Used Fan for sale (3,637)

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan 2019, unused, mounted on frame with 45KW motor, see plates for full spec Cedpfxjz E Nqqj Ailorh

Condition: like new (used), functionality: fully functional, extraction nozzle diameter: 300 mm, Two exhaust fans in like-new condition are for sale. They ran very little. They can be tested on-site. The price is for the pair. Cedjzz Scwjpfx Ailjrh The intake diameter is 300 mm. The motor power is 11 kW.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly for its age. The start-up was documented on video; the video can be sent to serious potential buyers upon request. The scope of delivery also includes the existing control cabinet of the extraction system, including the fan control. The control cabinet is complete. Based on the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 hp Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 rpm Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Crsdpfxjz Ikxzo Ailjh Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse rating: 35 A Control voltage: 230 V Circuit diagram no.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by arrangement. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are the responsibility of the buyer and will be carried out at his expense and risk. Terms of sale Sale from the location. Sale in the existing used condition, as inspected. No guarantee or warranty, insofar as legally permissible. Technical specifications provided to the best of our knowledge; errors and prior sale reserved. Inspection on site is possible and recommended by arrangement. Selling price: 2,100.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Credpfx Aioua Eu Noljh

Year of construction: 2023, condition: used, functionality: fully functional, Hosokawa Alpine hammer mill Type UPZ 500 Year of construction: 2023 Weight: 1300 kg Capacity/max: 5,910 l/min Dimensions: approx. 230x110x129 cm Documentation available This lot is located in room 3 Codpfoz Iam Isx Ailerh Hosokawa Alpine centrifugal fan with electric motor on a steel base frame. Details: Brand: Hosokawa Alpine Type: centrifugal fan Drive: electric motor Design: housing with protective cover and connection/piping Frame: steel base frame Color: gray with blue motor Condition: used

Year of construction: 2016, condition: used, Name: Used Centrifugal Fan Manufacturer: REITZ Type: KXE 050-035530-00 Year built: 2016 Speed: 2.960 / 2.809, max.: 3138 rpm Driving force: 45 kW Throughput m³/h: V= 355 m3/min Cedjz Innaspfx Ailjrh Material: regular steel Dimensions: L 2.300 x W 1.200 x H 1.420 mm Empty weight: Approx. 900 kg Technical doc.: yes, in German language Message: Intake temperature 20° and max. temperature 80°. Is unused, therefore as good as new! Accessories: Legs Condition: Used Price: On request

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Cedpjzzaz Iofx Ailsrh Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: used, functionality: unexamined, For sale is a used, single Schuko radial fan with a directly mounted three-phase motor. According to the nameplate, the motor output is 4 kW, the rated speed is 2,900 rpm, the rated voltage is 380 V, and the frequency is 50 Hz. Scope of delivery: fan housing with impeller and mounted electric motor, as shown in the photos. This is not a complete exhaust system. The fan shows age-related and usage-related dirt and paint chipping. No current function test has been performed. Therefore, the functionality of the motor and fan cannot be confirmed. The fan is sold for inspection and possible repair or as a source of spare parts. Cjdpsz Iuiwefx Ailorh The year of manufacture, exact model designation, air flow rate, and pressure are unknown. Inspection is possible by appointment at the location in Thun, Switzerland. The fan is sold in its current, untested condition without any guarantee of functionality or warranty. Collection, loading, and transport are to be organized and paid for by the buyer. In the event of export, any applicable customs clearance and import costs will be borne by the buyer.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 500 mm, 2026 Weishaupt WM-G10/3-A ZM Monarch Industrial Gas Burner – 100–1,000 kW – Only 3 Months' Use – Complete Controls & Gas Train. Crjdpoz Iucwefx Aileh Manufactured 2026 and used for approximately three months as a temporary winter heating solution at a commercial facility. Removed from service following the site's transition to an electrified heat-pump heating system. Burner was operational prior to removal. Complete with associated Weishaupt controls and gas train/components as pictured. Original purchase/parts receipts available.

