Used Face Grinding for sale (5,040)

Condition: used, centre height 200 mm dist. between centers 1.000 mm grinding length 1.000 mm max. workpiece diameter 360 mm grinding wheel width 127 mm spindle tunring speed 1.500 U/min turning speed range - workpiece spindle 15 - 320 U/min dimensions 2,80 x 1,50 x 1,70 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has been overhauled. The guideways have been re-scraped. The spindle has new bearings. The control cabinet is new. Iodsy Ay N Depfx Aa Eeti Accessories, tools, and clamping devices shown in the images are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and Itodpfjx I Sigjx Aa Eoi errors. Prior sale is reserved.

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Itjdpfx Aaexq Hkuj Eji The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system Ijdpfxexc Nyvs Aa Ejti An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2002, Automatic reamer tool grinding machine – reamer blade grinding machine Type: ARS 2000 Weight: 7,000 kg Year of manufacture: 2002 - for grinding the chip chamber and chip surface on round reamer tools Ijdpfjzl D Dhex Aa Eoti Gear length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution of the X-axis: 0.001 mm Resolution of the Y-axis: 0.001 mm Resolution of the Z-axis: 0.001 mm Resolution of the W-axis: 0.001 mm Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: Hard disk 20 GB Operating system: Windows 2000 Axis control: 4 axes Simultaneous operation of 2 handwheels

Condition: used, Year of construction: 2006, functionality: fully functional, grinding width: 900 mm, For sale are professional, wide-belt wet grinding machines, BÜTFERING PROFI SPW 409 RTTR (SteelMaster Prima), designed for grinding the surfaces of stainless steel, aluminum, and other metals after laser cutting. The machine is in good technical condition and fully functional, but 2 out of the 4 grinding stations require calibration or repair, as they are currently grinding with insufficient accuracy. Two stations are operating accurately. The machine is connected and ready for inspection and testing. Technical specifications: Manufacturer: BÜTFERING Iodpfx Aezkh Stja Esti Model: PROFI SPW 409 RTTR / SteelMaster Prima Year of manufacture: 2006 Made in: Germany Number of stations: 4 Power supply: 400 V / 50 Hz Required air pressure: 8 bar Grinding width: 900 mm Equipment: 4 grinding stations Touch screen control panel Wet grinding system Conveyor belt Adjustable feed rate Industrial cooling system Ideally suited for: Stainless steel products Aluminum products Sheet metal processing companies Metal surface preparation prior to painting Removal of slag after laser or plasma cutting Surface grinding and satin (No. 4) finishing. If you have any further questions, please do not hesitate to ask.

Condition: used, grinding length: 1,850 mm, grinding width: 830 mm, grinding height: 700 mm, table length: 1,700 mm, table width: 500 mm, CNC ECS 2400 GRINDING LENGTH: 1850 MM GRINDING WIDTH: 830 MM GRINDING HEIGHT: 700 MM TOTAL STROKE: 2000 MM TRANSVERSAL STROKE: 750 MM MOTOR POWER: 14.7 KW GRINDING WHEEL SPEED: 1450 RPM ELECTROMAGNETIC TABLE 500 X 1700 MM COOLING TANK WITH PAPER FILTER WHEEL DIMENSIONS: 450 X 76 X 127 MM OVERALL DIMENSIONS: 6100 X 3240 X 3000 MM Itedpezl Dnmjfx Aa Eei WEIGHT: 14,500 KG

Condition: used, Mobile table with dust extraction Used Price ex works Iedpfx Aajzlxple Eoti Self-collection

Condition: used, Year of construction: 1960, x-travel 500 mm breite 450 mm Itjdpfx Aozkbqiea Eji serial number 386 weight of the machine ca. 1,8 t

Year of construction: 2009, condition: ready for operation (used), A G+H precision cylindrical grinding center is available. Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, X/Z feed rate: 8m/min, workhead taper: MT4, tailstock quill stroke: approx. 35mm, tailstock taper: MT4, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm, max. speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. grinding wheel diameter: 100mm, filter capacity: 300l, filter flow rate: 100l/min, chuck: three jaw chuck, chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg, operating hours: approx. 350h. Including chuck, magnetic fixture and dressing unit. Documentation vorhanden. An on-site inspection is possible. Itjdpfx Aszlt Ntoa Esi

