Used Extruder Screw for sale (5,344)

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Bodpedrc Txofx Amyolk Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: Bedpfx Ajdtm Ndsmyslk 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Bsdpfx Amjity Eceyslk Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2016, operating hours: 6,210 h, condition: like new (used), machine/vehicle number: MA0084_S0040858, used ALMIG FLEX 7 variable screw compressor with dryer Year: 2016 Hours: 6210 h (new service by 6210 hours) The compressor is on stock, available immediately. type: FLEX 7 effective volume flow min/max (acc. to ISO 1217 / Annex C) 5 bar: 0,55 - 1,32 m³/min 6 bar: 0,54 - 1,25 m³/min 8 bar: 0,53 - 1,11 m³/min 10 bar: 0,52 - 0,97 m³/min 13 bar: 0,52 - 0,76 m³/min Bodpfsglz U Dsx Amyelk compressed air outlet: G 3/4" dimensions ( l x w x h ) 870 x 590 x 990 mm weight: 165 kg Visit our store ! We have a lot of new and used compressors on stock !

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Bledpfx Amszh Hwioyek Visit our store. We always have a large selection of new and used compressors in stock!

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Blodpfx Ajv Rbvcsmysk Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled Bljdpfozpxx Iox Amyjk durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors. Bledpfjzpxnvex Amyok

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Blodpfjzpxhijx Amyjk Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2012, operating hours: 36,734 h, Atlas Copco GA55FF screw compressor Integrated dryer 55 kW 9.80 bar 8.87 m3/min Year of manufacture: 2012 Bedpezphrwsfx Amyslk Operating hours: 36,734

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Blsdpfx Amezphf Dsyok Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: good (used), Year of construction: 2018, 2 spiral conveyors, ambaflex, – used – Price per unit ex works (net): only €8,500 for self-disassembly! Manufacturer: ambaflex Year of manufacture: 2018 Type: SPIRALVEYOR SV Serial number: e.g.: 26811-01 The respective conveying height will be provided later. Diameter and width of the link chains will be provided later! Condition: good Available: from approximately August 2026, or by agreement Bledpfezpf Ntjx Amyek Location: Erfurt area Two spiral conveyors were installed for the conveying system to transport the cartons from the goods receiving area to the 1st floor and to return them to the ground floor after the packing process. One spiral conveyor is used for the vertical transport of cartons and containers. The spiral conveyor can be used both for the vertical transport of the conveyed goods to another level and as a buffer within the system.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 280 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 60 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 7.5 kW / 10 bar (also available as a 4 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure tank refrigerant dryer Blsdpfx Amszpfwweyjk fine filter New machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. Highly efficient, permanent magnet servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 280 kg Pressure: 10 bar Flow rate: approx. 0.9 m³/min at 10 bar Noise level: 60 ± 2 dB(A)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Blsdpfxjy Ecuze Amyek Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: RMZY Series (20 Bar Version) Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Bedpfjy Ecu Ujx Amyelk Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2023, feed pressure 11 bar liter capacity 727 l/min Bljdpfx Amezpbi Neyok total power requirement 4,4 kW weight of the machine ca. 170 kg

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD S/N AIF072891 YEAR 2001 Bsdpfxszq An Nj Amyjlk POWER (kW) 181 OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Bodszq Amropfx Amyolk Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 Blsdjzq Aluopfx Amyjk YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED

Condition: excellent (used), Year of construction: 2001, PROD. ATLASCOPCO TYPE GA160 S/N AIF072890 YEAR 2001 POWER (kW) 167 CAPACITY (m3/min) 21 PRESSURE (bar) 8.5 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no Bedpfx Amjzq Afueyolk COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 3 NEW/USED USED

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Bledpfxodcmdls Amysk Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: used, Year of construction: 2024, overall weight: 205 kg, total length: 1,180 mm, total width: 600 mm, total height: 1,470 mm, pressure (max.): 10 bar, noise level: 67 dB, Air delivery (at 10 bar): 1000 l/min Rated power: 7.5 kW Air receiver tank: 270 L Noise level: 67 dB(A) Dimensions (L x W x H): 118 x 60 x 147 cm Bedpfx Ajzqvwwsmyslk Weight: 205 kg

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. Bledoybvkajpfx Amyjk The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Bedpfxjycctqe Amyolk Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Engine power 3.0 kW / 4 HP Bledpfx Aotz S H Nsmysk Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak