Used Extraction Fan for sale (6,895)

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Djdsh D If Hopfx Ah Nouu Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Dsdpfobumr Ssx Ah Nouu Filter surface: 1 m2 Weight: 175 kg

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Dujdpfsy Dc R Tsx Ah Neu Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Duodpfodqzcvjx Ah Neu Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Dujdpfx Ahshk S Sts Neu Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Dujdpfehk S Swex Ah Nou Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately - Djdpfx Ahehkztte Nsuu

Condition: used, mileage: 545,407 km, power: 355 kW (482.67 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 14 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN with Fassi F135 A2.22 Building Materials Crane VIN: G207799 Chassis / Attachments: * Full air suspension * Lifting axle Dodpowwyd Rjfx Ah Neuu * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 315/80 R22.5 * Tyre tread remaining: Front approx. 80/80%, Middle approx. 80%, Rear approx. 60% * 1 x Aluminium tank 620 l * 1 x AdBlue tank * 1 x Hydraulic oil tank * 1 x PVC toolbox * 1 x Stainless steel toolbox * Fixed trailer coupling * Duomat + 2 ladders Superstructure: * Reichert body BP6500K-H * Fassi F135 A2.22 building materials crane with top seat * 2 extensions * 2 rear outriggers * Drop sides 0.80 m * Body dimensions: 6.45 m x 2.48 m x 0.80 m * Lashing rings * Aluminium floor * Pallet fork, 360° rotatable Cab / Driver’s compartment: * 2 bunks * Roof hatch * Automatic climate control * Auxiliary heating * Navigation system * Hands-free kit * CD radio with USB / AUX / BT * CB radio Engine / Transmission: * 355 kW // 12,902 cm³ // Euro 6 c * Automatic transmission * ZF intarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Payload: 11,520 kg * Unladen weight: 14,480 kg Miscellaneous: * German vehicle * 1 previous owner ---- New general inspection / safety inspection or gross weight downgrading/upgrading on request. We’re also happy to assist you in obtaining export/temporary license plates, and can arrange transport of your purchased vehicle within Germany. Get in touch with us! ---- We speak: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, changes, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With years of experience in reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in selling new and used commercial vehicles. On 11,000 m², you’ll find a large selection of vehicles. Our company philosophy is based on fairness and professionalism. Customer satisfaction is our top priority, so we offer a comprehensive all-in-one service package and provide you a dedicated contact person who will guide you through the buying or selling process. See for yourself! Our services for you: Vehicle loading We’re happy to assist in loading your purchased vehicles. Organizing special transports We’re happy to help organize special transport for you. Temporary/export license plates We’re happy to assist in obtaining export or short-term plates. Customs formalities We’re happy to assist with customs procedures.

Condition: used, mileage: 545,407 km, power: 355 kW (482.67 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 14 m³, loading space length: 6,450 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN with Fassi F135 A2.22 Building Material Crane VIN: G207799 Chassis / Attachments: * Full air suspension * Lifting axle * Wheelbase: 4,800 mm / 1,400 mm * Tyres: 315/80 R22.5 * Remaining tread depth: F.~80/80% M.~80% R.~60% Duodpfx Ahjwwydwe Nsu * 1 x Aluminum tank 620 l * 1 x AdBlue tank * 1 x Hydraulic tank * 1 x PVC toolbox * 1 x Stainless steel toolbox * Fixed trailer coupling * Duomat + 2 ladders Bodywork: * Reichert body BP6500K-H * Fassi F135 A2.22 building material crane with high seat * 2x extensions * 2 rear support legs * Drop sides 0.80 m * Body dimensions: 6.45 m x 2.48 m x 0.80 m * Lashing eyes * Aluminum floor * Rotatable pallet fork 360° Cab / Driver's Cab: * 2 bunks * Roof hatch * Automatic climate control * Auxiliary heating * Navigation system * Hands-free equipment * CD radio with USB / AUX / Bluetooth * CB radio Engine / Transmission: * 355 kW // 12,902 cm³ // Euro 6 c * Automatic transmission * ZF-Intarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Payload: 11,520 kg * Unladen weight: 14,480 kg Miscellaneous: * German vehicle * 1 previous owner ---- New main inspections / safety checks or weight downgrades/upgrades are available on request. We are happy to assist you in obtaining export/transfer number plates, as well as transferring your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for print & typographical errors, changes, prior sale, and errors excepted! --- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength lies in the sale of new and used commercial vehicles. On an area of 11,000 sqm, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. As customer satisfaction is our highest priority, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them during the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to assist you with the loading of your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Day registration/export number plates We are happy to assist you in obtaining export/short-term number plates. Handling customs formalities We are happy to assist you with customs matters.

