Used Films for sale (1,310)

Condition: excellent (used), Year of construction: 2016, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Bwodpfx Akoy Iykxs Ejl Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 370 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bodpsy Iyd Ssfx Ak Ejwl Bale length x width x height: 750 x 1200 x 750

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber Bwodpfx Aeff Agiek Esl hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Year of construction: 1990, condition: good (used), Make: Fuji Type: automatic packaging machine Bwodofx Sqgspfx Ak Esl Model: FW-3400 Year of construction: 1990 Frame: steel, lacquered Dimensions: L x W x H = 4.500 x 1.100 x 1.600 mm Product width: max 140 mm Product height: max. 60 mm Product length: 80 - 350 mm (range cut length) Capacity: 20 - 300 packages / minute Other: foil width up to 430mm separate mobile transformer cabinet digital display with controls English documentation as-is or adjusted to customer needs

Year of construction: 1997, condition: not inspected (used), Cluster packer / foilwrapper Bjdpfxsia I Ifj Ak Eswl make: Novopack type: CD1 110+SL070 Dimensions 3600x2000x2150mm sealbar first operation 1050mm side sealbar 650mm Infeed conveyor Flexlink 10Kw as-is or adjusted to customer needs

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Bsdpfx Ajigyp Hok Eswl Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Year of construction: 2003, condition: like new (used), Meypack Verpackungssystemtechnik GmbH Type: SW 90M/40-2 Double lane system Output (max): 40 cycles per minute Bwedpsfxyp Rsfx Ak Ejl Y.O.M.: 2003 Film cutting unit: Width is 900 mm Good running condition.

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Bwsdpfx Akswhcfxj Ejl Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: used, Year of construction: 2013, Year of manufacture: 2013 Status: very good Counter status: about 5.6 million Technical specification: - Laminating speed: 25 m/min - Minimum sheet size: 200 × 200 mm - Maximum sheet size: 560 × 800 mm - Paper weight range: 115–600 g/m² - Max. feeder pile height: 520 mm - Film thickness: 24–50 μm - Film types: OPP, PET, Nylon - Heating time (laminating roller): approx. 4 min - Sheet overlap accuracy: ±1 mm - Machine dimensions (incl. table): 263 × 100 × 147 cm - Air supply: min. 6 bar - Max. air consumption: 95 l/min - Max. pressing force: 15 kN - Power consumption: 7 kW - Machine weight: 650 k Configuration: - Suction feeder head - Vacuum pump - Automatic sheet overlap control - Double sheet / misfeed detection - Automatic sheet separation via built-in perforator Bwedpfoy Iwirjx Ak Eol - Anti-curl device (roller + bar) - Sheet separation detector - Separation roller with adjustable speed - Electronically controlled tearing section - Fixed delivery table

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: Bedou Tg Nnspfx Ak Eewl The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Bwodpsu Thpnofx Ak Ejl Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Year of construction: 2002, Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Manufacturer: SMI Model: LSK 45 T Machine type: Shrink wrapping machine (film packer) Year of manufacture: 2002 Capacity: approx. 45 packs per minute Packaging type: Shrink film (with film discharge) Application: Packaging of beverage multipacks Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2x3 x 1.5 L Additional Information Machine was used in beverage production for disposable bottle packaging Designed for flexible multipack configurations Currently stored and available for shipment Bwodpfxjy Hkauo Ak Eol

Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) installed in 2015 short-term available Technical data: PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit technotrans alpha.c dampening system Antistatic blower at the feeder head Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices) Bedpfoxb U Ayex Ak Eowl

Condition: used, Tabletop banding machine (bundling machine) Band/roll width: 30 mm Material: Paper from 70 g/m² or film from 80 µ (duplex film) Sealing: Heat sealing Bwodpfxoxwxdmj Ak Eol Frame size: 240 × 170 mm (WxH) Product size: Min.: 30 × 5 mm / Max.: 235 × 170 mm Output: approx. 26 cycles per minute Tension: infinitely adjustable (from soft to very tight) Power supply: 230 V / 50 Hz Machine dimensions: approx. 425 × 400 × 287 mm (WxHxD) Weight: approx. 28 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 1,200 h, High Precision Advanced Thin Film Piezo (TFP) technology Extreme Dot Placement accuracy for unmatched line detail and photographic print quality One-inch wide print head with 720 nozzles per color Auto-switching dual-black ink technologies - Photo and Matte Black Produces variable-sized droplets as small as 3.5 picoliters to greatly decrease print times while optimizing photographic print quality Maximum resolution of 2880 x 1440 dpi for incredibly sharp text and line art Printing Technology: Epson MicroPiezo® inkjet technology Maximum Print Resolution: Paper: 720 x 720 dpi Film: 1440 x 720 dpi Print Speed: Up to 16' (5m) per minute at 720 x 720 dpi (on paper) Ink Type: SurePress AQ Ink Ink Palette: Cyan, Magenta, Yellow, Black, Green, Orange White Ink Configuration: Epson industrial-quality, water-based, resin-coated pigment ink system (SurePress AQ) Bwsdpoqrq Uysfx Ak Eel Temperature: Operating: 64° to 82°F (18° to 28°C) Humidity: Operating: 35 to 55% (no condensation) Sound Level: 75dB or less (excluding the alarm sound) Dimensions: 13.75' x 6.73' x 6.99' (4,190mm x 2,050mm x 2,130mm) WxDxH Weight: 4960.40lbs (2,250kg) Ink Supply Fill Volume: 700ml Ink Shelf Life: 2 years from printed production date or 6 months after open Power Supply Voltage: Rated +/- 10% (180-220V) Rated Voltage: AC (Three phase system) 200V Rated Frequency: 50-60Hz Rated Current: 30A Input frequency range: Rated +/- 1%

