Used Extruder Screw for sale (5,284)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Bdedpfeycg Rysx Amysf Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, LUFT 1500 Screw Compressor with Inverter is a state-of-the-art solution used in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and durable design, and high efficiency ensure effective and trouble-free operation. The LUFT 1500 INVERTER stands out with its direct drive, which offers significantly better efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM series electronic control panel, giving access to key compressor data and improving flexibility and control over your processes. Bjdjxnxzaspfx Amyodf Technical specifications: Motor power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1170 x 730 x 1020 mm Weight: 243 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Bdjdorh E Erepfx Amysf The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR series, is the most modern solutions used in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee efficient and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision of workmanship. Solid construction, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Bdodpoklz Syofx Amyjf Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 15 kW Voltage 400V/50Hz Efficiency 0-6 bar 2100 l/min Efficiency at 6 bar 2000 l/min Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Outlet 3/4" Dimensions 1080 x 750 x 1000 mm Weight 460 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, LUFT screw compressor represents a modern solution in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. The LUFT 1000 stands out with its direct drive system, which delivers significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output with reduced energy consumption. Bjdoy E Hpcopfx Amyjdf The compressor generates a maximum pressure of 10 bar. Full control over operating parameters is provided by an intuitive electronic control panel from the MAM series, giving access to key compressor data and increasing flexibility and process control. Technical specifications Motor power: 7.5 kW Voltage: 400 V / 50 Hz Air delivery (0–6 bar): 990 L/min Air delivery at 6 bar: 950 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 × 610 × 850 mm Weight: 160 kg

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Bodpfx Amoxnyhujyjdf Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: new, Year of construction: 2026, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders Bedsmqlqdepfx Amyodf THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, LUFT 1000 INVERTER Screw Compressor – Advanced Technology and Energy Efficiency in Pneumatics The LUFT 1000 INVERTER screw compressor combines cutting-edge pneumatic technology with high-quality materials and components. With low operating costs, ease of use, ergonomic and durable design, and high performance, this device guarantees efficient and trouble-free operation in demanding industrial environments. The LUFT 1000 INVERTER stands out with its direct-drive transmission, which offers significantly better efficiency and reduced power loss compared to belt-driven models. This innovative solution ensures optimal use of motor power, resulting in higher output and lower energy consumption. The maximum pressure generated by the compressor is 10 bar. Complete control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving the operator access to all critical system data and ensuring maximum flexibility and process control. Bedsmqlhvopfx Amysdf Key Advantages of the 7.5 kW Induction Motor with Inverter Drive Significant Energy Savings The inverter enables smooth and precise regulation of the motor’s speed. The compressor adjusts its output to the current demand for compressed air, eliminating idle running, frequent start/stop cycles, and energy waste caused by venting excess air. Depending on your facility’s air usage profile, energy savings can range from 25% to even 50%. The more variable the air demand, the greater the potential savings. Stable Air Pressure With continuous speed regulation, the inverter maintains an almost perfectly stable pressure in the compressed air system, regardless of demand fluctuations. This is critical for the correct operation of pneumatic tools and machines, preventing pressure spikes and enhancing process accuracy. Reduced Starting Current and Electrical Load The inverter allows for soft-start motor operation, avoiding high inrush currents that can overload electrical networks and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. Extended Component Lifespan Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and motor. This translates into a longer service life for the compressor and lower maintenance and repair costs. Quieter Operation When operating at reduced speeds (during lower demand), the compressor generates less noise, improving the acoustic comfort in the workplace — a significant benefit for both operators and the surrounding environment. Greater Flexibility and Demand Matching The inverter-driven compressor can efficiently meet a wide range of compressed air requirements, making it an ideal solution for facilities with fluctuating air usage throughout the day, week, or month. Advanced Control and Diagnostics The inverter integrates with modern control panels to offer comprehensive monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and allows for optimization of the compressed air system’s performance. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Bjdpfexnk Acsx Amysdf Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Bsdpfx Asychbaemysdf Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. Bodpsycg I Sefx Amyjdf 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g Bdjdpfjyguq Ajx Amyjf 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! Bdsdpfx Aoyguiromysf The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Bedpfoxa Ah Uex Amyodf Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Condition: new, Year of construction: 2026, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer Bedpfx Aemqlm Tjmyedf 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Bjdsrh E Dispfx Amysdf Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, working height: 800 mm, input voltage: 400 V, overall weight: 800 kg, type of input current: three-phase, Manual Lisec butyl application machine LBH-25V, year 1989, fully functional, capacity of butyl storage cylinder 2 x 7,5 kg cartridge butyl application of spacer width 6-24 mm Bodpfx Amszn Np Ijyedf availabe from our stock in Hofkirchen/Austria

