Used Ventilation Fan for sale (4,975)

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap Kodpfx Asharupsh Nodg -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Kjdpovlz Arofx Ah Njdg Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Kdjdpsr H Sqysfx Ah Njg Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: used, Centrifugal fan REITZ type MAE Serial no. 601438 Year of construction 2017 Volume flow 10200 m³/h = 170 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 300 mm (nozzle diameter in the base plate) Air outlet 345 x 345 mm Motor speed 2940 rpm Motor power 18.5 kW Kjdpfx Ahjr H Sqve Njdg Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 450 x 450 mm - Sturdy metal housing made of 8 mm steel Space requirement L x W x H 1930 x 1240 x 950 mm Weight centrifugal fan 500 kg very good condition, only test run completed

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Kdodpfxoxcitvs Ah Nsg Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Condition: good (used), Siemens radial fan with 400V motor Siemens radial fan Pulley broken 400V motor Kdsdpoqbq Naefx Ah Neg Dimensions: HxDxW 1020 x 1190 x 830 Outlet: 74 x 72 cm Fan: 40 cm ⌀ Find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2005, Manufacturer: Trane Type: CLCE 1810 Year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Ksdpfxok Abw Tj Ah Nodg Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electromotor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Ksdpjxx U Tgofx Ah Nodg Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: new, Year of construction: 2022, functionality: fully functional, power: 30 kW (40.79 HP), rotational speed (min.): 1,470 rpm, rotational speed (max.): 2,147 rpm, overall weight: 2,200 kg, total length: 1,830 mm, total width: 1,780 mm, total height: 2,200 mm, type of cooling: air, Fan for working with high temperature gases. Syn gases. Explosionproof. Fan impeller and fan body made at high temperature resistant steel. Internal 2G Ex h IIC T3 Gb. External 3G Ex h IIC T3 Gc. Maximum inlet temperature 500C. Mechanical design temperature 575C. Mechanical design pressure 20kPa. Rated speed-2147rpm. Rated flow 2,894 m3/s. Rated pressure 2901 Pa. Model 45,5/45 RTB Position LG 270 (counterclockwise rotation) 3 pc.-new. (Possible RD 270 position used fan- 2pc.) Fan axle bearing housing has forced cooling with external fan. Vibrational sensors on fan axle bearing. N2 dosing to fan axle sealing. Fan body insulated. Kedsx Ndfcjpfx Ah Nodg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, High pressure fan motor 15kw / 3000 rpm. Maximum 1415Nm3/hr on 138mbar Weight 337kg. Kdedpfsx Htaksx Ah Neg Possible to buy maximum 3 fans- one unused ,other 2 littlebit runned, max 2-3 months.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Halifax Fan UK fan for sale. Model BLBC 23.5 . Rotational direction LG-90 or LG-270. Kodpfx Ahsx Hr Ute Nedg Motor 30kw, 3000rpm. With security switch. (Possible to buy max 6 pc.)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, volume flow: 1,800 m³/h, power: 0.55 kW (0.75 HP), ambient temperature (max.): 80 °C, Active Carbon Filter Extractor 0.55kw 1800m3/h Air Filter Smoke Extractor FAN ENGINEERING Active Carbon Filter Cartridge + Filter Blanket Extractor Tower Smoke, Air Filter for Sale Active Carbon Filter Cartridge 16pcs 5 Bag Filter Blanket. Power: 0.55kw 50Hz Ksdpoxvivksfx Ah Nedg Air Delivery: 750-1300m3/h Direct Drive FAN ENGINEERING Explosion-Proof Duct Fan. Extractor Filter Length: 1650mm Width: 530x460mm Weight: 150kg. Hanging Frame. Galvanized Steel Filter Housing.

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Kdodpsua Eu Njfx Ah Njg Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: used, The industrial suction fan is in working position. Kedpfxsgri I Re Ah Nsdg

Condition: used, functionality: fully functional, overall weight: 30 kg, color: silver, working width: 1,200 mm, Dimensions: 1170x1170x86 Kodswkgn Aspfx Ah Nodg

Year of construction: 2014, condition: good (used), functionality: fully functional, High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 special Year of construction: 2014 Volume: 4.72 m³/s Max. temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 rpm Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is intended for transporting paper/cardboard. The material is also chopped up. The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewings, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refer to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. Kjdpfoybb A Isx Ah Nodg The sale takes place ex location, without warranty or guarantee.

