Used Trailer Work Platform for sale (80,850)

Condition: used, Year of construction: 2008, machine/vehicle number: 51.E164-010-01, Meusburger/IFE MPS-3 semi-trailer including screening machine. Enquiries only via email or Machineseeker, please. Ibjdpfx Afovpfqhsijc

Condition: used, functionality: fully functional, Year of construction: 2001, load capacity: 200 kg, lifting height: 21,000 mm, Trailer-mounted work platform, trailer work platform, telescopic platform, aerial work platform DENKA Type: DL21 Year of manufacture: 2000 Load capacity: 200 kg Platform dimensions approx. 1.0 x 0.7 m Ibedjxkr T Iopfx Afijc Transport dimensions approx. 8.2 x 2.46 x 1.8 m Weight approx. 2500 kg Working height approx. 21.3 m Platform height approx. 19.3 m Outreach approx. 9 m (center of basket/80 kg) Hydraulic drive for maneuvering (can be operated from the basket) Automatic cable reel Outriggers can be operated from the basket TÜV: new inspection will be done UVV: new inspection will be done Extensive overhaul work was carried out on the platform in 2022: - Paintwork renewed - Hoses replaced - New batteries - All oils changed - New inspection logbook issued by the manufacturer - New tires - Brakes overhauled - Vehicle wiring replaced - Overrun device overhauled - Reinforced jockey wheel

Condition: good (used), Year of construction: 2012, Vehicle description Trailer-mounted lift NIFTYLIFT 120 TPET Year: 2012 1,490 kg - 12 m working height - Bi-energy - Petrol engine + battery operation - Telescopic + articulated boom Ijdpfxoxcwtde Afiebc - WHEEL DRIVE! - Immediately ready for use! - CE certificate and other documents included! - On request: inspection report and renewed inspection prior to delivery! Sale price: 15,500,-- net Affordable delivery available!

Condition: new, overall weight: 48,000 kg, maximum load weight: 38,400 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Ibjdpoxl Nf Defx Afioc Landing gear: * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Condition: used, overall weight: 6,500 kg, maximum load weight: 4,930 kg, axle configuration: 2 axles, loading space length: 4,100 mm, loading space width: 1,990 mm, first registration: 03/2022, total width: 2,545 mm, total height: 2,850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 ---Please refer to the pictures for equipment and condition. ---The vehicle is in unprepared (original) condition! Nationwide delivery available at extra cost. Iodpfswtvvnox Afiebc Errors and prior sale reserved. We are happy to accept your vehicle as a trade-in. Financing / leasing also possible without down payment! Do you still have questions? We are happy to advise you!

Condition: used, overall weight: 16,000 kg, maximum load weight: 12,100 kg, axle configuration: 2 axles, loading space length: 7,400 mm, loading space width: 2,500 mm, first registration: 01/2011, next inspection (TÜV): 12/2024, Equipment: ABS, * ABS * Orange rotating beacon * Duomatic air connection * 5-chamber rear lights Isdpfxevy Nw To Afijbc * Front support winch * BPW ECO axles ----Structure: Open platform (loading height approx. 950 mm), hardwood floor, extendable by 1,685 mm at the rear, 4 extendable container locking pairs (Twist Lock), stainless steel storage boxes. Only sold to traders. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, overall weight: 3,500 kg, first registration: 11/1998, suspension: other, color: blue, Year of construction: 1998, mileage: 1,000 km, fuel type: gasoline, gearing type: other, total length: 8,800 mm, driver cabin: other, construction height: 2,600 mm, emission class: none, Equipment: crane, The Albert Böcker trailer crane AHK 27/700 with cable winch HY1010 is a reliable and robust trailer crane suitable for numerous lifting and transport tasks. It dates from 1998 and has only covered 1,000 km to date, which indicates that it has been used gently. The crane comes in a light blue color and has an impressive lifting capacity with a permissible total weight of 3,500 kg. The dimensions of the crane are 8,800 mm in length, 2,200 mm in width and 2,600 mm in height, which allows for a compact yet efficient design. This size makes it particularly suitable for applications that require flexibility and mobility. The condition of this used vehicle is good, making it an attractive option for various commercial applications. Ibsdpfxjvkyklo Afijc The trailer can be delivered within Germany by arrangement for an additional charge. Interested parties can view the crane during the specified times or request further details by phone or email. Sale only to commercial operators (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, overall weight: 48,000 kg, maximum load weight: 37,535 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Ibedpfx Aexgk U Nofiec Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, axle configuration: 3 axles, loading space length: 6,060 mm, loading space width: 2,200 mm, loading space height: 300 mm, first registration: 02/2018, Subject to errors and prior sale! Iedpfx Aevwh U Sjfiobc Internal number: 1448. EQUIPMENT * Platform trailer * 3 axles * Support wheel * AL-KO coupling * Planks all around ... and much more ----The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,080 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add Ijdpfxexf Sifj Afisbc