Condition: excellent (used), Automatic pallet wrapper Horseshoe turntable Inventory no. 3842 Manufacturer: Robopac Model: Ecoplat TP Horse * Year of manufacture: 2015 * Design: Horseshoe turntable * Loading with a hand pallet truck * Turntable positioning via fixed stop * Number of bottom and top wraps Bwedey Ittaspfx Ak Eol * Film pre-stretch * Max. wrapping height approx. 2200 mm * Own weight approx. 470 kg * In very good condition

Condition: used, mileage: 375,000 km, power: 120 kW (163.15 HP), gearing type: automatic, first registration: 08/2016, emission class: euro6, color: white, brakes: retarder, number of seats: 19, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 516 low-floor rear German vehicle from a German bus operator. In very good condition for its age and mileage, No rust, design film. Bedpfx Asy Irqkok Eewl Double glazing, 15+1 sleeper seats + 3 folding seats, registered for 19 seats plus 4 standing places, refrigerator, microphone, air suspension. Net export possible. No calls asking for final price.

Year of construction: 2026, operating hours: 2 h, condition: new, functionality: fully functional, SPECIAL PRICE SHOWROOM UNIT: EUR 2,250.00 - - - - - IMPORTANT: delivery time (ex works) approx. 3 weeks Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues. As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also result in longer down time. If the application unit is removed the quick cooling-down will prevent thorough cleaning. Furthermore the lack of a proper fixing device and a drive motor for the glue roller are other disadvantages. Technical Data: - 2-temperature control (2 channels) with easy to read display - Heating target temperature and drive starting temperature can be set individually - Glue roller speed: 60 rpm - 2 straight wheels, 2 turnable wheels with brake - Main supply connection cable: 10 m - Power supply: 380(400) V, 50/60 Hz - Installed power: approx. 2 kW (max) - Dimensions  L x W x H:  60 x 50 x 100 cm - Weight: ca. 60 kg - Painting in light grey RAL 6035 u. traffic blue RAL 5017 Technical documentation with operating instructions, spare parts list and wiring diagram are included in the scope of supply. Bodoy Ipk Ijpfx Ak Eewl

Condition: used, Year of construction: 1999, Format: 370 x 520 mm Equipment: Two colours Straight machine Alcolor Automatic film dampening Bwjdpsyf Iicsfx Ak Eel Autoplate: semi-automatic plate change system Cptronic , Chromed cylinders Blankets wash-up device - Wash device for impressi Ink-rollers wash device managed from console Powder spray, Cooling unit Plusversion All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed plate bender

Condition: used, The Matrix 530 Laminator is a versatile and efficient machine designed for high-quality lamination tasks. This machine is currently in stock and located in Germany. It can handle a maximum sheet width of 550 mm and operates at a maximum speed of 10 meters per minute, ensuring quick and efficient lamination processes. The 530 Laminator supports a maximum film width of 500 mm and is capable of one-sided lamination. It features mechanical, adjustable pressure settings to accommodate various material thicknesses, starting from 135 g/qm2. The machine is compatible with foils that have a core diameter of 76 mm, making it a reliable choice for a wide range of lamination applications. Format: 550 mm Equipment: Max. sheet width: 550 mm Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Bwedpfx Aewc Alnsk Eel Pressure: mechanical, adjustable Material: from 135 g/qm2 Core diameter of foils: 76 mm:

Condition: used, Year of construction: 2013, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Laminating Speed: 15 mtr/min Laminating Film: OPP PET NYLON. Matt & Gloss plus special digital film Paper Thickness: 120-350 gsm Pressure Control: Pneumatic cylinder Heating System Bwedpfxexb Dn Se Ak Ejl Heating System: Hot roller internal infrared heater Temperature Hot roller internal infrared heater Temperature Range 0-140 C Warm up time: 10 min Automatic Feeder Film Core: 76mm Power Requirements: 220-240V 50/60Hz Power Consumption: 2300W 10 5A Weight: 240 kg Dimensions (W*D*H): 860 x 1585 x 595 mm

