Used Extraction Arm for sale (9,363)

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Codpfeupv U Hex Aiijri Good working condition. Please check out our other listings as well.

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm Codpfxjztwgro Aiieri -Weight: 31 kg

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility. Csdpfx Aij Afbqvsiori

Condition: used, Year of construction: 2022, Technical data: Crjdpfx Aisxbflreiji Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Year of construction: 2017, condition: excellent (used), Storage location: 2727 Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Serial number: 16002366 Volume flow: 700 m³/h Max. negative pressure: 1,100 Pa Connection diameter: 50 mm Features: mobile Accessories: see image, including laboratory extraction arm Connection: 0.55 kW, 230 V Cjdpfx Aielt Uinsisri Weight: 42 kg Dimensions: 485 x 485 x 920 mm (without hose)

Condition: excellent (used), Walther NOVA 2000 extraction and dust collection unit with 2 extraction arms mobile, on castors 2 units available Cjdoivta Njpfx Aiisri In very good, ready-to-use condition!!!

Condition: excellent (used), Dust extraction and filtration system, Nedermann Type 663 with 2 extraction arms In very good condition, directly from production!!! Csdpfx Aieiyyxcoijri

Condition: good (used), Year of construction: 2006, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Lincoln Electric, mobile welding fume extraction system type Mobiflex 200-M -Drive: 0.75 kW Codo Adzcpopfx Aiisri -Extraction arm: Ø 205 mm x 3930 mm -Transport dimensions: 1520/830/H2510 mm -Weight: 109 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, System: • Hexagon Absolute Arm 8340, 7-Axis • RS6 Kit • CP-C Installed • Magnetic Base with Mounting Ring • Certified Length Standard – 1016mm (40 inch) • Leap Frog Kit Computer & Software: • Inspire Single Seat License • BendingStudio TUBE • BendingStudio CAD Wizard Cjdsymnvrepfx Aiieri

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left Crjdpfx Aiedqzbrsioi 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Crodpfx Aie Af E D Hoiei Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Crjdpe Afhr Tefx Aiioi Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Codpsz S Uxhefx Aiijri Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Equipped with an additional safety guard.

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Crjdpfxjdqzcvj Aiisi Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: used, Year of construction: 2012, machine/vehicle number: 02 13 2202, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, volume flow: 16,000 m³/h, suction capacity: 16,000 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, Industrial dust extraction and filtration system, built in 2012 by the Italian company SILVI & C. S.r.l. The system is complete with a 22 kW fan, cartridge filtration system, automatic filter cleaning using compressed air, control panel, and STS CO₂ fire suppression system. Technical specifications: Manufacturer: SILVI & C. S.r.l. – Italy Year of manufacture: 2012 Serial number: 02 13 2202 Cjdpo Ahrk Njfx Aiieri Airflow rate: 16,000 m³/h Static pressure: 350 mm H₂O (approximately 3,430 Pa) Electrical power: 22 kW ATEX classification: II 3D – Zone 22 – T 150 °C CE marking Electrical supply: 400 V Equipment: 22 kW industrial fan Cartridge filtration system Automatic compressed air filter cleaning system TURBO electronic control unit for filter cleaning management Main electrical panel with controls and protections STS CO₂ fire suppression system Two lower containers for dust collection Inspection and maintenance access doors Condition: Used system, functional and complete with fan. Machine manual and electrical diagram dated December 2012 are available. Further information and photographs available upon request. Transportation not included. Any dismantling and loading operations will be agreed upon separately.

Condition: used, Year of construction: 2006, functionality: unexamined, volume flow: 25,300 m³/h, filter area: 123 m², actuation type: electric, total height: 4,600 mm, total length: 5,540 mm, total width: 1,800 mm, Equipment: CE marking, In operation at our facility until week 31 of 2026. For sale after consolidating several smaller filters into a single, larger filter housing. Material extracted: wood chips and wood dust. Filter hoses replaced in 2020. Documented maintenance: 2012, 2020, 2024. Scope of sale: - 1 Rippert RDSN 7 filter housing; L 5.6 x W 1.8 x H 4.6 m - 1 cyclone separator incl. steel frame; L 2.4 x W 2.4 x H 8 m - 2 raw air fans - optional associated piping, without additional cost - optional spare parts: 2 matching raw air fans, new, balanced, manufactured in 2025, plus €2,500 net Credpfs Ahhhwjx Aiisi Sale from the foundation. Inspection possible. Subject to prior sale.