Condition: new, overall weight: 13,500 kg, maximum load weight: 9,840 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,480 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the specification. Full specification available upon request. Chassis * Steel welded construction consisting of welded longitudinal beams and punched Z-crossmembers * Close-spaced crossmembers for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two insertion pockets beneath the loading floor, each for one loading ramp, with a locking plate integrated into the rear end frame Front support * Support winch with single-side operation Drawbar equipment * Height-adjustable rigid drawbar with bolted towing eye, approx. 40 mm according to DIN * Height adjustment of approx. +/- 150 mm Rear support * Two adjustable drop legs Axle assembly * 2 x 7 t air suspension axle assemblies, brand SAF * Drum brake approx. 300 x 150 mm * Wheel connection: 10-hole hub-centered for single tires * Total air suspension travel approx. 180 mm, with lift approx. 150 mm and lower approx. 30 mm * Control via hand lever with detent function Tires * 4 pieces, 285/70 R 19.5 – manufacturer at our discretion * On steel rims 8.25 x 19.5, manufacturer at our discretion Splash protection * PVC splash guards in front of and behind the axles * In accordance with EC, with rear mud flap Load securing * On the outer frame, lashing rail for ratchet straps approximately every 200 mm, tie-down force approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, tie-down force approx. 8,000 daN * Stake pockets for 80/50 plug-in stakes * 3 pairs of stake pockets evenly distributed in the outer frame * 4 rows of stake pockets across the loading platform, evenly distributed Braking system * Pneumatic braking system according to EC with EBS and one coupling head each (red/yellow) at the connection plate on the drawbar * Connection to towing vehicle via one double helix with 1 coupling head red/yellow and 1 Duomatic coupling * Spring-actuated parking brake acting on one axle Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame * Wheel arch areas with sheet metal covers * Floor load capacity suitable for forklift operation up to approx. 5 t Container locks: * Container locks for 1 x 20 ft. as per ISO 1496, EN 284, or EN 452-1 * Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452 Lighting * Lighting system according to EC, 24 Volt * Multi-chamber rear lights, license plate lights, side marker lights, and lane position lights at the rear * Connector plate on the drawbar including wiring harness with 15-pin and 2 x 7-pin sockets Accessories included * 1 removable rotating warning beacon at the rear with permanent light registration * Additional: with switch, 2 LED reversing lights on the rear lamp carrier, activated via reverse gear * Side and rear welded forklift approach protection * 1 x stainless steel toolbox each left and right behind the axles * 6 x 250 mm side boards (3 per side) and front/rear boards made from anodized aluminum hollow profiles, approx. 600 mm high * Side boards can be foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm) * Side board/stake magazine at the front bulkhead * 1 additional retaining plate including parking sockets for air/electrics/EBS Paintwork * Chassis hot-dip galvanized * Side boards RAL 9010 Pure White * Hubs KTL black * Rear underrun protection RAL 9010 White * Ibedpfx Asxc Axxofioc

