Used Control Cabinet Fan for sale (49,838)

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Codpfxj Agw Ene Aatjhd Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: used, Several control cabinets with frequency inverters ranging from 37 kW to 45 kW are for sale, in various designs and from different manufacturers. Details: Item No. Sch 6 Control cabinet with 37 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 15 Control cabinet with 37 kW Siemens S5 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S5 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 45 Control cabinet with 45 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Cjdpfx Asztl N Ieatjhd Power: 45 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No.: Sch 47 Siemens S5 control cabinet, Siemens Operator Panel OP393-III ✔️ Ideal as a distribution cabinet or for individual configuration ✔️ With control elements (buttons, emergency stop, display) ✔️ Robust industrial design ✔️ Perfect for modification, expansion, or replacement With Siemens S5 controllers With star-delta circuit for 45 kW With Siemens Operator Panel OP393-III Stock: 1 Available: immediately Condition: Used, good condition (see pictures). Electrical function not tested (or to be adapted). Scope of delivery: Control cabinet as shown Control elements / installed components

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Codeynwxxspfx Aatehd Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Chsdpfx Aszdqp Ieated Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Available quantity: 5 units Functionality tested; item originates from the dismantling of equipment from an automotive supplier. Manufacturer: Rittal GmbH & Co. KG Model: SK 3304540 Csdpfx Aezgf H Toatehd Type: TopTherm Blue e wall-mounted cooling unit Cooling capacity: 0.3 – 4.0 kW Voltage: 230 V AC Energy efficiency: Blue e technology with EC fans Mounting: Wall-mounted Function: Control cabinet cooling for temperature stabilization Refrigerant: R134a

Condition: used, Consists of control cabinet Cjdpfxj Ahk N Ue Aatshd No. 1- 1-3 No. 2 - 4-6 No. 3 - 7

Condition: used, REGATRON Programmable DC power supply / Industrial power supply unit REGATRON TopCon Quadro 3 × 32 kW – total 96 kW rated power – 0–400 V DC – 0–100 A per unit For sale is a used industrial DC power supply system with three programmable REGATRON TopCon Quadro DC power supply units in an industrial control cabinet. The system is suitable for industrial testing and measurement applications, development, research, and the supply of electrical loads. Technical data: Manufacturer of power supply units: REGATRON AG Series: TopCon Quadro Type: TC.P.32.400.400.S.HMI Unit type: Programmable DC power supply Number of power supply units: 3 Year of manufacture of control cabinet system: 2016 (according to nameplate) Electrical data per power supply unit: Rated power: 32 kW DC output voltage: 0–400 V DC output current: 0–100 A Mains connection: 3 × 400 V AC Mains frequency: 48–62 Hz Input current according to nameplate: 3 × 60 A Total equipment: 3 × REGATRON TopCon Quadro power supply units Installed rated power: 3 × 32 kW = 96 kW Chsdpfx Aae Ad Ia Istsd The actual available total power and output configuration depend on the existing wiring and parameterization. A combined 96 kW output configuration has not been verified. Control and regulation: Programmable output voltage Programmable output current Power regulation Constant voltage operation (CV) Constant current operation (CC) Constant power operation (CP) HMI control panels with LCD displays Rotary and control buttons RS232 interface according to data sheet Status and error indicators Equipment: Industrial control cabinet 3 × REGATRON TopCon Quadro DC power supply units Main switch Electrical protection and switching elements Internal wiring and connection components Fan cooling RITTAL power socket strip KEMET components in the control cabinet Lifting points / transport eyes Other installed components as shown in the pictures Application areas: Industrial test benches Electrical load and supply tests Research and development Power electronics Laboratory and test systems Industrial DC power supply Scope of supply: 1 × Industrial control cabinet with 3 × REGATRON TopCon Quadro TC.P.32.400.400.S.HMI Integrated electrical installation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Dimensions and weight: Per REGATRON power supply unit (H × W × D): 400 × 483 × 525 mm (housing, without connections) Weight per power supply unit: approx. 64 kg according to data sheet Weight of the three power supply units together: approx. 192 kg External dimensions of the entire control cabinet: not determined Total weight of the system including the control cabinet: not determined Collection or shipping by forwarding agent possible after consultation. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, functionality: fully functional, Available quantity: 4 units Cjdjzhnv Tepfx Aatehd “Functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Rittal GmbH & Co. KG Model: SK 3383500 Type: TopTherm Blue e roof-mounted cooling unit Total cooling capacity: 0.50 – 4.00 kW Energy efficiency: Blue e technology with EC fans Voltage: 230 V AC Control: Electronic thermostat and touch display Mounting: Control cabinet roof mounting Function: Temperature control for industrial control cabinets Refrigerant: R134a