Condition: used, total width: 1,100 mm, total length: 1,000 mm, total height: 1,700 mm, Empty weight: 150 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 11 - Connection diameter [mm]: 410 - Output diameter [mm]: 360 - Transport dimensions: 1000mm x 1100mm x 1700mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Kdodpfjybb Dxox Ah Njg

Condition: used, Unused Elektror stainless steel radial ventilator/fan directly drive by Hoyer 55kW/400V/2975rpm el. motor. Air output 18 000 m3/hour. Max. static pressure 7000 Pa. Max. temperature 55 deg. C. New 2017. 6 identical pieces available. Kodeyanzbspfx Ah Nedg Specifications: Motor Power: 73.8 hp Airflow Capacity: 10,594.4 ft³/min. Total Pressure: 1 PSI

Condition: new, mileage: 100 km, power: 330 kW (448.67 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, navigation system, soot filter, Options: - LED headlights, cornering lights, and bumper-mounted fog lamps - Laminated windshield made of double-layer safety glass with sun protection film - Double-glazed windows in the rear wall of the cab - Double-layer safety glass - Rearview camera - Luxury sleeper cab - Additional lower window in the passenger door - Floor plate - Fixed bottom entry step of the cab - LED headlights - DAF Corner View - Cab color: E1980WHTE - Leather-wrapped steering wheel - Refrigerator - Automatic climate control - Electrically operated roof hatch - ECAS remote control - Foldable cinema passenger seat with table function - Xtra Comfort innerspring mattress, thickness 150 mm, for lower bunk - Auxiliary and engine heating with waste heat pump and timer - Roller blind on passenger side - Air-suspended driver's seat - Super Air - Adjustable armrests on both sides of driver's seat - LED interior lighting - Dashboard design: Vision - Cab interior trim: Hexagon - Extendable dashboard table - Roller blind on driver's side - PACCAR Connect - Digital tachograph VDO - DAF Infotainment System: Exclusive - Standard antennas: AM/FM/DAB/DAB+ - Wireless charging device - Acoustic reversing warning system - Turn assist - Front axle type 165N, - Axle load monitoring - Manual control for lifting the first and/or trailing rear axle(s) - Axle load limiter 11.5 t - Parabolic front suspension, - Trailing axle load 8.0 t - Lifting device for steered trailing rear axle - Front axle: Tire size 315/70R22.5, Goodyear KMAXS2 - Driven rear axle: Tire size 315/70R22.5, Goodyear KMAXD2 Kedpfsya R T Tex Ah Njdg - Trailing axle: Tire size 315/70R22.5, Goodyear KMAXS2 - MX-11 engine, 6-cylinder diesel engine with multi-stage torque, 10.8 liters. Output: 330 kW - 449 HP at 1600 rpm. Maximum torque: 2350 Nm at 900-1125 rpm. - ECO power - Traction aid 15.0 t - Driven rear axle with mechanical differential lock - Rear axle ratio 2.47 - Automated direct-drive gearbox TraXon 12TX2210, ratio 16.69-1.00, 12 gears - Emissions standard Euro 6 - Idle shutdown automatic, after 5 minutes idling - Automated gearbox, TraXon, 12 gears - Maneuvering mode - MX Engine Brake, exhaust brake and ZF-Intarder - Spring-loaded brake cylinders, 1st front axle - Parking brake assist - Pneumatic control for parking brake - Frame rail height 310 mm, thickness 7.0 mm. Internal reinforcement front and rear - 545-liter aluminum fuel tank - LED tail lamp - Wheelbase 4.80 m / rear overhang 2.70 m - Rear underrun protection - Exhaust pipe right - Drawbar crossmember with Ringfeder trailer coupling - Pneumatic connection - Hard-wired body signals and warnings - Connector for hard-wired engine speed control - Preparation for aftermarket switches - CAN J1939 functions - ECAS control - Body mounting method BAM 1, console type B - Application connector chassis (A218). Replacement wiring harness to dashboard and roof console. - Additional connector for lighting in chassis - Chassis frame prepared for standard applications - First gearbox PTO, type N../10c, - Dust shield - Vision package Body: FASSI Loader Crane F235A.2 e-dynamic Execution compliant with CE Directive (EN 12999) Slewing range 400° Double knuckle joint system with PROLINK (overextendable articulated arm up to 15) Electronic overload cut-off device with FX500 6-function RCH or RCS radio remote control (linear levers) with display and XP system Emergency stop function, as well as optical alarm