Condition: used, mileage: 551,066 km, power: 320 kW (435.08 HP), first registration: 06/2016, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Leasing or hire purchase available, subject to a credit check. We are happy to provide you with an offer, including for business start-ups. CF 440 FAN ADR: FL, OX, AT, EXII, EXIII Engine, Transmission: * Engine: MX-11, 320 kW, 10,837 cc, Euro 6 * Transmission: 12A2130, automatic Assistance systems: * MX Engine Brake * Differential lock * Cruise control Dsdpoy A Uv Ejfx Ah Nsuu * Lane assist * Distance control * Hill holder (hill start assist) Chassis, Equipment: * Axle configuration: 6 x 2 *4 * Rear trailing axle steerable and liftable * Wheelbase 4,200 mm + * Leaf/air suspension * Front axle 8,000 kg * 1 aluminum tank 335 l * Ringfeder coupling * DuoMatic * Electric battery master switch * AdBlue * Power take-off (PTO) Tyres: * Size: 385/65 (see photos for condition) * Alloy rims Superstructure: * Chassis Cab: * CF * Air conditioning * Auxiliary heating (parking heater) * Electric and heated mirrors * Electric windows * Air-suspended and heated driver’s seat * Fixed co-driver seat * 1 bunk * Cool box * Roof hatch * Central locking with remote control * Sun visor * Fog lights * Radio Vehicle No.: 6897 Sale only to commercial customers or for export. All prices are net plus VAT or for export. Details without guarantee. PARLIAMO ITALIANO, GOWORIM PO RUSSKI, DOMLUVIME SE CESKY, WE SPEAK ENGLISH

Condition: used, mileage: 318,208 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 118 m³, loading space length: 7,450 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN LowDeck 6x2 | Jumbo Combination | Excellent Condition | Only sold as a package with trailer! - 3rd axle steerable - Very clean condition - Available only as a complete combination - Trailer (Listing no. 9807) plus €17,000 net - Total price: €80,000 net - Very well maintained, immediately ready for operation - Truck-mounted forklift available at extra cost Dusdpfxew E Uf Sj Ah Nsu * FBL Jumbo tautliner body, galvanized * 7,450 x 2,550 x 2,900 mm * Super Space Cab * Sky lights * Fully air-suspended * ZF intarder * Auxiliary air-conditioning * Roof light bar with LED * LED headlights * 900 L aluminum tank (450 left/450 right) * Low coupling * Lashing rail on outer frame * Sliding roof * Mechanical lifting roof 400 mm, left & right * Through-loading rear doors * Tires: 315/60 R 22.5 * 3rd axle steerable Tandem trailer - Vehicle number: 9807 For further information, we are at your disposal.

Condition: used, mileage: 318,208 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 118 m³, loading space length: 7,450 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN LowDeck 6x2 | Jumbo Combination | Excellent Condition | Only available as a set with trailer! Duodpfxew E Abbs Ah Nju 3rd axle steerable - Very clean condition - Only available as a complete unit - Trailer (Listing No. 9807) plus €17,000 net - Total price: €80,000 net - Very well maintained – immediately ready for operation - Truck-mounted forklift available at extra cost * FBL Jumbo Tautliner body, galvanized * 7,450 x 2,550 x 2,900 mm * Super Space Cab driver’s cabin * Sky lights * Full air suspension * ZF Intarder * Stationary air conditioning * Roof light bar with LED * LED headlights * 900 L aluminum tank (450 left / 450 right) * Low coupling * Lashing profile in outer frame * Sliding roof * Mechanical lifting roof 400 mm left and right * Through-loading rear doors * Tires: 315/60 R 22.5 * 3rd axle steerable Tandem Trailer – Vehicle Number: 9807 For further information, we are happy to assist you.

