Used Felder Bf 6 26 for sale (110)

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 Dkodpfx Aow I H Rkjc Neh With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2003, For sale is a used Felder planer-thicknesser AD7-31 with a planing height of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our professional staff (fully functional). Technical data: Dkodpsygg Rhjfx Ac Neh - Planing/thicknessing width: 310 mm - 4-knife cutterblock (reversible knife system) - Tiltable planer fence - Thicknessing height: 4–230 mm with handwheel and digital readout - Dual foldable planing tables - 2 feed speeds: 6 and 12 m/min - 5.5 HP (4 kW) motor, 400 Volt The planer-thicknesser is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer-thicknesser, thickness planer, Felder Reference: R-R00BE

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Djdpjxta Dysfx Ac Nskh Location: Supplier

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Dkodexta Dmspfx Ac Nsh

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm Dkodpfxowp Ri Us Ac Noh - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: like new (used), Year of construction: 2017, For sale is a Felder RL-300 clean air dust extraction unit with a maximum airflow of 6,000 m³/h. The extraction unit is in like-new condition and has been inspected and reconditioned by our professional staff. Technical data: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm (right) - Chip container volume: 2 x 210 liters - JET filter cleaning - Fire extinguishing system with water connection Dkedpfx Ajyffbvec Neh - 11 HP (8.2 kW) motor / 400 Volt 32A - Automatic star-delta starter The clean air unit is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-N4529

Condition: excellent (used), Year of construction: 2015, For sale is a used Felder KF 700 SP panel saw and spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been serviced and inspected by our qualified technicians. (Fully functional) Technical data: - Tilting saw and spindle moulder 90-45° - Sliding table 2800 mm - Extension table with mitre fence - Scoring unit with 1 HP motor - Cutting width 800 mm Dksdpfjyd Rdyox Ac Njh - Spindle fence 240 mm with multi-adjust system - 4 spindle speeds - 2 motors, each 4 kW (5.5 HP) The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, panel saw, spindle moulder, combined machine, combination machine, milling machine Reference: R-Z1580

Condition: excellent (used), Year of construction: 2018, Surface Planer FELDER / HAMMER Planing width: 410 mm Motor power: 4.0 kW, 400 V, 50 Hz Silent-POWER spiral cutter block Number of knives: 62 Max. cutting depth: 4 mm Adjustment lever for planing depth Planing table length: 1800 mm Tiltable fence 90°–45°, anodized Fence size: 150 x 1100 mm Extraction port diameter: 120 mm Emergency stop Ready to plug in with phase inverter CE compliant Approx. dimensions (L x W x H): 1900 x 800 x 1000 mm Approx. weight: 340 kg Note on used machines: • Technical details are subject to error and prior sale. • Listed prices are pick-up prices ex location – free loading! Dkodpfeydnptsx Ac Noh • The machine has been cleaned and function tested. • All machines are sold as seen without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Condition: excellent (used), Edge banding machine Felder G480, Pre-milling cutters, Glue application with roller, Pneumatic pre-cut guillotine, Pressure rollers, Trimming saws for finish cut, Top-bottom milling unit R1 – R2, Corner rounding unit, Profile scraper, Flat scraper, Edge thickness 0.4-3mm, Max panel height 50mm, Feed speed 9m/min, Total power requirement 7KW, Machine length without extension table 340cm, Dkjdpfsygkl Nox Ac Noh Condition very good

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested Dkedpfexdkzqex Ac Njh - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: Dodsycqiyepfx Ac Nekh – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min. Dksdpfxjxpn Ufo Ac Neh

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Dkjdpfx Ajyf I T Uoc Nsh Scraper knife

Condition: like new (used), For sale is a used Felder AF-12 extraction unit with a maximum air flow rate of 1,350 m³/h. The machine is in like-new condition and has been inspected and serviced by our qualified staff. Technical specifications: - Extraction capacity: 1,350 m³/h - Maximum negative pressure: 1,800 Pa - Chip collection volume: 100 liters Dksdpfx Aceycdqwj Noh - Extraction connection diameter: 120 mm - Motor power: 1.5 kW / 2 HP - Year of manufacture: 2025, like new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction Reference: R-H705E

