Used Extruder Sheeter for sale (514)

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Hodpfx Ahsxq Exqo Njng

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock Hnedpfx Ahjhgq Aho Nog

Condition: good (used), Tecna Saima D2 pasta sheeting machine with built in mixer. Produces 300mm pasta sheet. Hnsdpfon Utypex Ah Nsg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Hedpfoxnpx Nsx Ah Nsng

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 Hjdpfx Ahopaiais Neng - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: like new (used), Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile Hedpfx Ajd R D Tlsh Nsng

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Hnsdpfxsxn S Ums Ah Nog

Condition: reconditioned (used), Year of construction: 2010, machine/vehicle number: D0A361109, total width: 2,210 mm, total length: 1,175 mm, total height: 1,380 mm, power: 1.5 kW (2.04 HP), year of last overhaul: 2025, warranty duration: 6 months, overall weight: 350 kg, Rondo Kombi Dough Sheeter SKO 611 Stainless steel model with computer control – the professional dough sheeting machine for your bakery Hnedjk E I Tmspfx Ah Njg The Rondo SKO 611 is a professional stainless steel dough sheeter that combines maximum precision with ease of use. Thanks to modern computer control, programs can be saved and recalled – ideal for croissants, puff pastry, pizza, or bread dough. As a reliable bakery machine, it is distinguished by its hygiene, convenience, durability, and maximum efficiency in the bakery. Used machine – professionally refurbished Stainless steel model 6-month warranty* Features: + Mobile combination dough sheeter + With computer control & LCD/LED display + Suitable for sheeting and laminating all dough types + With automatic flour duster + Equipped with new felt & linen belts as well as new scrapers + All relevant parts have new felt coverings + With drag net & corrugated mat for wrapping dough pieces / rolls / loaves + With lower long-rolling station for all dough types *Excluding: controller / circuit board / display Technical data: Year of manufacture: 2010 Serial no.: D0A361109 Belt width: 635 mm Roller width: 670 mm Roller gap: 0.3 to 45 mm Dimensions: Working position: 2210 x 1175 x 1380 mm (W x D x H) Resting position: 1600 x 1130 x 1700 mm (W x D x H) Electrical connection: 400 V – 50 Hz – 1.5 kW Fuse: 16A CEE plug Upon request and for an additional fee, bak-tec can disassemble and reassemble the machine on site for entry into your bakery.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Hjdpoxlcfksfx Ah Neng Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D Hnjdon Utt Hjpfx Ah Neg * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. Hnjdpfovfd Uqox Ah Njg The extruder is fully functional

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Hodpourvzrefx Ah Njng Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Hnsdjxgh H Aepfx Ah Nog

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Hnjdpfx Aexd D Nnsh Nsg

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Hedpfxsw Tbr Hj Ah Nong Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Hnsdpfeu Itqdjx Ah Njg

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 133846, LDPE extruder, head diameter 150 and 200 mm, screw diameter 55 mm, width up to 1200 mm, 30-180 micron, single winding Hodsxdknqspfx Ah Nsng

Condition: good (used), Agnelli Automatic sheeter Hnedpfx Ahotu N A Tj Neg Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Hjdpfx Aoxgh Dzsh Njng

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 90-30 Hodoxcp T Njpfx Ah Njng Application PVC PIPE The extruder is in very good condition and ready for operation. Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 The extruder is my property

Condition: used, Dough laminator Manufacturer: Seewer Rondo Model: SSO 62 Dimensions: 305x115x120cm Electrical power: 1.1kW Voltage: 380V 50Hz Hjdpfx Ahsw Nw A Tj Njng Tape dimensions: 62x130cm

Condition: new, Year of construction: 2024, functionality: fully functional, New machine 24 months warranty Advantages: + TOP price-performance ratio + Robust, compact table-top sheeter + operation with push buttons Hnsdpfjfthxhjx Ah Nsg + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore also suitable for marzipan and rolled fondant + tables can be folded up on the left and right side + scrapers can be easily removed without tools + machine is equipped as standard with 1 hand reel + can be set up on a table at least 80 cm deep + fast spare parts supply within 1-2 working days Technical data: - belt width: 520 mm - table length: 670 mm each = 1,340 mm - Roller adjustment: from 1 mm to 30 mm (depending on product) - speed: approx. 50 cm/sec - motor power: 0,37 kW - Connection values (you choose the power connection that suits you): --- 230 V - 1Ph - 50Hz --- 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: --- Working position: 1460 x 940 x 550 mm (WxDxH) --- rest position: 800 x 940 x 665 mm (WxDxH) - Net weight: 100 kg

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Hjdpoxghz Hefx Ah Nsng

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Hedpfxexghy Nj Ah Nsng

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Hnodpfx Ahjxghxrj Nog