Single drum roller

Caterpillar CB-535B

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Isdpfx Asl Hx Rpsbneif

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 604 kg, input voltage: 400 V, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. Isdjw Hzyxjpfx Abnjif LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 44,035 km, power: 48 kW (65.26 HP), first registration: 12/1977, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 2,000 kg, overall weight: 4,600 kg, tire size: 6.00R16C, axle configuration: 4x2, wheelbase: 3,500 mm, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, loading space length: 3,050 mm, loading space width: 2,000 mm, loading space height: 1,700 mm, Equipment: additional headlights, cabin, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 4, storage box, leaf suspension, tarpaulin and bows, air+light trailer hitch, lashing eyes, U-protection, pendulum flaps Wheelbase: 3500 mm Body: Platform body with tarpaulin Spare wheel available at extra cost! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iedpfx Aevhi Tdjbnoif - .

Condition: used, Year of construction: 2022, operating hours: 390 h, * Bomag BW 213 D-5 single drum roller * Year of manufacture: 2022 * 390 operating hours Iedpoyr U Tnjfx Abnsif * Euro 5 emission standard * 12,500–14,800 kg * 95 kW Deutz engine * Air conditioning * Tyres: 23.1-26IND * LIKE NEW!

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Ijdpfxoyhzq Aj Abneif Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: used, axle configuration: 2 axles, first registration: 04/2004, color: other, Year of construction: 2004, Carrying capacity: 14.160 kg Iijdpfx Aoy Edxhjbnof

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Reversible Plate Compactor MS125 TECHNICAL DATA Model: ETP65-2 Engine: Petrol, LONCIN Engine type: G200F Power [kW/hp]: 4.8 / 6.5 Weight [kg/lbs]: 65 / 143 Vibrations per minute: 5400 Centrifugal force [kN]: 10 Compaction depth [cm/in]: 20 / 8 Forward travel speed [cm/s/in/s]: 40 / 16 Theoretical performance [m²/h/ft²/h]: 450 / 4800 Plate width [cm/in]: 50×36 / 20×14 Dimensions [cm/in]: 108×40×80 / 43×16×31 12-month warranty; after this period, we continue to provide all spare parts and professional service as needed. Iisdpeyk T Hkofx Abnjf PRICE: €800 net €952 gross

Condition: excellent (used), functionality: fully functional, empty load weight: 7,800 kg, Year of construction: 2007, operating hours: 4,170 h, Equipment: air conditioning, cabin, Hamm 3307 HT Vio single drum compactor, year 2007 with only 4,170 operating hours, in good condition, immediately ready for use, weight 7,800 kg. Transport and delivery possible. We also prepare customs/export documents. Viewing by appointment, also possible on weekends. Iedjykktzopfx Abneif

Condition: used, loading space length: 6,060 mm, loading space width: 2,440 mm, loading space height: 2,800 mm, Year of construction: 2007, Empty weight: 2.000 kg General condition: average Technical condition: average Visual appearance: average Please contact Christian Theißen for more information Manufacturer: Unknown Model: Office container Year of build: 2007 Condition: Used Data: Dimensions LxWxH: 6055x2435x2800 mm Weight: approx. 2.000 Kg Colour: red Transport Points in accordance with ISO Standard: in the Corners, Forklift pockets available Iiodpfx Ajzpxpmebnof stackable: 3-times Drainage of rainwater: via circumferential Drainage gutters in the frame, with downpipes in the corner posts Windows: white PVC-Windows Powerinstallation: 2 sockets Lighting (2x16W): 2x double light bars Information: Used, damaged, dents on the outer walls Location: 97828 Altfeld nearby Marktheidenfeld immediately available

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, tank capacity: 36,784 l, total height: 6,245 mm, inner diameter: 3,400 mm, outer diameter: 3,770 mm, overall weight: 4,000 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 2 x 37 m³ CCT Vessels / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 2 Total volume: approx. 36,784 liters Tank type: Pressure vessel Condition: used Suitable for food use: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Cone wall thickness: approx. 3.5-5 mm Top head wall thickness: approx. 6 mm Shell/Cylinder wall thickness: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: Stainless steel V2A (1.4301) Internal surface: ground and pickled Heating/Cooling System Cooling medium: Glycol Operating pressure: 3.0 bar Operating temperature: -3 °C Heating/Cooling system material: Stainless steel V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. capacity 1 x cone cooling zone with approx. 40 ltr. capacity Iijdpsyhzrgjfx Abnof Insulation Insulation thickness: approx. 150 mm (shell + top head), cone: 100 mm Insulation material: PU foam Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminium trapezoidal sheet Equipment Mounting type: Suspension lugs Number: 4 Fastening: fixed Top head type: Torispherical head Lower head type: Conical Top head: 1 x manway DN 1000 with insulated hood and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray tube (removable) 1 x Cleaning-Air valve combination (RLV) consisting of: 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x temperature measuring connection with insulated box 1 x condensate pipe DN 32 1 x sampling line DN 10 1 x cable protection pipe DN 50 1 x cleaning line DN 50 1 x return manifold DN 40 (cooling) 1 x supply cooling DN 25 1 x cooling vent DN 10 1 x cooling drain DN 20 Lower head/cone: 1 x sample valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded outlet DN 100 Documentation: Drawing Inspection book TÜV certificate