Used Felder Bf for sale (131)

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Gedpfxsyfxa Ee An Robl

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Gbsdpfxeyfvhaj An Rjl Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Gjdpeyddqmsfx An Rsbl Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, machine/vehicle number: 0711ST0619, functionality: fully functional, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Godpfx Anoyddmno Rsbl Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: new, Year of construction: 2008, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 9 m/min, overall weight: 750 kg, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 500! Gbjdpfx Asyddgzen Rel TECHNICAL DETAILS Edge thickness: 0.4-5 mm Workpiece height: 8-60 mm Feed speed: 9 m/min Spindle speed of milling unit: 12,000 rpm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Radius scraper unit: R = 2 mm Polishing unit: 2 motors at 1,400 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 1,550 mm Weight: 750 kg FEATURES High-performance chain feed Support for coiled edge material Guillotine blades for cutting coiled edges up to 3 mm Glue roller for EVA granulate from the Teflon-coated glue pot Spring-loaded pressure unit with 1 rubber pressure roller and 2 drive rollers Milling unit 0.27 kW, 100-tooth 24-tooth saw blade

Condition: new, functionality: fully functional, edge thickness (max.): 2 mm, total height: 1,250 mm, total length: 2,100 mm, total width: 900 mm, plate height: 45 mm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 200! TECHNICAL DETAILS Edge thickness: 0.4 - 2.0 mm Panel height: 10 - 45 mm Feed speed: 5 m/min MACHINE DETAILS Dimensions (L x W x H): 2,100 x 900 x 1,250 mm Required compressed air: 6 bar EQUIPMENT Pneumatic end-cutting guillotine Flush and radius trimming module (a = 15°, R = 2 mm) Teflon glue pot Electric temperature control (20 - 250 °C) Gbodpjydc Uwsfx An Rel

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Gsdpfxsxzppbs An Rjbl Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: like new (used), DEMONSTRATION MACHINE Godpfx Anjxxi T Uj Rebl For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Gedporubg Hsfx An Rebl

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW Gsdoxlr U Ispfx An Robl - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Gjdjxl Dw Uepfx An Robl Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: Gjdpfxexrahcs An Robl X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area Gbsdpfx Asxdkw Eon Rel - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Gbsdpfxoxnxm No An Rjl Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm Gbjdpfxew Hckrj An Rol - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Gsdpfx Aexd Aitjn Robl Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Gbodpfxsw Hcygo An Rel Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 302.09.016.16, functionality: fully functional, operating hours: 5,213 h, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Y-axis working area: 1,970 mm Z-axis working area: 455 mm Gbodewkq Tpopfx An Rol Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available - CE marking present - Note: Vacuum pump bearings must be replaced

Condition: excellent (used), Year of construction: 2021, operating hours: 3 h, functionality: fully functional, Machine almost not used, like new, year of production 2021. Gbjdpfx Anjudy D Te Rjl Dimension of the table 220x80cm.

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet Gjdoxzu Nmopfx An Rsbl FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: used, Year of construction: 2013, machine/vehicle number: 320.03.003.13, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash CAD, H10 CNC Control, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, overall weight: 3,800 kg, controller model: H10 CNC Control, Windows 10, torque: 4 Nm, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 11 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 180 mm, tool length: 300 mm, tool weight: 1,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Godpfow Tkm Tjx An Rsbl Motor frequency: 50 Hz Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: excellent (used), Year of construction: 2010, 4 kW motor 4 knives Table length 198 cm Table width 41 cm Gsdpfx Ansul Utmo Rebl

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation Gbjdsw Afd Hopfx An Rel pneumatic oscillation motor power 11kW year of production 2011

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Gbsdpfx Anowi Ufts Rol Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: new, Year of construction: 2022, functionality: fully functional, noise level: 75 dB, total height: 2,285 mm, total length: 2,275 mm, total width: 1,150 mm, extraction nozzle diameter: 300 mm, space requirement height: 2,985 mm, space requirement length: 2,640 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Gedpfex H Srrex An Rebl Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Great and efficient performance Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022