Condition: new, overall weight: 48,000 kg, maximum load weight: 38,400 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall Iodpfxew Tpr Is Afijbc * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: new, overall weight: 73,000 kg, maximum load weight: 61,050 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment list available upon request. Loading Platform: * Loading platform with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technically rated at 12,000 kg each * 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169K – manufacturer of our choice TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to process and display this data Brake System: * Wabco brake system as per EU regulations with EBS-E (4S/3M) without connecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations * Lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically blasted after welding using a shot-blasting machine * Second blasting with corundum for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint finish not possible Including the following accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection rail * Storage for approx. 1,000 mm long insertable stanchions in the rear central beam * At the gooseneck and rear plate, left and right, one bracket each for warning signs including socket * Remote steering from front and rear via cable remote control with push-buttons, with single-track monitoring of the axles (no installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stanchion pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading status * 7 pairs of galvanized insertable stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stanchion pocket strips mounted on the loading platform for stanchions approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading platform, for 1x10' Ibsdpfxjw Tpr Us Afiec * 1 shunting coupling with reinforcement bolted to the rear crossmember * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2

Condition: new, overall weight: 45,000 kg, maximum load weight: 36,245 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. The full list of features is available upon request. Loading Platform: * Hardwood loading platform with rear bevel approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended * Disc brakes (approx. 377 mm) * Lift/lower function (ET 120) * Axle tool kit Tyres: * 435/50 R 19.5 tyres – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transfer to the tractor unit occurs via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations * 24V ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: Iodpfjw Tpqqox Afiebc * Complete steel structure blasted automatically with a shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * HRM-metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with 2 coats of 2K finish paint, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holders * 2" kingpin * Loading platform with heavy-duty hardwood floor * 1 spare wheel holder under the loading platform, right-hand side in the direction of travel * Galvanized folding supports under the loading platform's beveled section * 9 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip painted sand layer on the central beam * 1 INOX toolbox transversely mounted under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the floor for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of crosswise stanchion socket strips in the platform for plug-in stanchions approx. 100 x 50 mm * Storage for max. 9 pairs plug-in stanchions, approx. 100 x 50 mm, bolted to inner front wall * 2 INOX toolboxes under the platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the pla

Condition: used, overall weight: 48,000 kg, maximum load weight: 36,300 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2025, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. - Load area in a double-extendable version with pneumatically operated locking mechanism - A fixed intermediate table, approx. 250 mm wide, mounted on the central beam - BPW axles and suspension, all axles hydro-mechanically forced-steered - Air suspension with lift and lower valve - Tyres: 385/65 R 22.5 - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) - Braking system according to EU regulations with EBS-E (2S2M) Ijdpfx Afepkx Eajiebc - Disc brakes - 2-inch kingpin - Electro-hydraulic unit - Remote steering from the front and rear via cable remote control - 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area - Load gauge for axle load determination, including load diagram - A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container locks embedded in the load area, for 1 x 20' container, 2 x 20' containers or 1 x 40' container. An additional locking point is provided in the extension for a 45' container - 5 pairs of crosswise mounted stake pocket strips in the load area - Storage for max. 9 pairs of plug-in stakes approx. 100 x 50 mm, inside on the front wall - One tool box INOX, approx. 1,200 x 460 x 550 mm, mounted at the front under the load area on the left and right - Central lubrication system with 2 BEKAMAX pumps (Pico) - 2 LED reversing lights mounted on the rear panel - Acoustic warning signal when reversing - Collision protection left and right on the rear crossmember - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - HRM metallization (High Resistance Metallisation) - Single-colour paintwork in RAL 3002 carmine red

Condition: used, overall weight: 20,500 kg, maximum load weight: 15,950 kg, axle configuration: 2 axles, loading space width: 2,480 mm, first registration: 10/2018, next inspection (TÜV): 05/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. - SAF axles - Technical axle load: 10,000 kg each - Air suspension with lift and lower valve - Brake system with EBS - Tyres: 265/55 R19.5 - Ramp holder - Mechanically adjustable drawbar for length, 6 x approx. 100 mm Iodjwtv Hmopfx Afijbc - 40 mm towing eye, interchangeable for 50 mm - 3 pairs of stanchion pockets in the outer frame - 4 rows of stanchion pockets crosswise to the loading area - Widenable container locks for 1x20' - Rear extension - Side boards - 4 x stainless steel toolboxes - Single-color paint finish in RAL 3002 carmine red

