Used Field Sprayers for sale (1,871)

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm Pgjdpfjyv Iqvjx Ahvoi 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, mileage: 149,995 km, power: 120 kW (163.15 HP), first registration: 06/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 2,700 mm, loading space width: 2,030 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: * Body/Configuration: Flatbed with double cab * Air conditioning * Comfort driver's seat with lumbar support * Double passenger seat * 4-person bench in the double cab area * Flatbed with aluminum drop sides * Ladder rack behind the cab * Storage compartments left and right Pgjdpfxsx Ru I Dj Ahvji * Rear wall with window Technology: * MB audio system radio with USB * Bluetooth hands-free system * Electrically adjustable and heated exterior mirrors * Outside temperature display Safety/Environment: * Mercedes-Benz emergency call system * Driver and passenger airbags * Traction control system (ASR) * Suspension: Stabilization Level II * Driver assistance system: Crosswind Assist * Low emissions according to Euro 6 standard Other: * First delivery in Germany * 1 previous owner * Truck registration * Engine: 2.1 L – 120 kW CDI CAT * Wheelbase: 3665 mm * Gross vehicle weight: 3.5 t * COC document available Retrofitting of a tow bar up to 3,500 kg is possible at extra cost. Since 1972, your reliable partner for vehicles and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks approx. 200 vehicles from the fields of vans, commercial vehicles, and construction machines! We continuously offer attractive financing options with special rates. If interested, we will be happy to prepare an individual offer for you! We welcome the trade-in of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide you with a quote from our partner workshops. Our offers generally do NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners at extra cost. The information provided in advertisements, on the Internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. Errors and prior sale reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Podpfeq H Shcex Ahvjgi Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry Pgedjq Igyvspfx Ahvsi - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, mileage: 6 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2025, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Renault Master NEW MODEL 170 HP Euro 6 STX 5-seater ex. Long 1-2 Horse Transporter HARAS - Stallion Equipment Vehicle: . 170 HP Renault Master chassis EURO 6E leather interior * Air conditioning * 5 seats * Radio-CD-navigation * Bluetooth hands-free system * Towbar * Cruise control * Multifunction steering wheel Horse compartment: * Soft rubber floor * COMPLETE STALLION EQUIPMENT with high partition, separate doors for each horse * Partition fully adjustable, e.g., for mare + foal * Roof fan * Roof hatch * LED day-night light * Enclosed storage boxes in alcove * Saddle and bridle holder * Tack room with storage compartments Available as additional equipment: * Camera system, rear view and horse monitoring camera €1,500 * Automatic * Alloy wheels €1,250 * Additional coil springs * Winter tires * Shelving system in tack room Errors/input mistakes & prior sale reserved. Further pictures on request. * EXPORT NET SALE POSSIBLE Pgedpfx Ahjyxb D Ijvoi * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sale and service of all brands in the field of horse trucks and trailers. Please make an appointment in advance. with Richard Theurer Andreas Theurer

Condition: new, mileage: 6 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 4,100 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Mercedes Sprinter STX NEW MODEL 190 HP Euro 6 STX 3-seater 1-2 Horse Transporter HARAS - Stallion Equipment GVW: 4,100 kg Vehicle: * 190 HP chassis EURO 6E * Leather interior * Air conditioning * 3 seats with seat heating * Radio-CD navigation * Bluetooth hands-free system * Tow bar * Cruise control * Multifunction steering wheel Horse compartment: * Soft rubber flooring * COMPLETE STALLION EQUIPMENT with high partition wall, separate doors in front of each horse * Fully adjustable partition, e.g. for mare & foal * Roof fan * Roof hatch * LED day/night lighting * Enclosed storage compartments above cab * Saddle and bridle holders * Tack room with storage compartments * Camera system, reversing and horse surveillance cameras * Automatic transmission * Alloy wheels Available as optional equipment: * Winter tires * Shelf system in the tack room Errors/input mistakes & prior sale reserved. More pictures available on request. * EXPORT NET SALES POSSIBLE * Attractive leasing offers Location and inspection of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Pgjdpeyxb Efsfx Ahvsi Please schedule an appointment in advance. Contact: Richard Theurer / Andreas Theurer