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Bdjdpfx Aoxnpx Nemyef

Condition: excellent (used), Year of construction: 2006, operating hours: 22,796 h, functionality: fully functional, empty load weight: 180 kg, For sale: a complete compressed air station consisting of: ATMOS E120V screw compressor MARK MDX 2400 refrigeration dryer ATMOS ALBERT E100 Vario compressed air tank Compressor technical specifications: Manufacturer: ATMOS Model: E120V Year of manufacture: 2006 Engine power: 13 kW Bdedpfx Ajzn Apzjmysf Maximum pressure: 9 bar Capacity: 0.9–2.0 m³/min Power supply: 400 V / 50 Hz Operating hours: 22,796 hours Weight: 180 kg Dryer: MARK MDX 2400 Year of manufacture: 2006 Included: ATMOS ALBERT E100 Vario compressed air tank Complete set, ready for connection and operation Advantages: Low operating hours for a screw compressor. Complete set: compressor + dryer + tank. Ideal for workshops, production facilities, CNC centers, and service companies. The device can be inspected before purchase. Location: Wadowice, Poland

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Bjdpfxoznz Ezo Amyedf Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: ITRO377736, power: 4 kW (5.44 HP), operating pressure: 11 bar, type of cooling: air, Equipment: type plate available, The ABAC B4900 /LN/ 270 FT4 compressor is a robust and high-performance model, ideal for various demanding industrial applications. This oil-lubricated compressor is capable of producing a maximum pressure of 11 bar, making it suitable for many uses requiring sustained power. With a motor power of 4 kW, it guarantees energy efficiency while delivering good compression performance. This model is designed for long-term use and is perfect for workshops or production sites where a constant and reliable supply of compressed air is essential. Thanks to its robust structure, the B4900 can withstand intensive use while maintaining optimal performance. It is a durable and cost-effective solution for those seeking both power and reliability in industrial equipment. Bdsdpfxozlxxmj Amyof The ABAC B4900 compressor is an excellent option for those looking for a quality compressor, both for professional use and for more specific tasks. Its used condition does not affect its capabilities, making it a wise investment for companies looking to optimize their operations without compromising performance.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: VD004489, power: 45 kW (61.18 HP), operating pressure: 10 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Hertz Frecon Plus 45 compressor is a high-performance industrial unit designed to meet demanding compressed air requirements. This used model offers a power output of 45 kW and operates at a maximum pressure of 10 bar, making it ideal for various industrial environments requiring a reliable compressed air supply. This oil-lubricated compressor is known for its robustness and efficiency, ensuring a long service life and minimal maintenance. The Frecon Plus series from Hertz was designed to optimize energy performance while reducing operating costs. This makes it not only economical in the long term but also environmentally friendly thanks to its energy efficiency. Bdodpfx Ajzlxq Ajmyef Overall, the Hertz Frecon Plus 45 is a reliable choice for those seeking a used compressor capable of delivering consistent power and efficiency. Its robust design and operational capabilities make it a valuable asset for any industrial facility requiring a high-performance compressed air solution.

Condition: used, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Bdjdpfjzdqz Dsx Amyef Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: excellent (used), BOGE S15 screw compressor, serviced Bdsdpfx Ameyfpf Eeyef Technical data: Capacity: 1.45 m3/min (1450 L/min); Engine power: 11 kW; Maximum pressure: 10 bar; Year: 2003 Operating hours: 11320 h; Net price: 6200 PLN Gross price: 7626 PLN

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 15 pieces available Ball screw drive Dm50, stroke 400 Bodpfozluamex Amysdf PITCH 30MM 13:79 675/11 00000 STEINMEYER