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 Dedpfsyf A N Dsx Ac Nekh - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: like new (used), For sale is a used Felder AF-22 extraction unit with a maximum air flow rate of 3100 m³/h. The machine is in like-new condition, has been inspected and serviced by our qualified staff. Technical data: - Extraction capacity 3,100 m³/h - Max. negative pressure 2510 Pa - Chip container volume 2 x 200 litres Djdpfeycdbvjx Ac Nskh - Extraction port Ø 160 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2025, as new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction unit, dust extraction, wall-mounted extraction Reference: R-R04D8

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Dkedpfeyfxa Eex Ac Noh

Condition: good (used), Year of construction: 2022, operating hours: 167 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Further technical data 5,964 linear meters total 167 operating hours High-precision cross-cut saw unit with radius milling up to 2 mm edge materials Jointing unit incl. diamond cutters 5 mm package for bonding solid wood edges "Quick-Set System" for rapid adjustment to various materials Control panel with LCD display and keypad Exchangeable glue pot Ball-bearing turntable for roll edge material Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Turntable diameter: 740 mm Edge thickness: 0.4–5 mm Extendable workpiece support, extendable up to 450 mm Dksdpfx Acsyfv Ugs Noh Additional equipment 21 Surface scraper instead of polishing unit 42 Application of release agent by spraying

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 424.05.131.13, cutting length (max.): 3,200 mm, cutting width (max.): 800 mm, cutting height (max.): 104 mm, saw blade diameter: 315 mm, overall weight: 740 kg, rotational speed (max.): 4,000 rpm, input voltage: 400 V, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, saw blade guard, Further technical data Panel saw with blade tilting 90°–45° Cutting width 800 mm with full table length Minimum transport width 1000 mm Sliding table, cutting length 3200 mm, anodized Dsdpjyfuk Hjfx Ac Nokh Outrigger table 1500 mm Outrigger table crosscut fence 3200 mm Working height in mm: 890 Extraction connection diameter in mm for circular saw/blade guard (overhead guard): 120/80

Condition: used, Year of construction: 2015, height adjustment type: mechanical, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V - Supply frequency: 50 Hz Workpiece Dimensions - Edgeband thickness: 0.4 - 3.0 mm - Workpiece thickness: 10 - 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units - Edgeband feeding from a reel via a feed plate - Edgeband feeding thickness from 0.4–3 mm, manual feeding of single strips - Guillotine shears for trimming edgeband from the reel up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing/fixing roller - Saw trimming unit, 9,000 rpm, 0.18 kW, HW saw blades Z= 16, Ø 80 mm - Multifunctional milling unit, 12,000 rpm, 0.22 kW, radius machining, straight milling, chamfering - Radius scraper unit, mechanically engaged, for R= 2 mm - Flat scraper unit, mechanically engaged Dsdpfx Acsya Etho Nekh Operation: - Control panel with LCD display and keyboard - Quick, tool-free unit adjustment system (Quick system) Feed: - Edged workpiece transport by chain with track - Feed speed: 8 m/min - Extendable support General data: - Extraction connection Ø 120 mm Overall dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm - Weight: 360 kg On customer request: - The machine is suitable for processing PVC and ABS edgebanding 0.5 - 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue tank - Pre-cut guillotine - Edgeband trimming with two saw units - Quick machine calibration system by placing a piece of edgeband in the dedicated clamp - The machine has been regularly serviced, lubricated, and cleaned, ensuring its excellent technical condition. - An ideal solution for demanding carpentry workshops and manufacturing plants.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: FORMAT-4 Profil 45 Z spindle moulder with x-motion control, year of manufacture 2017. The machine is in excellent condition, as it has seen very little use. Equipment / Features: Model: FORMAT-4 Profil 45 Z Dkodpfjyfgbdjx Ac Neh Version: Spindle moulder with x-motion control Year: 2017 Precision and robust industrial design Suitable for professional use Condition: Very good condition Technically flawless Hardly any signs of use If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2022, Offered for sale on behalf of a customer. Used only once. Dkedpfx Aoyc Nrtsc Noh If you have any questions or are interested, please feel free to contact us.

Condition: used, Year of construction: 2022, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 Financial information Dkedpfox Tt Unox Ac Njh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 200-11.005.13, total length: 4,185 mm, total width: 1,378 mm, overall weight: 2,200 kg, power: 11 kW (14.96 HP), pressure: 6 bar, Types: PERFECT 710 glue tank unit, joint milling unit, crosscut saw unit, edge and radius milling unit, grooving unit, corner rounding unit, polishing unit Dkedpfjycfygex Ac Njh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) Dsdpfxetp T Dte Ac Nekh * Perfect technical and visual condition