Condition: new, mileage: 6 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2025, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Renault Master AKX NEW MODEL 170 HP Euro 6 STX 5-Seater Extra Long 1-2 Horse Transporter HARAS - Stallion Equipment Vehicle: - 170 HP Renault Master chassis, EURO 6E, leather trim - Air conditioning - 5 seats - Radio-CD navigation system - Bluetooth hands-free system - Tow bar - Cruise control - Multifunction steering wheel Horse compartment: - Soft rubber flooring - COMPLETE STALLION EQUIPMENT with high partition wall, separate doors in front of each horse - Fully adjustable partition wall, e.g., for mare and foal - Roof fan - Roof hatch - LED day/night lighting - Enclosed storage boxes in the alcove Pedpjyxb Exefx Ahvsgi - Saddle and bridle holders - Tack room with storage compartments Available as optional equipment: - Camera system, reversing and horse monitoring camera €1,500 - Automatic transmission €3,400 - Alloy wheels €1,250 - Additional coil springs - Winter tires - Shelving system in tack room €150 per shelf Subject to errors/omissions and prior sale. Further images available on request. - EXPORT NET SALE POSSIBLE - Attractive leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Please schedule an appointment in advance with Richard Theurer or Andreas Theurer.

Condition: new, mileage: 6 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Renault Master 170 HP Euro 6D STX 3-Seater NEW MODEL 1-2 Horse Transporter HARAS - Stallion Equipment Automatic ///available immediately/// Vehicle: * 170 HP Renault Master chassis EURO 6 * Leather interior * Heated seats * Air conditioning * 3 seats * Radio-CD-navigation * Bluetooth hands-free system * Tow bar * Cruise control * Multifunction steering wheel Horse compartment: * Soft rubber flooring * COMPLETE STALLION EQUIPMENT with high partition wall, separate doors in front of each horse * Fully adjustable partition for e.g. mare + foal * Roof-mounted fan * Roof hatch * LED day-night lighting * Enclosed storage boxes in the alcove * Saddle and bridle holders * Tack room with storage compartments * 4 shelf tiers on the left Available as optional equipment: * Camera system, rear-view and horse monitoring camera €1,500 * Alloy wheels €1,250 * Additional coil springs * Winter tyres €800 * Shelving system in tack room Errors/mistakes & prior sale reserved. Further photos available on request. * EXPORT SALES POSSIBLE NET OF VAT * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 Pedpfsyxb Erjx Ahvsgi 23816 Leezen Sales and service for all makes in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer, Axel Fröhle

Condition: new, Year of construction: 2025, machine/vehicle number: 41383656, fuel type: diesel, motor manufacturer: Cummins KTA50-GS8, General information Field of application: Construction Pgedpfx Ajyxah Ejhvoi Weights Empty weight: 17.500 kg Functional Generator capacity: 1.675 kVA CE mark: yes Other information Fuel consumption: 253 Liter per Hour at 75% Load Generator: Stamford PI734C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 6,058x2,438x2,896 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 41368968, fuel type: diesel, motor manufacturer: Cummins KTA50-G3, General information Field of application: Construction Weights Empty weight: 17.260 kg Functional Generator capacity: 1.375 kVA CE mark: yes Other information Fuel consumption: 199 Liter per Hour at 75% Load Generator: Stamford S6L1D-H41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1640 l Transport dimensions (LxWxH): 6,06x2,44x2,59 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Pgodpfx Ahsyxahrjvji = Remarks = Control to client's specification. Control panel in pictures can differ from stock unit. Stock is DSE 8620 MK2

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins KTA38-G5, General information Field of application: Construction Weights Empty weight: 8.250 kg Functional Generator capacity: 1.100 kVA CE mark: yes Other information Pedpfoyxahfjx Ahvsgi Fuel consumption: 137 Liter / Hour at 75% Load Generator: Stamford HCI634J Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 4,5x2,01x2,35 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel

Condition: new, Year of construction: 2026, machine/vehicle number: DPX-18514, fuel type: diesel, motor manufacturer: Cummins QSL9-G7, General information Field of application: Construction Weights Empty weight: 3.177 kg Functional Generator capacity: 275 kVA CE mark: yes Other information Fuel consumption: 50 Liter per Hour at 75% Load Generator: Stamford UCD274K Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 995 l Transport dimensions (LxWxH): 4,015x1,4x2,495 Production country: PT Additional information Please contact Ronald van der Laar, Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information = Additional options and accessories = - Battery Pedpfx Ahjyxag Ievogi - Control Panel - Steel canopy - Tank = Remarks = Incl. Coolant Heater and Battery Charger