Condition: new, overall weight: 48,000 kg, maximum load weight: 34,660 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. Loading Platform * Double extendable version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for hooking in tension belts (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Ibodpfxjk Ugace Afisc Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles hydro-mechanically forced steered * Air suspension with lift and lower valve Braking System * According to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Including Accessories * Remote steering from front and rear via cable remote control with push buttons, with single-track control (no installation in tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder mounted on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection strip at the front * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * European reflective signs (red-yellow) on the trailer's rear * One mudflap on the trailer's rear * Manual and instructions on USB stick * Loading platform with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Galvanized supports under the inclined section of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Hook-in rail for ALU access ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads including load chart * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection cover * Spiral cable supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with connector (NATO-NATO) * Coated sand layer on the central beam as anti-slip protection * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, an additional locking point is provided in the extension for a 45' container * 5 pairs of crosswise stake pocket rails mounted in the loading platform, for 100 x 50 mm plug-in stakes * Storage for up to 9 pairs of plug-in stakes, approx. 100x50 mm, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the loading platform left and right in the direction of trav

Condition: used, axle configuration: 3 axles, first registration: 05/2003, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2003, Axle configuration Tyre size: 385/65 R22.5 Axle brand: Anders Brakes: Disc brakes Ibjdpfx Ajxn S U Tjfiec Suspension: Air suspension Rear axle 1: Tyre tread left: 4 mm; right: 7 mm Rear axle 2: Tyre tread left: 6 mm; right: 5 mm Rear axle 3: Tyre tread left: 8 mm; right: 7 mm Weights Unladen weight: 6,300 kg Payload: 31,700 kg Gross vehicle weight: 38,000 kg Condition Damages: none

Condition: excellent (used), axle configuration: 2 axles, wheelbase: 9,400 mm, loading space length: 12,250 mm, loading space width: 2,440 mm, loading space height: 1,400 mm, first registration: 07/2012, suspension: air, color: silver, tire size: 275/70/22.5, Year of construction: 2012, Equipment: ABS, = Additional Options and Equipment = - Air suspension = Further Information = Axle configuration Tire size: 275/70/22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 10,000 kg; Steering Rear axle 2: Dual tires; Max. axle load: 10,000 kg; Steering Dimensions Dimensions (L x W): 1254 x 255 cm Weights Empty weight: 8,610 kg Payload: 29,390 kg Gross vehicle weight: 38,000 kg Condition Technical condition: very good Visual condition: very good Ijdpfx Afjv Sbn Usiebc Identification License plate: OL-50-SR WEB TRAILER 2-AXLE OPEN PLATFORM TRAILER SAF AXLES DISC BRAKES AIR SUSPENSION STEERING AXLE LOADING PLATFORM HEIGHT +/- 135 CM INTERNAL DIMENSIONS L=1225 W=244 ALUMINUM BOARDS 60M REVERSING CAMERA STROBE LIGHT

