Used Extrusion for sale (303)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet Hodpfxjyvhwij Ag Ionl - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: good (used), Year of construction: 2009, Conical Twin-Screw Extruder - Manufacturer: WEBER, retrofitted by INDEXT - Model: CE7 - Year: Retrofitted in 2009, originally built in 1982 - Parallel double screws ø51 to 104mm Hedey Hpm Tjpfx Ag Ionl - 5 heating zones on the barrel + 2 cooling zones - Motor: 38kW - Up to 35 rpm - Up to 250 kg/h depending on material and tooling

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF RA 110 3+3 E 6 CATERPILLAR Year of construction: 2003 Caterpillars: 6 Diameter: Min 20mm Max 170mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany Hnsdop Analspfx Ag Ijl

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port Hnsdoycuuyspfx Ag Iel • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Hjdey A H Umepfx Ag Ijnl Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner Hnsdpfjyrd U Uex Ag Isl - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: reconditioned (used), functionality: fully functional, Stock No.: 2858 1 used, partially overhauled and function-tested compounding and pelletizing line, consisting of: Extruder Berstorff (Krauss Maffei) Type ZE 60 A - 34 L/D twin-screw co-rotating Extruder drive 160 kW AC Degassing with vacuum pump Laser cutting head / melt filter Melt pump Eprotec Melt x10 ECON EUP 600 underwater pelletizer, complete with Hnedpfx Ajy At Iajg Isl start-up valve water system granulate drying centrifuge >> 1 year PLASTICO warranty OPTIONAL for an additional charge: Material conveying system Gravimetric dosing units Granulate classification Pellet filling station for Big Bags or Octabins Additional compounding plants, pelletizing systems, gravimetric dosing units available from our Wuppertal facility. Visit us or send us your enquiry.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer Hnsdpjiyyndofx Ag Iol > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Hodpjd H S U Uefx Ag Ionl Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic pelletizer with motor 4 kW incl. die-plate and knife-holder Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome.

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Hnjdpoiyyf Iefx Ag Iel Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Hsdpfsyr Tg Tjx Ag Ienl Extrusion Waste

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills designed for the fine grinding of nearly all thermoplastic plastics. Typical applications include the fine pulverization of regrind material or virgin material from profile, pipe, or sheet extrusion. Additionally, these mills can be used in the food, chemical, and pharmaceutical industries. Hnedpfx Aoyr I Hheg Isl The material is fed centrally through the stationary grinding disc with a dosing device. Fine grinding takes place between the rotating and stationary grinding discs. Discharge occurs via pneumatic extraction.

Year of construction: 2008, condition: like new (used), functionality: fully functional, Elumatec SLK 118 3-axis CNC profile machining center. Bar processing center with 3 controlled axes; designed for machining aluminum and thin-walled steel profiles and extrusions, as well as aluminum, PVC, and lightly alloyed steel. Especially suitable for companies processing Neher insect screen profiles or those looking to automate their door production. Machining from above; workpiece rotation for processing the opposite side. Technical Data: Travel range X-axis: 2450 mm / max. speed 36 m/min Travel range Y-axis: 350 mm / max. speed 15 m/min Travel range Z-axis: 280 mm / max. speed 15 m/min Hnjdpfx Asyr Ai Deg Iel Spindle speed: 18,000 rpm. 6.5 HP (4.5 kW) motor-driven spindle Minimum quantity cooling system Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89"). Weight: 1,400 kg (3,087 lbs). Equipment: PC touchscreen control with Windows software, 4 material clamps The machine is in exceptionally good condition.

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Hnsdey Abclspfx Ag Iel Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: excellent (used), functionality: fully functional, Side Feeder for Extrusion Lines Hnedpfx Aoyzzrwog Iel Used side feeder in good condition, suitable for the lateral feeding of powder, regranulate, fibers, or other additives into extrusion processes. Robust design, ideal for expanding existing extruder or compounding lines. Inspection possible by appointment.

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. Hsdsw Iu T Tspfx Ag Ijnl • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line includes: • Main Extruder: BA105 AMUT, year of manufacture 2004 • Single-screw Co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 Hnedpsyc R Aaefx Ag Ijl • Raw material pneumatic conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Discharge table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 RPM • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Venting: 2.2 kW pump, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (total 1:25) • Belt type: 3VX600 (4 pcs.) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines are complete and fully operational Ready for profile production using co-extrusion technology Possibility to sell one or both lines, depending on buyer’s requirements On-site inspection available. Documentation and photos provided. It is possible to purchase one line for €80,000.00

Condition: used, functionality: fully functional, Plastic Granulation Line + for Spare Parts The line includes: -Extruder: CINCINNATI MILACRON CM65HP, year of manufacture 1996 -Granulating head -Granulate cooling system -Cyclone: GAMART -Raw material pneumatic conveying system ADDITIONAL EQUIPMENT -Single-screw co-extruders – total of 9 units -Raw material transport: -Pneumatic (powders, granules) -Mechanical (screw conveyors, 2x chain-type redler conveyors) -2 x trough mills – for grinding PVC profiles Hnodpfx Agsyda Egj Iel Technical condition: equipment is fully operational, currently in use in production Applications: -Plastic granulation (PVC, other types) -Co-extrusion Documentation and photos available upon request.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Hjdpfxjyc R U As Ag Ijnl Includes additional spare parts.

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Hnedpjiux Nmefx Ag Isl Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget.

Year of construction: 2000, condition: excellent (used), Category: Twin-screw extruder Number: DE27669 Hnsdsn Nxl Sjpfx Ag Isl Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 40 Year of manufacture: 2000 Capacity: 250 – 450 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Motor: 110 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing with segmented screws and barrels Includes a completely new control cabinet This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Hnsdpfsxu Db Eox Ag Iel

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Hsdpfx Agexykcgo Isnl Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Year of construction: 2012, condition: excellent (used), Category: Twin-screw extruder Number: DE27691 Manufacturer: Feddem Type: DEC 72 MTS Year of manufacture: 2012 Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 72.0 mm L/D: 32D, including housing extension to 42D Drive: 168 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing – 2 side feeders, 6 Schenk gravimetric dosing units, ECON EUP 600 underwater pelletizer, Trendelkamp classifying screen, degassing, vacuum pump, BSG control system Hnedpfxjvk Sgfo Ag Iel Very nice complete system with only approximately 3,500 operating hours. The offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry, we have the right product for almost every budget.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27678 Manufacturer: Leistritz Type: ZSE 27 MAXX Year of manufacture: 2007 Screw diameter: 2 x Ø 27.0 mm L/D: 40D Drive: 33.6 kW Details: Co-rotating, segmented screws and barrels, 1 x atmospheric degassing, 1 x vacuum degassing including vacuum pump Hnsdpfxjt Eqvdj Ag Iol Options: Granulation, dosing, side feeder This offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have the right solution for almost every budget.