Used Feed Press for sale (37,503)

Condition: excellent (used), Year of construction: 2008, operating hours: 3,520 h, functionality: fully functional, briquette diameter: 65 mm, Equipment: emergency stop, Briquetting Press Höcker Polytechnik - Model Brik Star C11-18 - Year of manufacture 11/2008 - Throughput capacity 130 - 160 kg/h - Operating hours 3520 - Motor 11 kW Bledpjxztgdsfx Ab Tjr - Operating manual - Conical discharge with auger - Additional oil cooler - Light barrier - Test run on site possible upon request

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm Bsdoxzr Ruspfx Ab Tjlr F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,150 mm, total width: 1,100 mm, total height: 2,000 mm, Lithographic press, also known as scraper press, for manual printing from lithographic stones. Used by artists/lithographers, in schools, art schools, and museums. The machine was most recently used in the atelier of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 70 x 100 cm. Also very interesting as a display piece in entrance halls, restaurants, etc. Bodpfx Abox A H I Do Tolr

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 160 t, stroke length: 200 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Used Bystronic Xact 160 EP 40-160 CNC Pressbrake For Sale Capacity: 4metre x 160ton With: Cybelec DNC 880S Control Bsdpfx Abex A E Rkj Tslr 4 Axis (Y1, Y2, X, R + Crowning) Safety Guards Fully Enclosed Rear Glass Doors Wandering Foot Pedal/Pedestal Stop Serviced with Bystronic UK With upper and lower tooling

Condition: good (used), Code: 0160 Brand: SMC Model: REGO 92 CP Automatic oleodynamic clamp press with movable crossbar for wooden frames, sashes, doors, frames and various - CE Standard Technical data: Useful working dimensions mm 3000 x 2000 N° 2 horizontal cylinders N° 2 vertical cylinders Bledowx Ru Ajpfx Ab Tor Motor Kw 3 N° 2 crossbar support positions Push-button control panel Safety photocells Overall dimensions mm 3600 x 1300 x 2800 h Weight kg 1850

Condition: good (used), Year of construction: 1987, control type: CNC control, bending force (max.): 1,250 t, throat depth: 770 mm, distance between stands: 10,160 mm, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics Bedpfxox A Erzs Ab Tjlr - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: excellent (used), Year of construction: 2015, Pressing force: 320 tonnes Number of axes: 4 CNC crowning, ABC option Bending length: 4 m Blodpfoxzpt Tsx Ab Tjr

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Bodpfx Aoxzppbsb Tslr Reference: R-D1618

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: No.1469/77, mold height (min.): 2,356 mm, Gietz – Proofing Press / Luxury Model Manufactured in the 1960s in Switzerland, print format 52 x 68 cm A beautiful, compact, and solid example. Technically impeccable and fully operational – the ideal printing press for museums, schools, workshops, and dedicated hobby artists seeking an authentic, durable piece of equipment. Bedpfx Abjx A Eaxs Telr Previously located in the atelier of the Gutenberg Museum in Fribourg, Switzerland. This machine is highly versatile and can be used for letterpress printing with lead or wooden type, woodcuts, linocuts, blind embossing, die-cutting, and much more.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: 121446, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, bending force (max.): 110 t, working width: 3,600 mm, distance between stands: 3,100 mm, number of axes: 2, oil tank capacity: 120 l, power: 7.5 kW (10.20 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Darley Press Brake EHP 110 36/31 Press force: 110 tons Bending length: 3600 mm Bending length between uprights: 3100 mm Rapid approach speed: 100 mm/sec Working speed: 8 mm/sec Return speed: 65 mm/sec Stroke length: 150 mm Control: DELEM DA 22 Total power requirement: 7.5 kW Machine weight: approx. 10,100 kg Dimensions: approx. 3650 x 1290 x 2550 mm Equipment: - CNC-controlled axes Y1 - Y2, X - Electric backgauge (X-axis) - 2x manual backgauge stops - Wila hydraulic upper tool clamping - Side protection with electronic safety - Foot switch and hand switch Machine is still in use. Service has always been performed by SafanDarley Eijsden. Blades as shown in the photo included. Bedpfx Abex A Ealo Tolr v10-v24 lower dies If interested, you can inspect and test the machine on location.