Condition: used, Year of construction: 2001, overall weight: 1,750 kg, input voltage: 400 V, power: 90 kW (122.37 HP), The fan is in working condition. 90kW motor Crsdpfxoymkdlj Ailoh

Condition: good (used), operating hours: 243 h, The EK-40 is a centrifugal drying system for the rapid and spotlessly clean hot air drying of metal and other materials that are wet or damp after surface treatment. It enables the drying of parts in a rapidly rotating drum, using centrifugal force and hot air. It is preferably used for drying and/or degreasing parts in small to medium quantities and is recommended as a supplement for perfect surface treatment. Cjdpfx Aiez Eqc Islorh The centrifuge can be operated with the attached Leister hot air blower to increase the drying speed. Alternatively, it can be used with the included heating coil, or without any heating/ventilation. Similar to Steimel centrifuges, Dittmann centrifuges, and Rösler centrifuges – also suitable for oil removal.

Condition: excellent (used), functionality: fully functional, Power: 22 kW Codpfx Aijz E H Eroljrh

Condition: used, Year of construction: 1999, Used Equipment Features and Technical Specifications: - Centrifugal fan with V-belt drive - Suitable for use in both raw air and clean air applications - Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Csdpfx Aszk Niyoiljrh - Air discharge direction GL 360/5 - Connection: 300 mm - Motor power: 11 kW - Airflow: 7,000 m³/h Availability: Immediate Location: Röllbach

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Crjdpfxjzw Ucxs Ailoh Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Crjdpfx Aozw Ug Rjilsh Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Duct Fan ZENNER VTZ 560/50/2-W Crjdpfez Hwztjx Ailsh Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Crsdpfx Aiez Hwypsloh Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Cjdpfxoxx U Tgo Ailerh Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount Crsdsvu Hrkepfx Ailjh KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: used, Duct Fan Coral PAP HP 7,5 Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Csdpfoz Hw Dnex Ailjrh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Duct Fan Coral PAP HP20 Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 Crsdpoz Hw A Dofx Ailjh VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1990, condition: excellent (used), functionality: fully functional, KOJA radial fan 200kW 110.000m3 exhaust blower /ct1789/ KOJA Electrical power: 200kW, 50Hz Year of manufacture: 1990 Impeller diameter: 1200mm Impeller material: Operating pressure: 2.94kPa -- (300 water mm) Codpfx Aowin Eaeilerh Capacity: 100.000m3/h -- m3/s -- 1050kg/h Transportable particle: 0,5 - 15mm -- 20-25kg/m3 Overall dimensions: Height 2500 x width:2000 x length:3000mm Weight:4400kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Condition: excellent (used), For sale is a powerful, industrial radial fan from the renowned Italian brand Euroventilatori International S.p.A. This machine stands out for its high-quality construction and ATEX certification, meaning it is suitable for use in potentially explosive environments (e.g., dust extraction in woodworking plants, paint shops, or the chemical industry). ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Euroventilatori International S.p.A. (Italy) Fan Type: TH 1002/A LG315 ES4 Year of Manufacture: 2010 Credpozp Alfsfx Ailsh Serial Number: X100638 Motor Power: 37 kW Motor Type: 225S (4 poles / 50 Hz) Fan Speed: 1470 rpm ATEX Certificate: CE Ex II 3D c T125 (compliant with directive 94/9/EC) Permissible fluid temperature: from 15°C to 80°C Permissible ambient temperature: from -15°C to 40°C Reference documentation: SAXN1010 🛠️ ADVANTAGES AND APPLICATIONS: Operational Safety (ATEX): The fan meets stringent explosion-proof standards for dust zones (3D). Ideal for extensive dust extraction systems, silos, and filters where there is a risk of dust ignition (e.g., wood dust). High Performance: A 37 kW motor guarantees enormous suction and discharge force, allowing it to handle entire production lines or extensive ventilation systems. Italian Reliability: Euroventilatori is one of the leading European manufacturers of industrial fans, guaranteeing a robust construction and long-lasting, trouble-free continuous operation. Durability: Designed for the transport of dusty air in harsh industrial conditions. 📍 ADDITIONAL INFORMATION: Condition: Used, fully functional. The machine is ready to be implemented in a demanding production environment.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 7.5 kW – 400 V - 1,500 rpm - Extraction nozzle diameter 250/350 mm - Airflow 7,000 m³/h - 2,900 Pa Csdjzk N Uvepfx Ailsrh - ATEX-certified for explosive dusts - Dimensions approx. 1,200 x 1,170 x 800 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - Motor: 15 kW - 400 V - 3,000 rpm Credozk N Upspfx Ailjh - Extraction nozzle diameter: 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: at short notice Storage location: 63934 Röllbach