Used Field Sprayers for sale (2,276)

Condition: good (used), power: 170 kW (231.14 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 8,815 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT00D6TPSGZ00303 Drivetrain AdBlue system: Yes Drive: Track Make of engine: C9.3 Weights Empty weight: 23.299 kg Functional Lsdpfx Afox Nc I Nefeak CE mark: yes Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 100 Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5,471x2,64x3,253 Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Lasdewphixjpfx Affek Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: used, Year of construction: 2011, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 59.735 kg Functional Lifting capacity: 530 kg Working height: 10.200 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 16,5x2,75x3,96 Production country: DE Laedpfx Afjwx Nznofsk Additional information Please contact Christian Theißen for more information Manufacturer: Wumag Model: WT 1000 Year of build: 2011 Condition: Used Data: Max. working height: 102,50 m Max. platform height: 100,50 m Max. reach: 35,80 m Total dimensions LxWxH: 16,50 x 2,75 x 3,96 m Platform dimensions LxW: 3,70* x 0,90 m Max. basket load: 530 kg Swivel range: endless Ground pressure: 420 kN Ground clearance: 0,31 m Support width vertical: 5,55 m Support width one side: 6,80 m Support width both sides: 8,05 m Support length: 8,75 m Own weight: 59.735 kg Special features: Swivel work basket, Basket arm, rotation angle / 115°, Advantages: extremely manoeuvrable due to four steerable axles, automatic support, home function, Chassis data can be retrieved in the basket, Triflex cable for video transmission, complete 2.Steering position at the Rotating tower, *telescopic then 2.30 m, powerlift system and glass vacuum cup.

Condition: used, mileage: 4,212 km, Year of construction: 2023, operating hours: 1,469 h, General information Field of application: Construction Serial number: 52509646 Drivetrain Drive: Wheel Weights Empty weight: 68.820 kg Laedjxp Akbepfx Affsk Functional Lifting capacity: 250.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 80000 Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), lifting height: 16,400 mm, Year of construction: 2019, operating hours: 1,340 h, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Laodpfxsxixfhj Affek Other information Delivery terms: EXW Transport dimensions (LxWxH): 3,3x0,75x1,85 Latest inspection: 2025-01-02 Production country: NL Additional information Please contact Vink Machinery for more information Hoeflon C6 * 2019 * 1340 working hours * Diesel and 230-volt drive * Fully equipped * 16.4-meter working height * 14.4-meter horizontal reach * Pick-and-Carry option * 3150 kg lifting capacity * 2800 kg net weight * Remote control * Documents included

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used load distributor of the manufacturer Dexion for purchase. These can also be used for other manufacturers. The load distributors are designed for a shelf life of 800 mm suitable. Included in the scope of delivery: 01x load distributor, used Ledpsdvad Esfx Affsak Material colour: completely galvanized Total length: approx. 980 mm C-profile dimension: approx. 185 x 35 mm Opening for shelf feet: approx. 115 mm Weight / piece: approx. 10,074 Kg To distribute the field loads over a larger area. Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet (without unloading)

Condition: good (used), Year of construction: 2015, General information Field of application: Construction Serial number: 001 Weights Empty weight: 9.500 kg Lsdpfx Afjx Nc Icofeak Functional Bucket capacity: 8 m³ Condition Technical condition: good Visual appearance: good Other information Fits to following machines: Volvo L350F Rock Bucket / Side Tip Bucket type: Loader bucket Delivery terms: EXW Production country: IT Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Year of construction: 2021, condition: used, New: No Field of application: Construction Serial number: HBOxxxx Please contact ATS Norway for more information Please provide reference number upon request: 18557 Specifications: Laedpfx Ajx I U Uloffek 2021 model Weight: 700 kg S60 attachment Ready for delivery Own weight: 700 Model: SO450 Klype m/ S60 feste

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: Mecalux Technical Specifications for Installation: Number of rack rows: 01 unit Length per rack row: 17,625 mm Number of bays per rack row: 09 units Number of levels plus ground level: 02 units Volume Specifications: Pallet spaces per bay: 06 units Number of pallet spaces per row: 54 units Total number of pallet spaces: 54 units Included in scope of delivery: 10x pallet rack uprights, used Material finish: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted lattice work) 2,000 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box section profile: 100 x 50 mm Clear width: 1,825 mm Laedpovzappjfx Affek Max. load per pair of beams: 2,000 kg with evenly distributed load 72x integrated safety pins, new For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Version: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign with field and compartment load details, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs. Please enquire with us for exact costs, which vary depending on delivery location and scope.