Condition: used, Year of construction: 2002, Motan CS S7 315 DP (2002) Full Control Cabinet (Komplet or for spare parts) Motan Central Control Cabinet CS S7 315 DP with Siemens S7-300 PLC & OP7 Panel Motan industrial control cabinet (Type CS S7 315 DP) previously used for central plastic drying/conveying system control. Fully equipped with Siemens SIMATIC S7-300 PLC components and operator panel. Ideal as a replacement unit Csdpj Ah Hv Tsfx Aatehd or for industrial spare parts. Key Technical Components Included: 1. PLC CPU: Siemens SIMATIC S7-300 CPU 315-2 DP (6ES7315-2AH14-0AB0) 2. Operator Panel: Siemens SIMATIC OP7-DP (6AV3 607-1JC20-0AX1) 3. Power Supply: Siemens SITOP power 10 (24V DC / 10A, 6EP1434-2BA00) 4. Cabinet Manufacturer: Motan GmbH (Project No.: 02P001282) 5. Standards Compliance: Tested according to DIN EN 60204 (VDE 0113)

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: Yes Empty weight: 35 kg Dimensions of cargo space: 51 x 20 x 85 cm Cedpfxjyaf Sqo Aatehd Serial number: 9305082 Please contact Team DPX for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available

Condition: used, Year of construction: 2016, total width: 1,000 mm, total height: 1,200 mm, Control Cabinet/Electrical Control Cabinet/Conveyor Technology Manufacturer: RBS Förderanlagen GmbH Year of manufacture: 2016 Condition: used Model: Schaltschrank-Rittal Overall height: approx. 1200 mm Overall width: approx. 1000 mm Overall depth: approx. 300 mm Total height including feet: approx. 2000 mm The conveyor system was operational until disassembly. Thanks to the high-quality workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with an individual quotation or advise you on design or installation questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully realized projects for companies in various sectors such as logistics, pharmaceutical industry, skilled trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flows in a cost-effective and sustainable manner. We can also offer fully automatic sorting systems or additional components such as order picking racks or containers. Csdpfx Aasxw N S Ustshd Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Chodpfx Aeynwx Sjatsd Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2024, overall weight: 140 kg, total length: 1,200 mm, total height: 2,000 mm, total width: 600 mm, Control cabinet, switchgear cabinet, expansion cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX Y352.222 Rittal two-door cabinet with integrated lighting cabinet dimensions: 1200 x 600 x h-2000 weight - 140 kg Chsdpfozfhh Rex Aatjd Cabinet is like new / never used.

Condition: new, Areva Teleperm XS Control System Cabinet, Electrical Cabinet Standard Design For the construction of Teleperm XS systems, control system cabinets of the type SC 9422 (2200 x 900 x 400 mm deep), IP30 protection rating, are typically used. The cabinet is equipped with cable glands and a shielding busbar. The cabinet is designed to withstand seismic loads. Cable entry and power supply are generally located at the bottom. In the standard cabinet, the module carriers are mounted in the middle area. To the left and right of this, there are areas for mounting cabinet connecting elements and transceivers. Connecting terminals are used to connect peripheral cables. Other connection techniques, such as Maxi-Termi-Point, are also possible. Field cables must be shielded and consist of twisted pairs of wires. Buses are implemented within a cabinet using conventional cables, and outside the cabinet using optical fibers. Teleperm XS is suitable for systems with area grounding as well as for systems with central grounding (ZEP). Module Carriers Depending on the application, different configurations of module carriers are used. In the basic design, the module carrier has a continuous backplane bus and offers 21 slots. If large amounts of signals need to be processed, expansion module carriers can be connected. The following variants are also supported: Cjdpfxjtzaxms Aatohd - split module carriers with two smaller, independent computers (10 slots each, each with its own fan and power supply) - mixed configurations, such as a compact combination of a computer with the associated signal processing modules Control System Cabinet SC 9422 with cross-bracing Double doors Cabinet indicator light Height x Width x Depth: 2200 x 900 x 400 mm Protection class: IP30 Power consumption: typically 550 W, max 1280 W Weight: 300 kg More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: good (used), Electrical control cabinet with Siemens S 5 controller. Codpfxo Agnnce Aatshd Complete with contactors, fuses, etc.