Condition: new, mileage: 100 km, power: 330 kW (448.67 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, navigation system, soot filter, Options: - LED headlights, cornering lights and bumper-mounted fog lights - Windscreen made of double-layer laminated safety glass with solar protection film - Double-glazed windows in the rear wall of the cab - Double-layer safety glass - Reversing camera - Luxury sleeper cab - Additional lower window in the passenger door - Floor plate - Fixed lowest cab entry step - LED headlights - DAF Corner View - Cab colour: E1980WHTE - Leather-covered steering wheel - Refrigerator - Automatic climate control - Electrically operated roof hatch - ECAS remote control - Foldable cinema passenger seat with table function - Xtra Comfort pocket spring mattress, thickness 150 mm, for lower bunk - Parking and engine heater with heat pump and timer - Roller blind on passenger side - Air-suspended driver's seat - Super Air - Adjustable armrests on both sides of the driver's seat - LED interior lighting - Dashboard version: Vision - Cab interior trim: Hexagon - Extendable dashboard table - Roller blind on driver's side - PACCAR Connect - Digital tachograph VDO - DAF Infotainment System: Exclusive - Standard antennas: AM/FM/DAB/DAB+ - Wireless charger - Acoustic reversing warning system - Turn assist - Front axle type 165N, - Axle load monitoring - Manual control for lifting the leading and/or trailing rear axle(s) - Axle load limiter 11.5 t - Parabolic front suspension - Trailing axle load 8.0 t - Lift device for the steered trailing rear axle - Front axle tyre size 315/70R22.5, Goodyear type KMAXS2 - Driven rear axle tyre size 315/70R22.5, Goodyear type KMAXD2 - Trailing axle tyre size 315/70R22.5, Goodyear type KMAXS2 - Engine MX-11, 6-cylinder diesel engine with multi-stage torque, 10.8 litres. Power output: 330 kW - 449 hp at 1600 rpm. Max. torque: 2350 Nm at 900-1125 rpm. - ECO performance - Traction aid 15.0 t - Driven rear axle with mechanical differential lock - Rear axle ratio 2.47 - Automated direct-drive gearbox TraXon 12TX2210, ratio 16.69-1.00, 12 speeds - Emission standard Euro 6 - Idle shutoff after 5 minutes of idling - Automated gearbox, TraXon, 12 speeds - Maneuvering mode - MX engine brake, exhaust brake, and ZF intarder - Spring-loaded brake cylinders, 1st front axle - Parking brake assist - Pneumatic control for parking brake - Longitudinal member height 310 mm, thickness 7.0 mm. Internal reinforcement front and rear - 545-litre aluminium fuel tank - Rear LED tail light - Wheelbase 4.80 m / rear overhang 2.70 m - Rear underrun protection - Exhaust pipe on the right - Drawbar cross member with Ringfeder trailer coupling - Pneumatic connection - Hardwired body signals and warnings - Connector for hardwired engine speed control - Preparation for aftermarket switches - CAN J1939 functions - ECAS control - Body mounting method BAM 1, bracket type B - Application connector chassis (A218). Spare cable to dashboard and roof console. - Additional chassis lighting connector - Chassis frame prepared for standard applications - First transmission PTO, type N../10c, - Dust shield - Vision package Superstructure: FASSI loader crane F235A.2 e-dynamic Execution according to CE directive (EN 12999) Kodpfeya R Udex Ah Njdg Slewing range 400° Dual linkage system with PROLINK (over-bending knuckle arm up to 15) Electronic overload cut-off with FX500 6-function RCH or RCS radio remote control (linear levers) with display and XP system Emergency stop as well as visual alarm

Condition: excellent (used), Moog valve f. Battenfeld Kdodpfjx Uq Afjx Ah Nsg Mod D663Z4714 Type L03HXBU4NSD2-0

Condition: used, functionality: fully functional, machine/vehicle number: XLRAS47MS0E909300, mileage: 1,445,000 km, first registration: 07/2011, fuel type: diesel, empty load weight: 12,800 kg, maximum load weight: 13,200 kg, overall weight: 26,000 kg, tire size: 315/70, tire condition: 50 %, axle configuration: 6x2, wheelbase: 6,100 mm, axle spacing: 6,100 mm, brakes: intarder, gearing type: automatic, emission class: euro5, suspension: air, total length: 12,000 mm, total width: 2,600 mm, loading space length: 9,600 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2011, Equipment: additional headlights, air conditioning, central locking, cooling unit, fog lights, onboard computer, parking heater, retarder, seat heater, tail-lift, traction control, Year: 2011 Mileage: 1,445,000 km Automatic transmission ZF Intarder Tyres 315/70 (385/55 front) – Alloy wheels 6x2 wheelbase 6,100 mm – 3rd intelligent axle Full air suspension Fridge box in cab Kdedsyazq Nspfx Ah Nsg Isothermal LAMBERET FNA 04-2026 body Internal dimensions: 9.60 x 2.46 x 2.60 m CARRIER SUPRA 950 ANTEOC tail lift, 3,000 kg capacity Payload: 13,180 kg

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Kedox Tuyxspfx Ah Nedg

Condition: ready for operation (used), Ventilator Kedpfonac Ilox Ah Nsdg Driving: 22 kW

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. Ksdoxnlwzspfx Ah Nodg An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054