Sliding table saw

Felder Kappa 550

Condition: used, Year of construction: 2020, Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2020 Technical data Bedpfx Ake Ah E Rzoneww - Circular saw unit, 0 - 46° swivel, maintenance-free, - Maximum cutting height 200mm, under-table dust extraction - Upper guard, cutting width 1000mm, hood for 90° cuts and hood for angled cuts, height-adjustable and can be swiveled away - Dust extraction connection 100mm - Circular saw table extension up to 1200mm behind the saw axis - Parallel fence with fine adjustment, fence ruler length 1200mm, can be swiveled - Crosscut fence 3200mm, swivels 90-45° - Kappa 550 control unit with programmable angle and height positioning, cutting height correction during swiveling - Machine stand Kappa 550, circular saw table 1180x610mm - Electrical system Kappa 550, 2x400V 50Hz CE, 10 kW S6 with star-delta starter - 3 speeds 3000/4000/5000 rpm. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, Bwjdpfxszd Uf To Aknew carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm Bwjdpfezuywiox Aknjw - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: used, Year of construction: 2019, machine/vehicle number: 604.11.059.19, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 200 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, total length: 3,200 mm, total width: 450 mm, total height: 1,200 mm, overall weight: 1,200 kg, table height: 1,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Felder Kappa 550 circular saw, 0-45 degree swivel, maintenance-free, saw blade D=250mm-550mm Extension arm 1250mm x 650mm, cutting length 3200mm, crosscut function. Kappa 550X - motion control with LCD screen with touch function...etc. Circular saw table extension 1620mm Additional light, scoring unit, red LED strip marks the danger area. Scoring unit Control with 3 controlled axes. Cutting width 1250mm, aluminum, anodized. Controlled parallel fence 1250mm Sliding table 3200mm Rip fence 3200mm with 2 fence blocks, digital The machine was used in a two-person business and has hardly been used for the past 2 years. The saw was only used for fine work (not for carpentry). Selling due to retirement. Bwodj Ad Ituopfx Aknow If interested, please request more information.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Bedpfx Asytp Hrjkneww

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Bodozuy A Espfx Aknsww Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Bedji Dfidjpfx Aknjww Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Bodpfxjpgkmwo Aknsww Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Bwodoyg Nu Nopfx Aknjw

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Bwsdpfx Aehp Rcroknew Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support