Used Field Sprayers for sale (1,871)

Condition: used, Year of construction: 2007, Field of application: Freight transport General condition: average Technical condition: average Visual appearance: average Transport dimensions (LxWxH): 6,058x2,438x2,8 Please contact Christian Theißen for more information Manufacturer: Unknown Model: Sanitary container Year of build: 2007 Condition: Used Data: Dimensions LxWxH: 6058x2438x2800 mm inside height: 2500 mm Modular construction: Container steel construction class EXC2 Information: used, damaged, dents on the exterior walls Transport Points in accordance with ISO Standard: in the corners stackable: 3-fold Roof: with layer structure Galvanized sheet steel: 0,55 mm Drainage of rainwater: via surrounding gutters in the frame, with downpipes in the corner posts Load-bearing capacity of the roof: 100 kg / m² Walls: replaceable panels with layered structure Floor: with layer structure Floor finish: 2 mm grey PVC flooring, welded at the joints and white PVC skirting board Floor load capcity: 200 kg / m² Dimensions: 900x2.000mm Windows: white PVC windows Electrical installation: electrical flush-mounted installation (concealed) Powerinstallation: 230V sockets Lighting (2x16W): Lamps Information: Used, damaged, dents on the outer walls. Location: 58840 Plettenberg Njdpeyxf Drofx Ahvjwd immediately available

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Nsdevvkfdepfx Ahvowd

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Nodpfx Ahjvvi Nbevewd Storage location: Nattheim

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Nsdpfxevvi Spo Ahvewd Storage location: Nattheim

Condition: good (used), Year of construction: 2021, Field of application: Freight transport Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 6,058x2,438x2,8 Please contact Christian Theißen for more information Manufacturer: Unknown Model: Sanitary container Year of build: 2021 Condition: Used Data: Dimensions LxWxH: 6058x2438x2800 mm inside height: 2500 mm Modular construction: Container steel construction class EXC2 Information: used, damaged, dents on the exterior walls Transport Points in accordance with ISO Standard: in the corners stackable: 3-fold Roof: with layer structure Galvanized sheet steel: 0,55 mm Drainage of rainwater: via surrounding gutters in the frame, with downpipes in the corner posts Load-bearing capacity of the roof: 100 kg / m² Walls: replaceable panels with layered structure Floor: with layer structure Floor finish: 2 mm grey PVC flooring, welded at the joints and white PVC skirting board Floor load capcity: 200 kg / m² Dimensions: 900x2.000mm Windows: white PVC windows Electrical installation: electrical flush-mounted installation (concealed) Powerinstallation: 230V sockets Nwedpeyxdzcefx Ahvod Lighting (2x16W): Lamps Information: Used, damaged, dents on the outer walls. Location: 58840 Plettenberg available immediately

Year of construction: 2006, condition: good (used), Make: WFL Austria Type: M 100 / 5000 Control: Siemen 840C Year: 2006 MillTurn M100: Complete & Complex machining Turning & Milling Equipped: ATC 108 double chain for milling tool holders ATC 10 positions boring bar holders up to 1000 mm SCHUNK 3 chuck THW 630 - 160R SMW Steady rest SLU-Z-5 50 - 310 mm Field off application: Aerospace Oil and Gas Energy Engineering Crankshaft Hydraulic and Pneumtaics Specifications Metric US Standard Max. turning Ø 910 mm X-Axis 900 (+850 to -40) mm Y-Axis 500 (+300 to -200) mm Z-Axis 5370 mm B Axis 200 ° Spindle bore 165 mm Speedrange Nodpjkvndtofx Ahvowd 1600 Rpm Spindle power 60 kW ATC / revolver 108 B-Axis Toolsystem Capto C8 B-Axis Speedranges 4000 Rpm B-Axis power 25 kW Chip conveyor Yes Pinole taper 6 Mk Stroke pinole 200 mm Quill Ø 180 mm Dimensions (Estimate) Length 14500 mm Width 4500 mm Height 3800 mm Weight 40000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile Nwjdpfx Aeyxccrjhved - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, laser power: 20 W, laser wavelength: 1,064 nm, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives Njdpfx Aheu Smcbevewd - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: used, Year of construction: 2023, operating hours: 881 h, machine/vehicle number: ESF407088, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Nodjyxam Iopfx Ahvswd Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2022, Field of application: Construction Empty weight: 3.074 kg Nedpfxjywrgdj Ahvswd Make of engine: Caterpiller Technical condition: good Visual appearance: good Serial number: KS800132 & 133 Delivery terms: EXW Working pressure: 18000 bar Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information NOTE: We have 2 x H180GC hammers available for sale in our stock at present.