Condition: good (used), Year of construction: 2020, Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece -Dimensions: 450/250/H1600 mm -Weight: 56 kg/pc. Chedsx Nfktjpfx Aated

Condition: good (used), Year of construction: 2000, Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C Chsdpfowcb Dpsx Aated -Type: K1000 -Voltage: 230V -Power consumption: 700 W -Dimensions: 155/1100/H455 mm -Weight: 48 kg

Condition: excellent (used), Switch cabinet, distribution cabinet, switch cabinet TS, baying cabinet, server cabinet, system cabinet, baying system, baying cabinet system, system single cabinet -Manufacturer: Rittal, compact enclosure AX with fan and connection plug -Type: AX 1338.000 Chjdpfxoxpdtwj Aatod -Fan: Type SK 3237.100 -Plug: see photos -Number: 4x control cabinet available -Price: per piece -Dimensions: W x H x D 380/350/600 mm (without plug) -Weight 20 kg/piece

Condition: like new (used), Year of construction: 2023, overall weight: 100 kg, total length: 1,200 mm, total height: 1,800 mm, total width: 600 mm, Control cabinet, switchgear panel, expansion control cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX 8286.000 Two-door cabinet Cabinet dimensions: 1200 x 600 x H-1800 Weight: 100 kg Chsdszfhggopfx Aatjd Cabinet is like new / never used.

Condition: used, Control cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3, Rittal SK 3201.300, and Rexroth R911170402-102, as well as Murr Elektronik 54205. CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402-102, control cabinet, distribution box, enclosure, distributor, cooler, cooling unit, imaging, camera, camera cable. All other installed components are included in the scope of delivery (see images). Overall dimensions (with Rittal cooler): Width: approx. 45 cm, Depth: approx. 23 cm, Height: approx. 45 cm. Overall dimensions (without Rittal cooler, only the cabinet itself): Width: approx. 30 cm, Depth: approx. 23 cm, Height: approx. 40 cm. Chsdpfxok S Dazs Aated Modules: Keyence CV-5501P digital image receiver, Keyence CA-DC20E expansion unit, Keyence CA-MP81 monitor screen, Keyence CA-D3R cable for LED lighting, Keyence CA-CN3 cable, camera cable, Rittal SK 3201.300 thermoelectric cooling unit (100 watts cooling capacity), Rexroth R911170402-102 Profibus module, Murr Elektronik 54205 module interface. The monitor cover is slightly curved, but should be relatively easy to reattach (glue). More control cabinets – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 91 kg, total length: 45 mm, total width: 60 mm, total height: 160 mm, type of input current: three-phase, 🔧 Device Description Professional cooling unit for control cabinets, designed for industrial applications. The unit provides stable operating conditions for electronics and automation systems, protecting them from overheating. The TopTherm series model is characterized by high cooling performance and reliability during continuous operation. ⚙️ Technical Data Power supply: 400 V / 50 Hz (3~) / 460 V / 60 Hz Cooling capacity (L35 L35): Cjdpfx Aaoyw Ndgetohd 400 V: approx. 3.95 kW 460 V: approx. 4.35 kW Sensible cooling capacity: up to 3.58 kW Power consumption: up to 2.0 kW Rated current: 4.2 A / 4.6 A Refrigerant: R134a (2995 g) Operating temperature range: 10°C – 55°C Degree of protection: IP54 (internal) / IP34 (external) Weight: approx. 91 kg 📦 Delivery Pallet shipping available Personal collection also possible We assist in organizing international transport

Condition: used, Second-hand control cabinet, a Weinig Univar 10, suitable as a source of spare parts or for building a new control cabinet. Contents include, amongst others: EMC PA10A513 Interbus Moeller PKZM Schaffner FN351-25-33 Lenze EVF8216-E Setzermann SS6E3/5 Siemens 3TD43 Chedpeztvtwofx Aatjd Individual parts available on request

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. Chedpfsz N Sifox Aated 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity).

Condition: used, Second-hand control cabinet, a Weinig Unicontrol 10, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Siemens Simatic S5 Siemens EMG 45 Cjdjztvt Dspfx Aatjhd

Condition: good (used), Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Sim, heat exchanger control cabinet cooling unit -Type: 4299 -Voltage: 230V -Cooling capacity: 1,350 W Chedpow S Ecgefx Aatjd -Dimensions: 400/245/H1000 mm -Weight: 54 kg