Condition: used, power: 353 kW (479.95 HP), first registration: 12/2025, fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, PRIVATE NEGOTIATION Equipment: Removable body (scarrabile) CBS configuration with Multilift Ultima 21Z.65 Flex hooklift, suitable for swap bodies up to 7 meters in length. Vehicle available at our Calcinato location: Djdpfxoxa Igij Ah Nsuu Via Statale, 98 - 25011 Calcinato (BS), Italy Email: info. Phone: We accept trade-ins of any vehicle, subject to appraisal. Financing or leasing options available for any amount according to customer needs. We are EXPERTS in remote transactions and offer you the best solution for purchasing our vehicles even if you live far from the Province of Bergamo. We invite you to verify the specifications of the listed vehicle. Lodotruck s.r.l. accepts no liability for any unintentional discrepancies in the advertisement description. If you are interested in the vehicle, please reply to the ad including your city and phone number. In case of a trade-in, please specify: make, model, color, month and year of registration, mileage, main features/accessories, transmission, kW/HP, and the general condition of the vehicle (preferably with attached photos). Providing this information will allow us to respond more quickly. CUSTOMER SERVICE OPENING HOURS: Monday-Friday: 8:30 am - 12:30 pm / 2:00 pm - 6:30 pm Saturday: 8:30 am - 12:30 pm

Condition: used, mileage: 464,839 km, power: 355 kW (482.67 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 10,280 kg, maximum load weight: 15,720 kg, overall weight: 26,000 kg, axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, trailer coupling, Unladen weight: 10,280 kg, gross permitted weight: 26,000 kg, fabric seats, interior color white, air suspension, steered lift axle, intarder, digital tachograph, BDF swap body system, Electronic Braking System (EBS), Electronic Stability Program (ESP), stationary air conditioning, Adaptive Cruise Control (ACC), comfort seats, air-suspended driver’s seat, armrest driver/passenger, seat heating, LED headlights, radio, audio interface, lane keeping assist, leather steering wheel, power steering, electric windows, outside temperature display, electric external mirrors, kerb mirror, wide-angle mirror, tire pressure monitoring system, central locking, underrun protection, sun visor, self-steering axle, refrigerator box, hill start assist, daytime running lights, cup holder, information and service system, speed limiter, emergency brake assist, storage box, upper and lower bed, vehicle location: 01471 Radeburg. Errors and changes excepted. Dusdpjyx R Nyofx Ah Nsu

Condition: used, mileage: 545,785 km, power: 355 kW (482.67 HP), first registration: 11/2021, fuel type: diesel, empty load weight: 10,280 kg, maximum load weight: 15,720 kg, overall weight: 26,000 kg, axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, trailer coupling, Unladen weight: 10,280 kg, permissible total weight: 26,000 kg, fabric seats, interior color white, air suspension, steered lift axle, retarder, digital tachograph, BDF swap body frame, Electronic Braking System (EBS), Electronic Stability Program (ESP), stationary air conditioning, Adaptive Cruise Control (ACC), comfort seats, air-suspended driver's seat, driver's/passenger's armrest, seat heating, LED headlights, radio, audio interface, lane departure warning system, leather steering wheel, power steering, electric windows, outside temperature display, electrically adjustable exterior mirrors, kerb mirror, wide-angle mirror, tire pressure monitoring system, central locking, underrun protection, sun visor, trailing axle steering, refrigerator box, hill start assist, daytime running lights, cup holder, information and service system, speed limiter, emergency braking assistant, storage box, upper and lower bunk, vehicle location 01471 Radeburg. Subject to errors and change. Duodsyx R Ntepfx Ah Nsu

Condition: used, mileage: 504,913 km, power: 355 kW (482.67 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 10,800 kg, maximum load weight: 15,200 kg, overall weight: 26,000 kg, tire size: 315/70 R22,5, axle configuration: 6x2, wheelbase: 5,050 mm, next inspection (TÜV): 12/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, trailer coupling, Color: E1980WHTE Crystal White, Bodybuilder: SDG, Unladen weight: 10,800 kg, Permissible total weight: 26,000 kg, Tire size: 315/70 R22.5, 1st axle: , 2nd axle: , 3rd axle: , Fabric seats, air suspension, retarder, digital tachograph: VDO1c G2V2, Trailer coupling: 2x, BDF interchangeable frame: SDG 1120mm / 1320mm / C715-C782, Electronic brake system (EBS), brake assist, Adaptive Cruise Control (ACC) with Predictive Cruise Control (PCC), Air-suspended driver's seat, seat heating, LED headlights, radio, audio interface, sound system, lane departure warning system, power steering, adjustable steering column, electric windows, roof hatch, fog lights, electric exterior mirrors, curb mirror, tire pressure monitoring, central locking, sun visor, steered trailing axle: lift & steerable trailing axle, cool box and refrigerator, axle load display, work lights, ambient lighting, hill start assist, cup holder, cornering light, mirror package, turn assist system, information and service system, upper and lower bed, suspended cab, ex-rental vehicle, vehicle location: 90518 Altdorf near Nuremberg. Errors and changes excepted. Dodpfsy Ela Hjx Ah Njuu

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% Duedpfx Asyq Nl Njh Nou - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction Dujdpfx Ajl Dw U Dsh Nju is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" Dusdpfx Aheib Dads Neu The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. Dsdohm E S Ajpfx Ah Njuu The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: used, mileage: 992,000 km, power: 375 kW (509.86 HP), first registration: 07/2015, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2026, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Information in English: DAF XF 510 - FAN SALES UNIT - FULL AIR SUSPENSION - THROUGH-LOAD SYSTEM - SPECIAL CABIN HEATER - DHOLLANDIA TAILGATE Body: Insulated flower transport van, Van Beurden Kerkdriel Date of first registration: TÜV (technical inspection) valid until: ? 2026 Tacho (tachograph) valid until: 12 - 2026 Mileage: 992,000 km Engine power: 375 kW (510 hp) Transmission: Automatic Internal dimensions (L x W x H): 830 x 250 x 280 cm External dimensions (L x W x H): 16 x 260 x 400 cm Wheelbase: 670 cm Unladen weight: 14,055 kg Payload: 12,945 kg Permissible total weight: 27,000 kg Color: Green Suspension: Air suspension (front), Air suspension (rear) Emission class: EURO 6A Axle configuration: 6x2 Front axle tires: 385/55 R22.5 L40% R40% Drive axle tires: 315/70 R22.5 L40% R40% Trailing axle tires: 385/55 R22.5 L30% R30% Tail lift: Dhollandia 1,500 kg under-ride guard lift Heating: Hot air heater Cab type: Sleeper cab Extras: Special interior design by Royal Class, London system (cameras and sensors), air conditioning, full air suspension, luxury seats, radio/CD player, roof spoiler and fender extensions, fully insulated Van Beurden Kerkdriel cargo box, side door with folding steps, hot air heater with temperature display in the cab, 4x floor/ceiling rails, 1,500 kg Dhollandia under-ride guard tailgate, trailer coupling, steered rear axle, refrigerator, Smart Tachograph 2, various cameras, etc., etc., etc. Can be delivered with: 2-AXLE FLOOR TRAILER - VAN BEURDEN KERKDRIEL BODY - DHOLLANDIA TAIL LIFT Body: Insulated flower transport van, Van Beurden Kerkdriel Date of first registration: - TÜV (technical inspection) valid until: ? 2026 Internal dimensions (L x W x H): 760 x 250 x 267 cm External dimensions (L x W x H): 981 x 260 x 400 cm Wheelbase: 181 cm Unladen weight: 7,670 kg Payload: 8,330 kg Permissible total weight: 16,000 kg Color: Silver Suspension: Air Brakes: Drum brakes Axle configuration: 2 axles Tire axle 1: 275/70 R22.5 L20% R20% Tire axle 2: 275/70 R22.5 L20% R20% Tail lift: Dhollandia 1,500 kg under-ride guard lift IMMEDIATELY AVAILABLE AND READY FOR USE! Further information: * Payload: 13,045 kg * Type | First axle: Continental R * Tire size | First axle: 385/55 rf22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 8,000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth outer left | Second axle: 40% * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth outer right | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 11,500 kg * Maximum axle load | Third axle: 7,500 kg * Wheelbase: 670 cm Dujdpfxozb T Ezo Ah Neu * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 1,498 kg * Price on request: Yes * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Steering | Third axle: Yes * Differential lock | Second axle: Yes