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW Itodpszi Strsfx Aa Eei - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2002, Grinding area: 550 x 200 mm Itedpfx Ajzi R Sgoa Eoi Max. grinding height: 390 mm Grinding wheel dimensions: max. 225 x 20 mm Bore: 50.8 mm Speed: 2,880 rpm Max. table load: 200 kg Machine weight: 1,800 kg

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 17/2022, A shot blasting chamber (shot blasting booth, sandblasting booth) is a specialized, enclosed space designed for cleaning and modifying the surfaces of large-sized components and steel structures. It enables the removal of rust, paint, and scale using a pressurized abrasive jet. Itsdpszlrwvjfx Aa Eei

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. A wide range of accessories and a user manual for the machine are included. Clean and good condition Itedszlrmdepfx Aa Esi

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine, few operating hours. 3.7 kW motor for high material removal rate, robust design, suitable for continuous commercial use. Steel drums with hard rubber coating for perfectly flat, smooth surfaces. Independently adjustable rear drum for controlled material removal. Two-stage feed gearbox for adaptation to different types of wood. Heavy-duty feed table made of gray cast iron, precisely guided by four spindles. Drum hood with double dust extraction connection and guide plates for efficient dust removal. Digital height indicator for quick and safe adjustment to the desired dimension. Abrasive belts with 75 mm and 100 mm width can be used. Technical data Feed motor: 0.18 kW Scope of delivery 80 grit abrasive belt mounted on the drum Isdpfx Aeziw Afoa Esti 100 grit abrasive belt mounted on the drum Height crank, operating manual and spare parts list.

Condition: used, Year of construction: 1980, Round grinding machine (internal and external) KELLENBERGER 1000 U-175, serial no. 32460-2247, year of manufacture 1980, max. grinding length 1,000 mm, max. diameter 350 mm. Itsdpfx Aszlpr Dsa Esi

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors. Itjdpfxezlnvbo Aa Eji

Condition: good (used), Hardly used Elektra-Beckum double bench grinder with stand and container, in good, fully functional condition. Iodpfxezlnu Rs Aa Ejti Shipping not possible Please do not send email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only possible by prior telephone arrangement! Subject to change, interim sale, and errors.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Itedpfx Aaexc Nype Eei Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm Itjdpfx Aaszi Ey Ss Eji workpiece height 350 mm table-size 820 x 350 mm dist. center of grinding spindle - table 140-525 mm table movement 660 mm workpiece weight max. 400 kg diameter / bore of grinding wheel 350 x 50 x 76,2 mm table speeds 2-28 m/min power capacity - grinding motor 3,7 kW total power requirement 8 kW weight of the machine ca. 2100 kg dimensions of the machine ca. 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition

Condition: excellent (used), Sanding belt width: 200 mm Sanding belt length: 1800 mm Table surface area: 230 x 600 mm 5 sanding speeds via stepped pulley drive Electrical connection: 400 V, 0.55 kW Itodpfxezi A Sls Aa Eji

Condition: ready for operation (used), Sanding belt width: 200 mm Ijdpfezi A Rzjx Aa Eoti Sanding belt length: 1500 mm Table surface area: 240 x 460 mm 1 belt speed Electrical connection: 380 V Space requirement: 880 x 550 x 1080 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, grinding diameter 20-35mm X-travel 450mm, Z-travel 200mm Iedpfx Asy Ix Ezja Ejti exhaustion device, extinguishing system weight ca. 4000kg

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: fully functional, operating hours: 40,000 h, grinding height: 130 mm, grinding length: 250 mm, grinding spindle speed: 3,300 rpm, grinding width: 100 mm, table length: 400 mm, table width: 225 mm, Equipment: rotational speed infinitely variable, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is full working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same working condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together. Itjdpowh Udtefx Aa Esi

Condition: used, Year of construction: 1987, grinding length 1250 mm grinding width 400 mm workpiece height 550 mm table surface area 1750 x 500 mm dimensions of grinding wheel 400 x 50 x 127 mm 1250 x 600 mm Itsdpjy Ezz Tsfx Aa Esi grinding spindle speed 3000 U/min table load capacity 1100 kp total power requirement 13,8 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 3,4 x 2,4 m Surface grinding machine - Magnetic grinding wheel - Coolant system - Documentation