Used Saeilo for sale (14)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Dodpfxezl D Ruj Aiijkw Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Dsdpfx Aisx N E Aceiokw Includes documentation.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a center distance of 2,000 mm, it is designed for longer shafts that are machined individually or in small batches. It can be operated manually or programmed for cycle operation. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Center distance / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools - Setup tools - Operating manual Contur Dialog H 56/66/66G CONDITION During our inspection on 01.10.2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, spindles, and tube parts up to 2 m in length in the tool and maintenance sector, where many individual parts are required. Dodpfx Aoz H Ugaeiiskw LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Saeilo Dialog H 66 Control: Siemens 840DSL with ShopTurn Swing diameter over bed: 600 mm Centre distance: 2,000 mm Turning length: 1,980 mm Gear stages: 2 Spindle bore: 105 mm Spindle speed: 2,500 rpm Power: 18.5 kW Dkodpfey D I Hmex Aiisw

Condition: good (used), Year of construction: 2014, 1 used 1 CNC turning machine Manufacturer: Saeilo Contour Model: ACE-15MC Type: LT-2XL500M Year of manufacture: 2014 with Sinumerik 828D BASIC T control system Technical data: Max. turning diameter: 270 mm Max. turning length: 425 mm Bar diameter: 51 mm Spindle speed: 5000 rpm Number of tool positions: 12 Djdpfx Aiovzkw Rjiokw Tool holder: VDI 30 Main drive power: 12/18 kW Travel distances X/Z axis: 183/500 mm Dimensions L x W x H without chip conveyor: 2600 x 2100 x 1800 mm Machine weight (net): approx. 4000 kg Equipment: Powered tools C axis

Condition: good (used), Year of construction: 2018, Distance between centres: 2300 mm Swing over bed: 860 mm Swing over cross slide: 438 mm Bed width: 510 mm Dkjdpfx Aiey D I Nujiew Spindle mount: A2-11 Spindle bore: 152 mm Spindle speed range: 8 - 680 rpm, 12 steps Motor power: 22 kW Tailstock quill diameter: 120 mm Tailstock quill travel: 165 mm Quill taper: MK6

Condition: used, Year of construction: 2011, turning diameter 320 mm turning length 600 mm control Fanuc Oi-TD spindle bore diameter 74 mm number of controlled axis 2 turning speed range 3000 U/min rapid speed 20 m/min number of tapers in turret head 12 direkt tail stock Ja power requirement 15 kW weight 5,0 t dimensions 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis Dkjdpjyxr Htsfx Aiiew - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Dksdezd Aigepfx Aiiew Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,243 h, functionality: fully functional, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 620, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 810 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm Table width: 900 mm Table length: 400 mm Spindle speed (max.): 10,000 rpm Number of spindles: 1 Number of tool magazine positions: 23 Tool holder: BT40 MACHINE DETAILS Control unit: Heidenhain TNC 620 Total weight: 3,500 kg Dedpfxjyaq Sie Aiiekw Input voltage: 400 V Controller on-time: 25,243 h EQUIPMENT Documentation/manual Continuously adjustable speed Chip conveyor Internal coolant supply: 20 bar Disc wiper in coolant tank Air blast cooling through spindle or external External coolant gun Spiral chip conveyor Centralized lubrication

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 7001203, turning diameter over cross slide: 438 mm, spindle bore: 152 mm, turning diameter over bed slide: 860 mm, center width: 2,300 mm, spindle speed (max.): 680 rpm, bed width: 510 mm, TECHNICAL DETAILS Centre distance: 2,300 mm Swing diameter over bed: 860 mm Swing diameter over cross slide: 438 mm Bed width: 510 mm Spindle mounting: A2-11 Spindle bore: 152 mm Spindle speed range: 8 - 680 rpm Number of speeds: 12 Tailstock quill diameter: 120 mm Tailstock quill travel: 165 mm Dodjy Edw Rjpfx Aiijkw Quill taper: MT6 MACHINE DETAILS Motor power: 22 kW

Condition: used, Year of construction: 2009, functionality: fully functional, CONTUR MSL-400 Compact and powerful for flexible use: fast servo turret, (VDI-30) with 12 tools 700 mm turning length 52/74 mm bar capacity Dedpfx Aou Rtp Eeiiskw Robust roller guides CNC controls: SIEMENS, compact dimensions

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110532, turning length: 1,980 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, turning diameter over bed slide: 600 mm, controller model: Siemens 840DSL mit ShopTurn, TECHNICAL DETAILS Swing diameter over bed: 600 mm Distance between centers: 2,000 mm Turning length: 1,980 mm Spindle bore: 105 mm Speed: 2,500 rpm Power: 18.5 kW MACHINE DETAILS Control: Siemens 840DSL with ShopTurn Dodpfoy Ex Hmsx Aiiskw Number of gear stages: 2

Condition: good (used), Year of construction: 1998, Manufacturer: SAEILO Model: CONTUR TV 1000 Year of manufacture: 1996 Control system: Heidenhain Number of axes: 3 Travel distances: X-axis: 1,016 mm Y-axis: 610 mm Z-axis: 508 mm Work table: Table size: 1,080 × 580 mm Maximum table load: 600 kg Main spindle: Spindle speed: 5–8,000 rpm Spindle power: 11 / 16.5 kW Tool holder: SK40 Spindle gearbox: 2-stage Tool changer: Automatic tool changer Tool magazine: 40 positions Tool holder: SK40 Feed rate: Working feed rate: 0.25–5,080 mm/min Rapid traverse rate X/Y: 20,000 mm/min Machine weight: Approx. 6,000 kg Dksdpfx Aoz R I Stjiisw Equipment and accessories The machine features extensive equipment. - Heidenhain CNC control system - Automatic 40-position tool changer - SK40 tool holder - Electronic handwheel - 3D probe - 3-jaw chuck - Machine vice

Condition: excellent (used), Year of construction: 1997, Manufacturer SAEILO (Germany) Model CONTUR TV 1000 Year of issue 1997 Control system HEIDENHAIN X/Y/Z-axis movement 1016 / 610 / 508 mm Table size 1080 x 580 mm Max. Table load 600 kg Tool change 40 Spindle taper SK 40 Cutting feed speed X / Y / Z 0.25 to 5080 mm/min Rapid traverse X / Y / Z 20000 mm/min Rapid traverse Z 1500 mm/min Spindle speed 5-8000 rpm Dsdpfxougltxs Aiiekw Spindle power 11 / 16.5 kW Machine weight 6000 kg