Used Feed Roller for sale (22,213)

Condition: excellent (used), Catalogue number 6349 TECHNICAL DATA - Max. workpiece width: 250 mm - Max. workpiece height: 110 mm 2 sanding units: top and bottom Top side: - 2 slip-feed pressure rollers - Sanding unit with 2 metal rollers + pad - Slip-feed pressure roller Lodpfx Aohby R Aof Eehn - Rubber feed belt – VACUM Bottom side: - Feed belt - 2 slip-feed metal rollers - Sanding unit with 2 metal rollers + pad - 3 metal outfeed drive rollers - Paper cleaning system on upper and lower sanding units - Electrically adjustable sanding height - Oscillating sanding belts - Infinitely variable feed speed via frequency inverter - Main motors: 2 × 5.5 kW - Air requirement: 8 bar - Extraction port diameter: 4 × 100 mm - Overall dimensions (L/W/H): 1400 × 1200 × 1850/2250 mm - Weight: 1,490 kg – For short workpieces (VACUM belts) – German-made – DTR documentation available – Unpainted – Used sander, in very good condition Net price: PLN 26,900 Net price: EUR 6,400 (depending on exchange rate of 4.2 EUR) (Prices may vary in case of large fluctuations)

Condition: good (used), Year of construction: 2016, Scissor lift table, scissor lift table, scissor lifting platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 2000 kg -Platform: 2415 x 1270 mm -Dimensions retracted: height 235 mm -Extended dimensions: height 1030 mm -Rollers: diameter 40 x 390 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1570 mm -Weight: 720kg Lhedpfxeuqf Rms Af Ejn

Condition: good (used), color: other, Year of construction: 2023, operating hours: 200 h, Make of engine: Kubota CE mark: yes Number of owners: 1 Lhodpfsxq Afnsx Af Een Technical condition: good Visual appearance: good EPA Marked: yes Production country: DE Please contact Jonas Francken for more information

Condition: used, power: 115 kW (156.36 HP), Year of construction: 2021, operating hours: 3,330 h, Year of manufacture: 2021 Lhsdpfxsxb Aymo Af Een Empty weight: 16.000 kg Dimensions (LxBxH): 595 x 231 x 296 cm Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm

Condition: used, machine/vehicle number: 006327, Max. panel width: 1300 mm Max. panel length: 2800 mm Lhsdpfx Ajwcydnsf Ejn

Condition: used, tank capacity: 1,000 l, GENERAL Remarks: Containers are equipped with a pump at the bottom (see photos) Internal diameter: 1,320 mm Overall width: 1,350 mm Ljdpexqcdkofx Af Eshn Overall height: 2,400 mm Overall length: 2,210 mm Base design: mobile frame Location: Bremen Volume: 1,000 liters Cylinder wall thickness: 3.1 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 550 mm Last application: transport container for viscous gels CONTAINER Bottom: conical bottom EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet (alternative entry): 72 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.0 mm Top head wall thickness: 2.9 mm

Condition: used, Year of construction: 2014, operating hours: 5,144 h, Single drum roller, vibration frequency 33 Hz, centrifugal force 279 kN, climbing ability 59/64%, engine DEUTZ, good condition, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Ljdpfx Afjvnnqzs Ejhn Please contact us!

Year of construction: 2004, condition: excellent (used), age 2004 anilox roller 90 lines / cm - screening 229 L / inch anilox roller with 100 lines / cm - screening 250 L / inch like new condition suitable for Heidelberg SM CD 74 Delivery time: immediately from stock Lhjdegnc Tbopfx Af Eon

Condition: good (used), color: other, Year of construction: 2021, operating hours: 550 h, Make of engine: Kubota CE mark: yes Number of owners: 1 Technical condition: good Visual appearance: good EPA Marked: yes Production country: DE Ledpjxq Afbefx Af Eehn Please contact Jonas Francken for more information

Condition: used, Year of construction: 2020, operating hours: 2,860 h, Year of manufacture: 2020 Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Lhjdpfx Afjxqfdts Eon Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Lsdpfx Afeu N Slve Eohn Max. panel length: 3200 mm

