Used Feeding Device for sale (21,502)

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Gjdpezi A Eljfx Aa Esud Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Manufacturer: PH Maschinenbau Gsdpfx Ajzin A Aja Ejud Type: PH-RBA 30000-SO AT01H424 Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Weight: 3.2 t Good condition

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Gjdjzinzlepfx Aa Eeud Good condition

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° Gsdpezil T Eofx Aa Esud - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Guedpfx Aozil R Rea Ejd Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Mitutoyo Model: QV-L404Z1L-D Item Description: For sale is a CNC vision measuring machine from the renowned manufacturer MITUTOYO. This is the Quick Vision Active 404 model. The device is ideal for precise optical measurements in production, quality assurance, and research. Technical Data: Brand / Type: Mitutoyo QV-L404Z1L-D (Quick Vision Active 404) Measuring range (X / Y / Z): 400 × 400 × 200 mm Camera: CMOS color camera Software: Mitutoyo QVPAK QVPAK (R) Version: 13.301.0075 Optics: Zoom lens, LED illumination system Worktable: High-precision glass stage Equipment: Control PC with QVPAK measuring software 2 × 22" TFT monitors Keyboard & mouse Control panel Swivel office chair for comfortable operation Scope of delivery: Mitutoyo Quick Vision Active 404 measuring device Control PC with QVPAK 2× TFT monitors (22") Keyboard, mouse Guedezii Dujpfx Aa Ejd Control panel Swivel office chair Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors reserved!) Further questions can gladly be answered by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A Gjdpfszii Akjx Aa Eeud - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Godpfoziiy Nex Aa Eoud Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Gsdpfx Ajziixfea Eoud Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), 3x diamond cutting discs (individual sale possible) Gedpfxezkwkfe Aa Ejud

Condition: ready for operation (used),

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Gujdpfxswvh A Ee Aa Eed

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  - Capacity (beverage volume): 6.000 - 36.000 l/h Guodpfx Aaoyhpdaj Ejd - Dosing rate: up to 20 ml Velcorin / hl - Flow meter Endress + Hauser Further details against request. 

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  - Capacity (beverage volume): 6.000 - 36.000 l/h - Dosing rate: up to 20 ml Velcorin / hl - Flow meter Endress + Hauser Further details against request.  Gsdpsyhn Sijfx Aa Eoud

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200 mm - Max. height of workpiece: 150 mm - 2 sanding units: upper – metal roller + backing pad + metal roller lower – metal roller + backing pad + metal roller from above: - metal pressure roller - sanding unit - slip metal pressure roller - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - metal pressure roller - cleaning brush - output roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts - stepless feed rate adjustment - feed motors: 0.55 kW - main motors: 2 x 4 kW - air consumption: 6-8 bar - diameter of dust extraction nozzles: 3 x 80 mm, 1 x 120 mm - overall dimensions (L/W/H): 1800 x 2070 x 2000 mm, weight: 1422 kg Godpfxozh H Twj Aa Eoud - Made in Germany - Unpainted - Very good condition, used sander Net price: 22900 PLN Net price: 5452 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), Edge trimming machine Working height: 800 mm Guodpfowiwnqjx Aa Esd Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. Gsdozh Ht Repfx Aa Esud All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen Guodpfx Aedify Isa Eed chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Gusdozh D S Rjpfx Aa Eed Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels Guodpedvm Euefx Aa Eed - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: new, Made in Italy. Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. Guodpfxsd Nk Ncj Aa Eed - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity: 5 available Manufacturer: Stahl Prüftechnik Type: FR-110.01A Function: Testing device for functional and process monitoring in industrial applications Gjdpfx Ajzh A D Eja Ejud Power supply: 230 V AC Display: LED / Digital display Housing: Metal Application: Quality assurance, leak testing, process control

Condition: good (used), Year of construction: 2012, Sepro SR Axxes7 S3 x=400 mm y vert=800mm Z(horiz.)=1500mm +C +A(R1, R2) year 2012 Stock: 1 · price: €11,500.00 contact: Mr. Rainer Eckerle Gujdpfx Aezkkkrja Eod

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm Gedpfx Aaozkhbns Ejud - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Load turner Payload capacity: 1 to 1000 kg Connection: 400V, 16A Gusdjxwd Iqspfx Aa Eod Item location: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection by appointment