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Psdpfx Aheyvt Exevogi Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Psdoxwaz Hjpfx Ahvsgi

Year of construction: 2022, condition: used, Field of application: Freight transport Lifting capacity: 2 kg Number of owners: 1 General condition: very good Technical condition: very good Visual appearance: very good Hydraulic outreach: 1800 cm Pedsyvqvnspfx Ahvegi Production country: DE Please contact Michael Overmeer for more information Böcker Junior HD18 Furniture lift construction year 2022 from the first owner with only 15 hours. Lift is like new and weights 750 kg so you can drive it with your normal driver license (Categorie B). Options: toolbox, retractable drawbar, retractable wheel axles for narrow passages, aluminium rotation basket. Changes and writing and typing errors reserved.

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Podpfx Aex H Nliehvjgi Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2005, Straight Machine PQC-U: Print Quality Control Unit KPC: Semi Autmatic Plate Change Chromed Impression Cylinder Chromed Plate Cylinder Powder Sprayer Automatic Blanket Washing Device Automatic Ink Roller Washing Device Plate Cylinder Cocking Impression Account: 45 Mio. Pgsdpfx Aoyvlg Iohvei

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: M-G1035, input voltage: 230 V, total width: 610 mm, total length: 1,290 mm, total height: 1,750 mm, overall weight: 600 kg, VIO 20|50 linear M-G1035: Microset tool presetter for drilling, milling, and turning tools Adjustment range Ø 420 mm, measuring length 500 mm (travel in X-axis up to 50 mm beyond spindle center possible) Fully equipped with: - Microvision VIO image processing system featuring: PC technology, 24" 10-point multi-touch monitor - Mega-pixel camera with telecentric lens and blue telecentric illumination - Field of view approx. 5.2 x 5.2 mm, full-image display - Display accuracy 0.001 mm, repeatability +/- 0.002 mm - Cutting edge quality control via live image display (edge inspection) - Measurement with fixed and floating crosshair - Intuitive user interface for shortest measuring cycles - Clear, user-friendly screen displays for highly ergonomic operation and workplace safety - Tool lists, job-related for potential data handover to the machine tool - Tool memory with image allocation as well as assignment of parameter and technology data - Password protection for multiple operators (user management) - Extensive functions for data backup and maintenance - Absolute, differential, and chain dimension display, radius/diameter switching - Interfaces: Ethernet, USB and RS232 - Linear drives in X and Z axis for maximum dynamics and positioning accuracy - Collision protection during motorized movements (minimum speed 180 mm/s) - Fast autofocus - Motorized spindle, 36 rpm - Precision via motorized fine positioning - Manual operation with CNC mode for X and Z axes (optimal operating comfort for positioning) - Heidenhain glass scales in X and Z axis - Rigid grey cast iron construction with torsion-resistant machine bed - Edge finder for quick alignment to tool cutting edges - Sturdy metal base cabinet, compressed air maintenance unit, calibration master - Power supply: 100 V - 115 V and 230 V - Power consumption: max. 1400 VA - Pressure: min. 6 bar - Air consumption: max. 10 liters per hour (depending on configuration and working cycles) Weight: up to 600 kg, dimensions without arm (W/D/H): approx. 610/1290/1750 mm M-A2063: Technology package VIO linear Control electronics PC system and 27" monitor Pjdjyw Sfyepfx Ahvogi 44x magnification of tool display 27" 10-point multi-touch monitor HD display resolution 1366 x 768 (16:9) ITX PC system, keyboard and mouse Machine feet with vibration damping Photo capture of tools with external camera via Microvision HQRID scanner QR code scanner for identification of tool holders / complete tools using a unique label, enabling measurement program selection. M-S1029: ISS - U universal ultra-precision spindle "autofocus" Motorized autofocus for precise tool focusing Runout accuracy at spindle: 0.002 mm Pneumatic, mechanical universal tool clamping ISS Up to 20 kN clamping force Mechanical adapter locking Pneumatic spindle brake 4 x 90°, 3 x 120° motorized indexing Automatic positioning to index positions Operator-independent tool clamping High adapter change accuracy Automatic adapter recognition At least one adapter is required for operation. Please select suitable ISS adapters. M-Y0200: Operating system Windows 10