Condition: used, mileage: 775,728 km, Year of construction: 2015, machine/vehicle number: YV3T2U825FA17xxxx, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 20121 Specifications: - 2015 model - 775,728 km - Automatic transmission - 469 hp - 6x2 - Euro 6 engine - Tires (see pictures) - Suspension: full air - Hot water tank - Seating for 13 1 - Sleeping places: 12 Laedpfxswdu Nne Affok - Sofa bed: 2 pcs if desired - New Battery - Converter - New exhaust system - Water tank approx. 200 liters - Large water tank approx. 150 liters - Heat pump - Toilet with vacuum and grinder - 230 v no thanks - Country road - 2 TVs - Sound system - Seating area - Sofa bed - USB socket - Heat pump - Refrigerator - Freeze - Microwave oven - Service history - Air conditioning/ac - Self-exciting fire extinguisher in engine room - Total height of 3.8 m - Ready for delivery Notes from owner: 3 temperature zones in the bus. There is one in the lounge at the back, one in the beds where people want it colder, and one up front by the sea. Mains power only requires 230V, 16 amps, it powers the entire bus when the engine is off Water heater is powered by cooling water on the bus The owner states that it is possible to install seats in the space where the beds currently stand. Description: We have a Volvo 9700 B11R tour bus, which has seating for 13 1 and sleeping for 12 people with a practical sofa bed for sale. The bus has been used to transport artists on tour around Norway and is equipped with everything you can imagine for comfort and functionality. The bus will receive new EU approval before sale, and everything works as it should. It has been well maintained by the owner and is in excellent condition. With an impressive and functional interior, this is a bus with details out of the ordinary. It is immediately ready for delivery. Km: 775728 HK: 469 Technical approved: Yes EU-approved until: 28.11.2026 Own weight: 18500 Total Weight: 24750 Payload: 6175 Width: 255 Length: 1483 Euro: 6 Model: 9700 B11R Turnebuss m/ sitteplasser til 13+1 og sengeplasser til 12 stk + sovesofa . Gearbox: Automatic Number of seats: 13

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Lasdpfxsmxlm Tj Affjk Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 10.100 mm Number of bays / row of shelves: 04 pcs á 2.400 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.400 mm max. load per truss pair 2.400 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Shelf upright: 3,100 mm x 1,100 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14,340 mm Number of bays / rack row: 05 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 06x pallet rack stand, used material color frame: sendz. galvanized Material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 3.100 mm high 1.100 mm deep 20x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 40x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground Ljdpfx Afom Eyk Hsfjak 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf upright: 9,650 mm x 800 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Lajdpsm Eztusfx Affok Length per rack row: approx. 17.180 mm Number of bays / rack row: 06 pcs. á 2.700 mm Number of levels plus floor level: 05 pcs. Included in delivery: 07x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 9.650 mm high 800 mm deep 60x pallet rack truss, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 120x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 235.520 mm Number of bays / shelf row: 79 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 80x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 474x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair Lajdpjm Rghzjfx Affjk 1.600 kg with evenly distributed load 948x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 320x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 160x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Technical Data for Shelving Unit: Shelving System: META Type: CLIP Technical Data for Configuration: Number of Shelf Rows: 01 pcs. Shelf Length: 1,100 mm Number of Bays per Row: 01 pcs. Ledpfsxfkcdox Affeak Number of Shelves per Bay: 06 pcs. Scope of Delivery Includes: 02x Upright Frames, used Color: blue Frame Profile Dimensions: 50 x 40 x 1 mm Adjustment Increments: 25|25 mm including base plates and cross braces The uprights are pre-assembled Height: 2,490 mm Depth: 635 mm 06x Shelves, used Designation: V100 Color: cream white Dimensions: 1,000 x 600 x 40 mm Weight: 4.04 kg each Maximum Load per Shelf: 100 kg (with evenly distributed load) 04x Levelling Plates, used Size: 76 x 58 x 2 mm Weight per piece: 0.064 kg Color/finish: Sendzimir galvanized 24x Shelf Supports, used Weight per piece: approx. 0.014 kg Color/finish: Sendzimir galvanized 02x Cross Braces, used Color/finish: Sendzimir galvanized 01x Load Sign with field and shelf load specifications, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Shipment or delivery beyond pickup can be arranged at additional cost, which must be requested separately depending on delivery location and scope.

Condition: good (used), clear span: 3,600 mm, total length: 18,720 mm, load capacity: 3,300 kg, shelf height: 6,000 mm, Technical data for pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for installation: Number of racking rows: 01 pc. Length per racking row: approx. 18,720 mm Number of bays per row: 05 pcs. á 3,600 mm Number of levels incl. ground level: 03 pcs. Technical data for volume: Pallet spaces per bay: 16 pcs. Pallet spaces per row: 80 pcs. Total pallet spaces: 80 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Weight per pallet (max.): 825 kg Scope of delivery includes: 06x pallet rack uprights, used Material finish: Sendzimir galvanized Type: SR120|20 Profile dimensions: 120 x 75 x 2.00 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted framework) 6,000 mm high 1,100 mm deep 30x pallet rack beams, used Material finish: orange Box profile: 140 x 50 mm Beam type: HS140|15 Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per beam pair: 3,300 kg, with evenly distributed load 60x safety pins, used Material finish: Sendzimir galvanized For securing the beams against unintentional lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 12x shims, used Finish: completely galvanized For leveling rack uprights installed on uneven floors 01x load sign Including field and shelf loads, manufacturer and order number Laedpfx Asw Iqiwoffek Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Additional transport or shipping services for this item are subject to extra charges, which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 01 pcs. Shelf length: approx. 15.100 mm Number of bays / rack row: 04 pcs. á 3.600 mm Number of levels plus floor level: 03 pcs. Technical data on volume: Pallet spaces per bay: 16 pcs. Pallet spaces per row: 64 pcs. Total pallet spaces: 64 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 389 kg Included in delivery are: 05x pallet rack stand, used material color: sendz. galvanized profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( screwed truss ) 4.700 mm high 1.100 mm deep 24x pallet rack truss, used material color: RAL 2004 orange box profile: 120 x 50 mm type of cross beam: PNB 0472 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 1.558 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 10x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Lsdpfsmrn Daex Affjak