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Njdeq Abnnspfx Ahvswd Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Table has 1 vacuum field Table working range X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AM00002846 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Nwedpfx Ahewwa Hlsved - - Number of controlled axes [pcs.]: 3 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Tool changer positions [pcs.]: 8 - System/software: - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Table length [mm]: 2486 - Table width [mm]: 1255 - Working range X [mm]: 2486 - Working range Y [mm]: 1255 - Z-axis working range [mm]: 150 - X-axis maximum stroke [mm]: 1320 - Y-axis maximum stroke [mm]: 1685 - Z-axis maximum stroke [mm]: 250 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Weiss Nwsdoyw Nnfspfx Ahvjd Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Noise Level: - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Nodpfevu E Nuox Ahvswd Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm Nwodpjh Hp Hyofx Ahvod - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Nwsdpfx Ahetvz Rfsved Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, color: orange, Year of construction: 2019, operating hours: 2,619 h, Field of application: Mining Nwjdpfx Aoywu Iwshvjd Make of engine: Kubota

Condition: used, Year of construction: 2018, Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Nwjdpfoycwupsx Ahvsd Speed XY, vector 35 m/min Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA10000992 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 6000 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 15 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 12 - Type milling table: Beam table - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Table length [mm]: 5020 - Table width [mm]: 1380 - Working range Y [mm]: 1300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2020, Measuring head: LM -1100 Image sensor: B/W CMOS, 1", 20 megapixels Display: 10.4" LCD monitor (XGA: 1024x768) Njdpsywk Nqjfx Ahvjwd Measuring mode with wide field of view: 225 x 125 mm High-precision measuring mode: 206 x 106 mm For further data, please refer to the PDF file!

Condition: good (used), Technical data for the pallet rack system: Rack system: SSI Schäfer Type: K Technical data for installation: Number of rack rows: 01 unit Length per rack row: 15,520 mm Number of bays per rack row: 05 units Number of levels plus ground level: 03 units Technical data for volume: Pallet positions per bay: 12 units Number of pallet positions per row: 60 units Total number of pallet positions: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: 700 kg Scope of delivery: 06x pallet rack uprights, used Material color: Sendzimir galvanized Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, upright protectors and base plates The uprights are pre-assembled (bolted lattice construction) Nwjdeywi Ncjpfx Ahvod Height: 5,800 mm Depth: 1,100 mm 30x pallet rack beams, used Material color: orange Box section: 110 x 50 mm Clear span: 2,995 mm Connector: 2 HK (hooks) Max. load per pair of beams: 2,100 kg, with uniformly distributed load 60x safety pins, used Material color: Sendzimir galvanized For securing the horizontal beams against unintentional lifting 24x wedge anchors, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x shims, used Design: fully galvanized For leveling uprights set up on uneven ground 01x load plate with field and bay load specifications, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: used, lifting height: 5,020 mm, Year of construction: 2019, operating hours: 8,240 h, Year of manufacture: 2019 Field of application: Construction Nwjdpfx Asxg I Rbjhvod Empty weight: 8.300 kg Dimensions (LxBxH): 583 x 230 x 271 cm

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) Nodpfx Asxuvk Eehvewd - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Nwedpjywg Sbefx Ahved - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Field of view on the objective at 50 x: 11.2 x 9.2 mm Field of view on the objective at 100 x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective stage size: 230 x 165 mm Nedpfxob Nxl Ie Ahvswd diameter of the glass table: 80 mm Weight approx.: 230 kg Space requirement: 1030 x 780 x 1800 mm

Year of construction: 1973, condition: used, machine/vehicle number: 8530, screen size: 500 x 500 mm visual field: 100 mm Ø dimensions: 620 x 1020 x 1650 mm Nedpo T Apyofx Ahvowd weight: approx. 250 kg