Year of construction: 2002, condition: ready for operation (used), A thermoforming machine A&D with a cooling unit is available. Lower film width: 185mm, upper film width: 175mm. Documentation available. An on-site inspection is possible. Expected to be available from the beginning of 2027. Bwodpfxjy Igc Us Ak Esl

Year of construction: 2007, operating hours: 24,032 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 23081, NEUE HERBOLD HZR 1300 M KN (VECOPLAN VAZ 1300) / USED SHREDDER Price: 40,000 EUR Year of manufacture: 2007 Serial number: 23081 Operating hours: 24,032 motor hours Condition: Fully operational, ready for use Location: Ukraine Status: Dismantled, machine demonstration possible (connection upon agreement) Description: For sale is an industrial single-shaft shredder Neue Herbold HZR 1300 M KN, designed for processing film, plastics, pallets, and other polymer waste. The machine has been primarily used for film processing (pre-shredding), operated consistently, and maintained regularly. Performance: - Film: up to 1 t/h - Pallets / rigid plastics: 1.5–2 t/h Scope of supply: - Shredder - Horizontal feed ram - Vertical pressure hood - Additional spare stator and rotor knives - 2 additional sets of replacement screens Important: - Conveyor is NOT included - Machine has been dismantled - Test run possible for inspection --- Technical specifications: Model: HZR 1300 M KN Rotor diameter: 370 mm Bodjy Ic Efspfx Ak Eewl Rotor length: 1305 mm Rotor speed: 132 rpm Number of rotor knives: 60 pcs Feed opening size: * Length: 3520 mm * Width: 2590 mm * Height: 2100 mm Weight: 6,500 kg Main drive: 55 kW Voltage: 400 V Hydraulic system: 63 liters oil (Shell Tellus HLP 46) Advantages * Reliable German industrial machine * Long service life * Very low energy consumption * For film shredding, power usage approx. 30 kWh * Hydraulic clutch reduces load and energy costs * Large inventory of consumables and screens * Suitable for film, plastics, pallets * Quick commissioning * Excellent solution for waste processing with minimal investment Additional information: On request, we can provide: * Photos of knives and screens * Technical documentation

Condition: used, mileage: 20,000 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2025, next inspection (TÜV): 04/2028, color: white, number of seats: 9, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Opel Movano 9-seater – also available as Fiat Ducato (multiple units available, including one in grey metallic). The price refers to a vehicle with 20,000 kilometers. We also have vehicles with lower mileage between 5,000 and 20,000 kilometers. - Flexible floor with 6 airline rails - 7 individual seats in the passenger compartment by GRL, rearward adjustable with left and right armrests, magazine nets, and Isofix - Registered wheelchair space - Original driver and front passenger seat for full 9-passenger capacity Labeling and design in adhesive film. Base vehicle features: Air conditioning, parking sensors with rear view camera, radio with hands-free system, multifunction steering wheel, ... H3 Wheelbase: 4,035 mm Overall length: 5,993 mm Height: 2,522 mm Width: 2,050 mm Permissible total weight: 3,500 kg!! Special equipment: Driver/passenger airbag, Cool & Sound package, electrical interface for additional conversions, driver assistance system: parking pilot with rear view camera, Light package 1, tire repair kit, passenger seat in cab individually adjustable, driver’s seat heated Additional features: Exterior mirrors, single tires on 2nd axle/rear axle, crosswind assist, 185 A alternator, rear-wing doors with glazing (opening angle 180 degrees), high roof H2, gross weight 3.5 tons, body/construction: high-roof van, vehicle length variant: L3 (2 available), L4 (one available), high-roof variant (H2), fuel tank: 80 liters, adjustable steering column (steering wheel), headlight range adjustment, model update, engine 2.3 l – 103 kW CDTI, pollen filter, long wheelbase, low emissions according to Euro 6e-TEMP emissions standard, sliding door right (cargo/passenger area), visibility package, steel rims 6.5x16, LED daytime running lights, permitted total weight 3.5t. Net export possible. All information without guarantee. These are German vehicles, no re-imports. Bwjdjy Iavhepfx Ak Eol Custom orders also possible for Citroen/Peugeot/Fiat Ducato or Opel Movano. We make worldwide shipments.

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  Capacity: approx. 20 ppm Formats: 1.5 L – 3×2 2.0 L – 3×2 Application: Shrink packaging of PET bottles Configuration: Shrink packer with sealing bar (film only) Bedpoy Etqmofx Ak Eewl