Twin-screw extruder

Berstorff ZE 40A X 55D-UTX

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Dedpfx Ajkkiwxol Aoku

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, High-quality meltblown production line for nonwovens On December 17, 2025, a complete machine inspection was carried out by the manufacturer's customer service department. Dodpex Hx Rnefx Al Asku Report available. If interested, we can offer assistance with commissioning at the customer's site. The video shows the line shortly before dismantling. Operating hours: 200 hours (only for commissioning) Price of a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of construction: 2021 • Last commissioning: 2022 Technical data • Working width: 1600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating power of the rotating beam: 65–172 kW • Winding station: Contact winder with pre-set bobbin change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tension: 10–100 N/m Additional equipment and accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Slitting knife • Central control panel with touchscreen and data entry

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Djdpfeh Ad E Hex Al Aoku Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving 📋 Consisting of: • 24 x frames, pre-assembled / approx. 250 cm high / 80 cm deep / new • 92 x shelves / 128 cm long / 80 cm deep / 250 kg load capacity / used • 8 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €4,320 net, excluding VAT. • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment • Product number: P2601 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale, are reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used and new heavy-duty racking Description: Are you looking for high-quality storage racks to buy? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ READILY AVAILABLE: • Over 10,000 linear meters of racking systems available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION Dedped Nf Svofx Al Aoku For dismantling and clearing orders, we offer a real all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and handover in a clean condition. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, New conveyor belt equipped with a metal detector. Dkjdpfx Aljwqrrtj Aju 110 kW motor with frequency inverter, new. Vacuum system with two zones. Erema double-piston screen changer. Die-face cutting system; water cooling; centrifuge; conveying fan. One barrel and two used spare screws

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS Dkedpfx Aewzmcbol Aou In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. Dodpjrxt Axjfx Al Aoku • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Dkedpfx Aszkru Eel Aju Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Dodpfx Aozd Sulsl Aeku

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the fence Dkedpfezq Ez Sjx Al Aju