aoz Spu Deb Usfn Width approximately 460cm and length 8 meters.

Condition: used, Year of construction: 2001, 2001 | Volvo FM6229A | Used Flat-bed Truck | 572655 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Hodpfoz Iw R Dex Ab Ujfn 👷‍♂️ Inspected by an independent expert 30 inspection points 22 approved ✅ 8 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition and operation. Gearbox OK. 6x2 towing, full air suspension, Telma, wheelbase 5.25m. Fiault flatbed using power take-off, 8.5 m in length + ramp, 2.53 m in useful width. 2 hydraulic rear stabilizers with independent control. Hydraulic winch without remote control. The rear axle is a lift and steer axle. The steering function is limited or unreliable. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40158 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 360,000 km, power: 309 kW (420.12 HP), first registration: 09/2011, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 04/2027, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Equipment: crane * Navigation system * Auxiliary heater Air conditioning: air conditioner Hydraulic system: tipping hydraulics Safety: ABS * EBS * ESP Hedpfx Absz Svy To Usfn

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Hjdpfjzvfpyox Ab Uefn Type: Compact 600/800 with Heidenhain control We do not have any further technical data.

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Output for 5 mm glass: approx. 16-18 cycles/hour Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos. Hsdszh Uyrjpfx Ab Usfn

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Hjdpsz Aquzefx Ab Uofn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Horizontal punch. Hfodpfez Hfadex Ab Uen 6 metres Gripper feed. Mitre Shearing.

Condition: used, This listing is for a second-hand ‘ModulMounter ApS’ flatbed laminator Item for sale: 1 x ModulMounter ApS with the following features: Hjdpszap Uvsfx Ab Usfn Includes lighting Folds away for space-saving storage Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 2013, operating hours: 13,140 h, functionality: fully functional, Model: BS1100PBD – 1100 mm working width. Maximum material thickness: up to 160 mm. Belt length: approx. 1900 mm. Feed speeds: 4.5 m/min and 9 m/min. Motor: approx. 20 HP (≈15 kW) with automatic star-delta starting. Configuration: single head roller/pad – single roller head arrangement. Frame: robust construction (double frame) for improved material support. Several technical conveniences: electric height adjustment of the worktable with fine micro-regulation, pneumatic braking system for rapid roller stop. Hfjdpfx Abexx T T Se Ujn

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Manufacturer: WEILEDER Model: WTK -40/55 PT Category: Packaging machine Year of manufacture: 2018 Location: Ex site Availability: Short-term Operational condition: Dismantled/in storage Technical Data Passage width: 400 mm Passage height: 200 mm Workpiece length max.: 550 mm Film width max.: 600 mm Number of rollers bottom: 1 Total units: 1 Longitudinal units: 1 Magazine slots: 1 Packaging stations: 1 Conveyor technology: Stepless feed Shrink film: Longitudinal film station Discharge: Automatic version Mobile device closure Sealing units Conformity marking: CE marking Total connected load: 9 kW Space requirement length: 2.57 m Hfjdpsyatgcofx Ab Uon Space requirement width: 0.87 m Space requirement height: 1.6 m

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 15 KW Hfodpozq Ur Tsfx Ab Uen Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2016, total length: 13,900 mm, total width: 2,550 mm, total height: 2,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,010 mm, color: blue, Year of construction: 2016, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Hsdez R Ncgepfx Ab Uofn Weights Empty weight: 6.998 kg Carrying capacity: 32.002 kg GVW: 39.000 kg Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips Hedpoxmhyisfx Ab Uefn - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 6204, grinding length: 1,250 mm, grinding width: 450 mm, grinding height: 450 mm, overall weight: 4,500 kg, disc diameter: 400 mm, - Year of manufacture: 1977 Hsdpfx Absxmf Iqj Uofn - Fully functional, powered, ready for demonstration - Processing dimensions: 1250 x 450 x 450 mm - Grinding wheel diameter: Ø400 mm - Magnetic plate: 1200x400 mm - Power connection: 25.5 kW - Weight: 4,500 kg - Machine no.: 6204 Net price ex-works Luckenwalde (Germany), unloaded, without transport