Condition: used, Applicable material: Metal Auction item. The press has been unused for a year, it was in working condition a year ago. Blsdpfsx A Dr Hsx Ab Tsr Year of manufacture unknown. Sold as seen in the photos.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification Bedpjx A Erbefx Ab Tjlr - Back stop - Roll shelf

Condition: good (used), Year of construction: 1997, functionality: fully functional, total length: 8,000 mm, total width: 2,000 mm, total height: 2,700 mm, working height: 1,600 mm, input voltage: 400 V, overall weight: 3,900 kg, type of input current: AC, power: 9.4 kW (12.78 HP), Lisec gas filling press for maximum unit size 2500 x 1600 mm, year 1997, running direction left/right, consisting of: - RSVN-27/16, frame set section - RTVN-27/16MZ, measuring section for gas filling press - FPS-25/16U, gas filling press for Argon - RTVB-27/16ST, gas filling press outlet conveyor the machine is in very good working order and is available from our stock in Hofkirchen/Austria Blsdpfx Absr Igmwe Ter Additional outlet conveyors are available as an option

Condition: good (used), AGEO SP 60/1000 Four-column press Bledpfxewqx Eaj Ab Ter -CE marking -Year of manufacture 1998 -Press force 60 tons -Four guide columns -Hydraulic return stroke -Light gap between columns 1000 mm -T-slot table 900x700 mm -Height clearance 415 mm Dimensions: LxWxH 1.8x1.6x2.5 meters / weight 3.5 tons Subject to errors / input mistakes

Condition: used, Year of construction: 1980, functionality: limited functionality, WAGNER MECHANICAL ECCENTRIC PRESS — 500 TON — DOUBLE COLUMN Brand: Wagner Model: 500 ton Eccentric Press Year: 1980 Mechanical overhaul: 2010 Electrical panel: overhauled in 2011 Condition: partially operational Type: double column – eccentric system Strokes/min: 0–30 Slide stroke: 300 mm Slide adjustment: 140 mm Clearance at TDC: 1100 mm Front column opening: 1850 mm Side window: 800 mm Bolster: 1800 × 1000 mm Ram: 1800 × 1000 mm Number of pressure points: 2 Ram guides: 8 Blsdpfx Aex A Akzeb Tsr Guards: front and rear Machine dimensions: 3000 × 2000 × 6000 mm Weight: 50 tons Foundation required: 100 cm Accessories: ELMEA L500 power supply feeder Status: available for inspection

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12501, ram adjustment: 30 mm, table width: 222 mm, table length: 322 mm, installation height: 197 mm, stroke adjustment: 42 mm, overall weight: 450 kg, pressing force: 10 t, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Bljdjx A Ah Tspfx Ab Tjr

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Bledjtwliwepfx Ab Tor Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Bsdpox A D Sgefx Ab Tjlr Additional information - Distance between table and press beam: 1,800 mm

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Blsdpfoxzlqhex Ab Tor Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t Bedex A D Afepfx Ab Tslr

Condition: ready for operation (used), Year of construction: 2014, Main Drive Pressing force 3200 kN Bending length 1020 mm Additional Equipment Backgauge system with 5 axes and control cabinet climate control Upper tool clamping: hydraulic and hardened Lower tool clamping: hydraulic CNC Crowning BendGuard safety device Foot switch 2x support consoles, front 1x bending aid with 900 mm parking position Table extension for base table / additional table This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. Blsdpsxzlt Aofx Ab Ter Application Types Bending

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Blsdpfx Abex A Dy Do Ter Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements height 1000 mm Dimensions Machine Length 3100 mm Blodpexzlrrefx Ab Tsr This Columbus Vacuformtisch XL was manufactured in 2006. A used vacuum press with a total length of 3100 mm, width of 1550 mm, and height of 1000 mm. It offers a usable area up to 2900 mm by 1300 mm, with a total pressure capacity of 29 tons. Ideal for diverse laminating needs. Contact us for more information about this machine. Application Types Pressing / Laminating

Condition: good (used), Year of construction: 2011, Pressure 160 t Total power requirement 18.5 kW Machine weight approx. 13.5 t Blsdpfx Absx A Dxme Tor

Year of construction: 2007, condition: ready for operation (used), Additional Equipment Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation Bledpfxexzltvo Ab Ter This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Bending