Condition: used, Technical details: material width: 400 mm material thickness: 2 mm Lodpfx Afsu Ic Dyo Eohn Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! *

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min Lhodovuk Sbjpfx Af Eon power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical data: - width of rollers 1350mm - max. throughput height 70mm - application of glue on one and both sides - 2-roller - diameter of rollers applying glue top/bottom 160mm - main engine 0.75kW - dimensions length/width/height 2000x750x1550mm - weight about 534kg ADVANTAGES - German production - used glue applicator - very good condition Lsdpjvy Tt Esfx Af Eehn Net price: PLN 13900 Net price: EUR 3270 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), color: other, Year of construction: 2017, operating hours: 550 h, Empty weight: 1.900 kg Ljdpfx Aexq Ab Ajf Ejhn Make of engine: Kubota CE mark: yes Number of owners: 1 Technical condition: good Visual appearance: good Production country: DE Please contact Jonas Francken for more information

Condition: used, color: orange, Year of construction: 2020, operating hours: 2,480 h, Year of manufacture: 2020 Empty weight: 11.200 kg Dimensions (LxBxH): 585 x 228 x 296 cm Engine type: Deutz Deutz TCD 4.1 L4 Lodpfxexqfdmo Af Eohn Roller width: 2140 mm

Condition: used, Technical details: material width: 200 mm material thickness: 1,5 mm Lsdpfx Afju Ic D Tj Eshn Number of Straightening rolls: 5x oben/upper/arriba no. of rolls: 6x unten/ lower/abajo throughput speed: nicht bekannt/ unknown/desconocido m/min current: 220/50 A/Hz total power requirement: 1,5 kW weight of the machine ca.: 0,447 t space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable *

Condition: used, Year of construction: 1995, material width 310 mm material thickness 0,2 - 3,0 mm roll diameter 80 mm Lhedsvzxpzjpfx Af Esn feed length 0 - 9999,9 mm speed 80 m/min power requirement 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 1,5 x 1,0 x 1,2 mxmxm electronic Servo roll feed with AC Servo-Motor (Siemens), pneumatic intermediate lifting of the rolls, band guide (centrally adjustable), inlet roller basket, mounting bracket

Condition: used, color: other, Year of construction: 2015, operating hours: 900 h, Empty weight: 1.450 kg CE mark: yes Number of owners: 1 General condition: average Technical condition: average Visual appearance: average Lhsdpoxqz U Ujfx Af Eon Production country: DE Please contact Jonas Francken for more information

Condition: used, Technical details: plate width: 400 mm Lhodpfx Afsu Iczfe Een max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. *

Condition: used, material width 45 mm material thickness 45 mm feed length 100 mm compressed air 6 bar clamping force of fastening pincer 25000 N clamping force of moving pincer 15000 N feeding force 10000 N weight 0,1 t Dimensions (WxDxH) 0,6 x 1,0 x 1,0 m hydraulic pincer feed with special clamping jaws for profiles Ledpfxjvuunyo Af Eshn diameter approx. 45 mm as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Lhodpfeu N E Htsx Af Een Both pumps = 7.5 kW Weight 164 kg *

Condition: used, material width 200 mm material thickness - 6,0 mm Lsdsvuuntspfx Af Eehn feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1982, material width 203 mm material thickness 0,1 - 1,9 mm feed length 0 - 101 mm feeding force 450 N clamping force of moving pincer 2250 N clamping force of fastening pincer 650 N weight 0,02 t Ljdpfxsvuumve Af Eshn required space (WxDxH) 0,5 x 0,8 x 0,5 m pneumatic pincer feed with pneumatic control, electromagnetic valve, pneumatic intermediate lifting of the gripper clamp, mounting bracket max. stroke rate at max. feed length 160 / min WITHOUT any additional work can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control via light barriers Lsdpfx Asvuk N Hsf Ejhn can be inspected in running condition in our warehouse