Condition: used, mileage: 352,000 km, power: 330 kW (448.67 HP), first registration: 01/2018, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, tail-lift, Information in English: DAF CF 450 Fan 6x2 Heiwo, flatbed, 3,000 kg capacity, valve, excellent condition. Design: Fully insulated. HEIWO 28 Date of first registration: TÜV (German technical inspection) valid until: 11/2026 Mileage: 352,000 km Engine power: 330 kW (450 hp), 11-liter 6-cylinder engine Transmission: Automatic Dimensions (L x W x H): 875 x 250 x 275 cm (internal) Unladen weight: 13,710 kg Payload: 14,290 kg Permissible total weight: 28,000 kg Color: White Suspension: Front axle parabolic, axle 2 air-sprung, axle 3 air-sprung Emission class: Euro 6 Axle configuration: 6x2 Steering axle: Yes, 1 and 3, the last axle can also be raised Front tires: 385/65 R22.5 L30% R30% Tires axle 2: 295/80 R22.5 L90% R90% Tires axle 3: 385/65 R22.5 L50% R50% Tail lift: Dhollandia 3,000 kg, rear tailgate Cooling: Carrier Supra Next service due after: 75,000 km, just recently serviced Cab type: Space Cab Additional features: High-performance engine brake, Euro 6, 9-ton front axle, steerable and liftable trailing axle, air conditioning, auxiliary heater, Carrier cooling unit, cooling operated via diesel engine and 380 V socket, 3,000 kg rear tailgate with operation from the cab, Orlaco front and rear cameras, 5 floor/roof rails, 3 impact protection plates on the body, stainless steel rear portal, separate batteries for the body, 620-liter aluminum diesel tank, adaptive cruise control, radio/CD player, various additional lights, 6 reversing lights, complete maintenance history at DAF, recently serviced and new inspection/MOT, truck always had a service contract, robust Heiwo body in flawless condition, pintle hook and light and air connections for tipper trailer/trailer. VERY NICE BOX TRUCK TECHNICALLY AND OPTICALLY IN EXCELLENT CONDITION COMPLETE MAINTENANCE HISTORY AT DAF NEW INSPECTION, INSPECTION AND SERVICE Further information: * Payload: 14290 kg * Maximum axle load | First axle: 9000 kg * Maximum axle load | Second axle: 11500 kg * Maximum axle load | Third axle: 7500 kg * Wheelbase: 700 cm * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 3000 kg * Price on request: Yes * Lift axle | Third axle: Yes * Driven | Second axle: Yes * Tail lift | Type: Closing tailgate * Position | First axle: Front * Position | Second axle: Rear * Position | Third axle: Rear Additional equipment: * 9-ton front axle * 27 MC / CB * Adaptive cruise control * Aluminum fuel tank Dusdpfxezb T Eno Ah Nju * Trailer coupling * Anti-lock braking system (ABS) * Traction control * Apple CarPlay * Automatic transmission * Automatic climate control * Brake booster * Camera connection for camera on trailer * DAB radio * Roof spoiler * Differential lock * Electric windows * Electrically adjustable mirrors * Electronic braking system (EBS) * Speed limiter * Cruise control * Homepage * Cab * Camera * Air conditioning * Refrigerator * Steering axle * Air suspension * Navigation system * Fog lights * Parabolic suspension * Particle filter * Radio/CD player * Rear view camera * Disc brakes * Sunroof * Sleeper cab * SemCollection * SemStars * Sun visor * Spoiler * Auxiliary heater * Tool box * Central lubrication system * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder RL-140 automatic clean air extraction unit with a maximum air flow rate of 2500 m³/h. The extraction unit has been inspected and refurbished by our service team and is in very good condition. Technical data: - Max. air flow rate 2500 m³/h - H3 dust-tested - Automatic filter cleaning - 10 m³ filter area - Extraction port diameter 140 mm - Motor power 3 kW / 4.1 HP Dsdpfoza Dz Rjx Ah Neuu - Year of manufacture 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-T03VW

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Dedpfx Aeyym A Ssh Neuu

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16001522, overall weight: 1,500 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,000 mm, total height: 2,000 mm, volume flow: 4,500 m³/h, power: 4 kW (5.44 HP), input frequency: 50 Hz, input current: 9 A, ESTA MOBEX P-36 extraction system Dedpfx Ahjy Dcxkj Nouu Attention: The item must be collected without fail between 07 and 09 July 2026 on a date to be mutually agreed. FCA D-71263 Weil der Stadt – loaded onto truck