Condition: good (used), axle configuration: > 3 axles, loading space length: 12,400 mm, loading space width: 2,450 mm, loading space height: 1,530 mm, suspension: air, color: red, tire size: 445/ 65 R22.5 | Load index 169K, Year of construction: 2025, Colour: Red Payload capacity: 71,000 kg Main Features Manufacturer: MAX Type: MAX410 Flatdeck Trailer / MAX410-NZ-5 VIN: YAMT45XX9S0110471 Year of manufacture: 2025 Weights / Load Capacities Kingpin load: 23,000 kg Axle load: 5 x 12,000 kg = 60,000 kg Total axle load: 60,000 kg Gross vehicle weight (GVW): 83,000 kg Unladen weight: approx. 12,000 kg Axles Axle brand: BPW 1st axle is friction steered, 2nd axle fixed, all following axles are hydro-mechanically steered Air suspension with lifting/lowering valve WABCO braking system Tyres: 445/65 R22.5 | Load index 169K Dimensions Length: 12,400 mm Loading platform width: 2,540 mm Height: approx. 1,530 mm Kingpin height: approx. 1,340–1,400 mm Additional Information NATO plug Lashing rings Stake pockets Wheel chocks Wooden loading platform Mechanical landing gear Electro-hydraulic pump for trailer functions Remote cable control Rear bumper with lights Kingpin 2.0” + additional 3.0” Central greasing with 2 BEKAMAX pumps Load capacity: 71,000 kg = Further information = General Information Year of manufacture: 2025 Axle configuration Tyre size: 445/65 R22.5 | Load index 169K Axle brand: BPW Suspension: Air suspension Rear axle 1: Max. axle load: 12 t; steered Rear axle 2: Max. axle load: 12 t Rear axle 3: Max. axle load: 12 t; steered Rear axle 4: Max. axle load: 12 t; steered Rear axle 5: Max. axle load: 12 t; steered Ibsdpsxhf U Hsfx Afiec Dimensions Dimensions (L x W x H): 1240 x 245 x 153 cm Weights Unladen weight: 12,000 kg Payload: 71,000 kg Gross vehicle weight: 83,000 kg Condition Technical condition: good Visual condition: good Financial information Price: On request Further information Please contact Stefan Schaapveld for further information.

Condition: new, axle configuration: 3 axles, Year of construction: 2025, GVN Trailer 3 Axle Exclusive Lowbed    Ibjdpeqxbcnsfx Afisc Please get contact with us for more informaiton;  

Condition: refurbished (used), Year of construction: 2011, operating hours: 4,400 h, machine/vehicle number: PB7142, lifting height: 13,600 mm, overall weight: 1,620 kg, transport length: 4,000 mm, transport width: 900 mm, transport height: 200 mm, construction height: 200 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, operation weight: 1,620 kg, Self-propelled crawler work platform: Platform Basket 13.65 Spider with 200kg basket load, with 2-man basket, track widening/reduction, hybrid, electric and petrol-powered, year of manufacture 2011, only 1620kg operating weight, completely overhauled with approx. 2950 hours. Crawler chassis can be hydraulically narrowed (80cm clearance width, 1.95m height), available at a reasonable price. Black crawler chassis, wide support, loading aid (arm without support can be partially raised to enable easier loading onto the trailer), cable control for the chassis, 2 driving speeds (additional fast gear), 4 hydraulic supports and much more... Ibedpfx Asvmbzdefijc

Condition: excellent (used), axle configuration: 2 axles, wheelbase: 9,450 mm, loading space length: 12,250 mm, loading space width: 2,440 mm, loading space height: 1,400 mm, first registration: 08/2012, suspension: air, color: silver, tire size: 275/70/22.5, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = Ibjdpfev Sbnnjx Afioc - Air suspension = Further Information = Axle configuration Tire size: 275/70/22.5 Axle make: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 10,000 kg; Steering axle Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steering axle Dimensions Dimensions (L x W): 1254 x 255 cm Weights Unladen weight: 8,480 kg Payload: 29,520 kg Gross vehicle weight: 38,000 kg Condition Technical condition: very good Optical condition: very good Identification Registration number: OL-14-SP WEB TRAILER, 2-AXLE, OPEN BODY TRAILER SAF axles Disc brakes Air suspension Steering axle Loading platform height +/- 135 cm Internal dimensions L=1225 W=244 Aluminum sideboards 60 cm Rear-view camera Strobe light

Condition: new, axle configuration: 3 axles, Year of construction: 2025, We have all Europe documents!   Ibodpfx Ajqx Nfgofijc    We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      If you have an interest please contact with us 

Condition: new, Year of construction: 2025, GVN Trailer 4 Axle Exclusive Lowbed        Ibodpfx Ajqxbfmefioc Please get contact with us for more informaiton;