Condition: good (used), Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of racking rows: 01 pcs. Shelf length: approx. 183.400 mm Number of bays / rack row: 49 pcs. á 3.600 mm Number of levels plus floor level: 03 pcs. Technical data on volume: Pallet spaces per bay: 16 pcs. Pallet spaces per row: 784 pcs. Total pallet spaces: 784 pcs. used by: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 389 kg Included in delivery: 50x pallet rack uprights, used material color: sendz. galvanized profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( screwed truss ) 4.700 mm high 1.100 mm deep 294x pallet rack truss, used material color: RAL 2004 orange box profile: 120 x 50 mm type of cross beam: PNB 0472 agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 1.558 kg with evenly distributed load 588x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 200x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 100x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Laodpfemrpi Rjx Affek Dimension: 297 x 210 x 2 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Length per rack row: approx. 11.945 mm Number of bays per row: 04 pcs. á 2.880 mm Lodpfx Afei D Em Aofoak Number of levels plus floor level: 04 pcs. Included in delivery: 05x pallet rack uprights, used material color: cream white upright profile: 85 x 50 x 17 x 3.0 mm upright type: C 808 S275 Incl. cross and diagonal braces, base plates The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep 32x pallet rack beams, used material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 64x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: excellent (used), Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 01 pcs. Length per rack row: approx. 19.860 mm Number of bays per row: 07 pcs. á 2.700 mm Number of levels plus floor level: 02pcs. Technical data on volume: Pallet spaces per bay: 09pcs. Number of pallet spaces per rack row: 63 pcs. Total number of pallet spaces: 63 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 08x pallet rack stand, used material color: blue upright profile dim.: P 120 mm o. P 100 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( screwed truss ) 2.000 mm high 1.100 mm deep 28x pallet rack truss, new Material color: RAL 2001 orange type of truss: 2C-S 1115 box profile: 110 x 50 mm clear width: 2.700 mm weight / pcs.: approx. 15,100 kg max. load per truss pair 3,000 kg with evenly distributed load 56x integrated safety pin, new To secure the longitudinal beams against unintentional lifting out 32x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 16x shims, new execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm Laedpfx Afsh Dzcxefek General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be considered Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Shelf upright: 4,700 mm x 1,100 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 17.180 mm Number of bays / rack row: 06 pcs. á 2.700 mm Number of levels plus floor level: 03 pcs. Technical data on volume: Pallet spaces per bay: 12 pcs. Pallet spaces per row: 72 pcs. Total pallet spaces: 72 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 07x pallet rack stand, used material color frame: sendz. galvanized Material color framework: blue profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 4.700 mm high 1.100 mm deep 36x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 72x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground Laodpfxom Eytvo Affek 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf upright: 4,700 mm x 800 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11.500 mm Number of bays / rack row: 04 pcs. á 2.700 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 4.700 mm high 800 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load Lsdom Eztiepfx Affoak 48x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 10x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 12.020 mm Number of bays / row of shelves: 04 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 05x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 24x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 48x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out Lodpfxom Nchke Affsak 20x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 10x shims, used execution: complete galvanized for levelling of the racks which are placed are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.980 mm Number of bays / shelf row: 06 pcs á 2.880 mm Number of levels plus floor level: 03 pcs. Included in delivery: 07x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 36x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.880 mm max. load per truss pair 1.600 kg with evenly distributed load 72x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 14x shims, used execution: complete galvanized for levelling of the racks which are placed Lodpfjm Rghtex Affsak are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 01 pcs. Length per rack row: approx. 30.660 mm Number of bays / shelf row: 11 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 99 pcs. Total pallet spaces: 99 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 12x pallet rack uprights, used Material color: blue type of upright: M-80-P upright profile dim.: P 80 x 69 x 1,80 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 2.800 mm high Lasdjih R Nwepfx Affok 1.100 mm deep 44x pallet rack beams, new Material color: RAL 2001 orange box profile: 110 x 50 mm cross beam type: 2C-S 1115 clear width: 2.700 mm max. load per truss pair 3.000 kg, with evenly distributed load 88x integrated safety pin, new material color: orange For securing the longitudinal beams against unintentional lifting out 48x heavy duty dowel, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 24x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 80 x 220 mm Remark: Pictorial materials are for illustration purposes only. The quantities shown may differ from the scope of delivery. General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)