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Cjdpfjz R Sulex Aiijri Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 457256, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 5,100 m³/h, Equipment: CE marking, documentation/manual, VACUMOBIL JZ300-L Anti-static material surcharge Codpfx Ais Ad I Nveijri Suction nozzle, Ø220mm - PZR "Online" dust extraction surcharge, Jx300 French documentation

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Cedps Ahmwyjfx Aiiori Working width 4,000 mm Working height 3,000 mm Overall width 4,050 mm Overall height 3,050 mm Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1040070, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,200 m³/h, filter area: 1.9 m², noise level: 76 dB, actuation type: electric, total height: 1,460 mm, total length: 1,250 mm, total width: 820 mm, overall weight: 140 kg, Used, fully functional dust extraction unit from Schuko in a robust industrial design. Ideal for extracting wood dust and shavings from woodworking machines. Thanks to its mobile design, it can be used flexibly in the workshop. Crjdpfx Aij Af I Sxeiji Manufacturer: Schuko Model: MiniMax F 300 Year of manufacture: 2014 Good used condition Ready for immediate use If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 4000000783, functionality: fully functional, input voltage: 400 V, input current: 3 A, input frequency: 50 Hz, type of input current: AC, volume flow: 1,200 m³/h, suction capacity: 1,200 m³/h, intake manifold diameter: 150 mm, noise level: 75 dB, actuation type: electric, total height: 620 mm, total length: 1,450 mm, total width: 620 mm, overall weight: 130 kg, year of last overhaul: 2026, Equipment: CE marking, Fully serviced and inspected dust extraction system. Ready for immediate use. Codpj Agvwaofx Aiijri

Condition: good (used), Year of construction: 1980, Forklift attachment, crane arm, load arm Cedpfxs Ahgtfs Aiijri -Manufacturer: stabau, crane arm, load arm for forklifts -Type: TKR25 Load capacity: 2500 kg -Receiver: LSP 500 mm / ESP 400 mm, dimensions see photos -Number: 2x crane arms available -Price: per piece -Transport dimensions: 1400/1350/H425 mm -Empty weight: 123 kg/unit

Condition: like new (used), Year of construction: 2016, AL-KO POWER UNIT 300 incl. briquetting press Crjdpfxj Ahw T Do Aiisi Alko Type 300P-BP 30-50 Suction nozzle 300 mm Motor rated power 7.5 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow rate 6,000 m3/h Rated volume flow rate* 5,089 m3/h Negative pressure at rated volume 2,587 Pa Filter area 30 m2 Pre-separator integrated Extinguishing system integrated Control for 8 machines Chip collection volume (net/gross) briquetting press 900 liters Sound pressure level 71 dB(A) Dimensions (L / W / H) in mm 3,000 x 1,361 x 2,817 Briquet diameter 50 mm Net weight without packaging 1,570 Absolutely new condition, from a school workshop

Condition: used, Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector Nederman Industrial Extraction System, Fume, Welding Extraction and Dust Collector, Used machine Manufacturer: Nederman (Helsingborg, Sweden) Fan type: FQ 561 N4A RD 160L/2P B3 RDO (NCF 160/25) Year of manufacture: 2013 Overall dimensions: Filter unit dimensions: 1650 x 1530 x 4920 mm (1200 x 1510 x 4180 mm) Fan unit dimensions: 1200 x 1100 x 1120 mm Motor and fan parameters: Motor power: 18.5 kW (2P, frame size 160, 50 Hz) Max speed: 3000 rpm Features: High-capacity multi-module filter housing with cassette filter elements Built-in control box mounted on the filter unit Crjdpfx Ao Ahqhnoiiei High-capacity standalone 18.5 kW Nederman NCF 160/25 centrifugal fan Includes ductwork sections and adapters for installation Lower hopper and dust collection bin Suitable application areas: Extraction and filtration of dry dust generated during grinding, sanding, and material handling. High-capacity extraction of welding fumes, plasma, and laser cutting smoke. Centralized dust extraction system for complete workshops or multiple machining stations

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Cedpez Ikzpefx Aiieri Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.