Condition: used, functionality: fully functional, measuring range X-axis: 510 mm, measuring range Y-axis: 410 mm, total height: 2,150 mm, total width: 1,100 mm, total length: 980 mm, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 340 mm, overall weight: 1,000 kg, input voltage: 400 V, table width: 650 mm, table length: 890 mm, DEA SWIFT coordinate measuring machine (CMM) in used, fully functional condition. Robust bridge-type coordinate measuring machine with granite measuring plate, ideal for precise 3D measuring tasks in industry and quality assurance. The machine offers a measuring range of approximately 510 x 410 x 340 mm (X/Y/Z) and is equipped with a touch probe system. Measuring accuracy is approximately 2.5–3.5 µm, enabling high-precision measurement of workpieces and components. Pgedpfx Aoyw R U Tjhvei The stable granite measuring plate (approx. 890 x 650 mm) and bridge construction ensure high rigidity and repeatability. The air-bearing guides provide smooth and precise movement. Machine dimensions: approx. 980 x 1100 x 2150 mm Machine weight: approx. 1000 kg Fields of application: • Quality assurance • Toolmaking • Mechanical engineering • Metalworking The machine is immediately ready for operation and ideally suited for precise measuring tasks in industrial applications. Inspection possible by appointment.

Condition: new, Year of construction: 2026, Fabo 30-ton horizontal semi-mobile silos are modern storage solutions designed to provide maximum efficiency and flexibility on construction sites. They enable the safe, organized, and practical storage of cement and similar bulk materials, especially in concrete plants and infrastructure projects. Thanks to their horizontal and semi-mobile structure, these silos offer easy portability, reducing the need for fixed installations and saving significant time during installation and dismantling processes. Their robust steel construction guarantees long-lasting use and high durability in challenging field conditions. With a capacity of 30 tons, Fabo horizontal silos are ideal for medium and large-scale projects, working integrated with precise dosing systems to support production continuity. Their user-friendly design simplifies maintenance and cleaning, while their safety-focused details minimize operational risks. Manufactured with Fabo quality, 30-ton horizontal semi-mobile silos combine mobility, durability, and high performance, offering a reliable solution on construction sites. Pgsdpfx Aox Rqm Ajhvji In horizontal cement silos, WAM or ÖZBEKOĞLU products are used for screw conveyors, silo top filters, air jets, vibromotors, pressure sensors, and level sensors.

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Podsyw I Rxopfx Ahvogi Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AM00222090802-01-03, - Function: Heat sealing of blister boxes - Main material of the machine: Stainless steel 304, aluminum alloy - Dimension: 1000mm x 715mm x 450mm - Weight: About 150 kg (excluding mould) - Power supply: 220 V 50 / 60 Hz single phase 3,5 KW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packing depth: Deepest 100mm - Production speed: Up to 12 cycles per minute depending on operator skill - Heat seal pressure: 300-1500kg adjustable Pedpfepfcy Ejx Ahvjgi Autovak is an international company with research, development and manufacturing facilities in Suzhou, China, and sales and service offices in the United States, Germany and Malaysia. The company has over 20 years of experience in the packaging of medical devices. From doing OEM for European packaging machine manufacturers to produce self-designed machinery and equipment with independent intellectual property rights and own brands, Autovak has accumulated a lot of know-how in the field of medical device packaging and online printing.

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment * Psdpfxsvmzihs Ahvsgi

Condition: good (used), Year of construction: 2011, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 1.345 kg Functional Mast: articulated arm Lifting capacity: 200 kg Lift height: 1.020 cm Working height: 1.220 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Psdpfeyw E N Ejx Ahvogi TÜV Marked: yes Remanufactured: Yes Max. horizontal reach: 610 m Transport dimensions (LxWxH): (L/B/H): 4,50 m / 1,50 m / 1,90 m Additional information Please contact Tobias Mayr for more information

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Rehlko KDI3404TM, General information Field of application: Construction Weights Empty weight: 953 kg Psdpfsyw E E Tex Ahvogi Functional Generator capacity: 66 kVA CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Rehlko KH00811T Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 100 l Transport dimensions (LxWxH): 2,1x0,938x1,285 Production country: FR Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. See data sheets for the exact information. Kohler and SDMO are rebranded to REHLKO. Approved for HVO use