Used External Staircase for sale (5,201)

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area Dcjdpfxezizk Ho Ac Hoi - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 850 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: Series 0-M, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis SUPERMAX YCM-VMC-85A was manufactured in 1996. It features a table size of 940 × 400 mm, with an X-axis travel of 850 mm, Y-axis travel of 440 mm, and Z-axis travel of 630 mm. The machine is equipped with a spindle speed of 8,000 rpm and a tool changer with 22 positions. If you are looking to get high-quality machining capabilities, consider the SUPERMAX YCM-VMC-85A vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 • Table • Outer length: 940 mm • Outer width: 400 mm • Table load: 250 kg • Number of tool slots: 22 • Chip conveyor: Hinged belt type • External hydraulic power unit • Automatic lubrication system • Pneumatic filtration/regulation unit • Work status tower light (red/yellow/green) Dsdpszizm Isfx Ac Hsci

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Dsdpfx Aozizhfoc Hsci Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: Dedpfxozizg Ue Ac Hoci 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) Dcsdpfx Aozizghsc Hji (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Dcodpfx Ajzizdyec Hoi Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Complete analysis using the stationary spark spectrometer SpectroMaxX: With the aid of the spark spectrometer, the alloy content and trace elements of macroscopic solid samples can be determined with high accuracy down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration levels depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption through argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Dsdpfx Acezizdtj Hoci Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power 4 kW Display system: Dedicated microcontroller for each CCD Serial interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive fumes and high dust levels Spectrometer: 90-253 V 50/60Hz Data max. 400 VA during sparking Fuse: 16 A slow-blow Version: Tabletop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) Dcodpfx Aeziyz Roc Hji The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: used, Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) Dcedpfx Aeziyymsc Hsi - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: excellent (used), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum Temperature: –42°C Maximum Temperature: +180°C Temperature Change Rate, Cooling: 4 K/min Temperature Change Rate, Heating: 3.2 K/min Temperature Deviation Over Time: ± 0.1 to ± 0.5 K Temperature Uniformity Spatially: ± 0.5 to ±1.5 K Climate Testing: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Dsdpfx Aceziyyge Hsci Humidity Range: 10 to 98% RH Temperature Deviation Over Time: ± 0.1 to ± 0.3 K Temperature Uniformity Spatially: ± 0.5 to ± 1 K Humidity Deviation Over Time: ± 1 to ± 3 % RH Halogen Lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 4.1 kW, Rated Current: 14 A Refrigerant: R-404A Weight: approx. 515 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications reserved!) Further questions can be answered by phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: Dcedpfx Ajziyxpec Hji The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Dcodpfx Asziyxioc Hsi Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Dcodpfsziyw Ssx Ac Hsi Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Dcsdpfxoziyw Ej Ac Hoi Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Dsdpfxeziywrj Ac Hsci Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Climate Test Chamber We offer a Vötsch climate test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm External dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Specifications for temperature tests: - Temperature range: -42°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature uniformity: ±0.5 to ±1.5 K - Temperature change rates: - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation at +20°C: 4500 W Specifications for climate tests: - Temperature range: +10°C to +95°C - Dew point range: -3°C to +94°C - Humidity range: 10 to 98% r.H. - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.5 to ±1.0 K - Temporal humidity deviation: ±1 to ±3% r.H. - Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 Important buyer information: The following procedures are carried out on all our chambers prior to sale: 1. Functional checks and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Dsdsziywlspfx Ac Hsci Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW; Rated current: 22.0 A Change rate (cooling): approx. 3.5 K/min Change rate (heating): approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Layout drawing External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as the buyer, please note the following information! The following items are carried out on all chambers offered by us: Dodpfxjziyvue Ac Heci 1. Functional inspection and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Technical data and information subject to change and errors excepted!) We are happy to answer further questions by telephone.

Condition: excellent (used), Here we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Temperature change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (approx.): Height 750 mm, Width 650 mm, Depth 720 mm External dimensions (approx.): Height 1800 mm, Width 850 mm, Depth 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Nominal power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Type: TS-70/350 Important safety information for buyers: The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) Further questions can be answered by phone. Dsdpfoziyphex Ac Hoci

Condition: excellent (used), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled CTS Temperature Test Chamber Dcjdpfxjziygyo Ac Hoi Technical specifications: Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability, temporal: ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Model: T-70/600 Important Information for Buyers! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), We are offering a temperature test chamber here. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Dcsdpfsziygmex Ac Hji Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Feutron Temperature Test Chamber We are offering a temperature test chamber here. Feutron Temperature Test Chamber, Air-Cooled Nominal test chamber volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber interior: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range -70°C to +180°C Heating rate: 4.0 K /min Dcedpfx Acsziyggj Hei Cooling rate: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Dcjdpfxsziycbs Ac Hoi Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Dcsdsziyb Rjpfx Ac Hsi Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Riedel Type: PC 251.1L4WE.I Riedel Process Chiller PC 251.1L4WE.I water-cooled – 25.6 kW – 400 V For sale is an industrial liquid/process chiller from Riedel Kooling, type PC 251.1L4WE.I. The unit is water-cooled (WE) and designed for precise, reliable cooling tasks in industrial applications. Important note: This is not an air-cooled unit. Operation requires an external cooling water circuit (e.g. dry cooler, cooling tower, or building's chilled water system). Additional information: Ideal for machine cooling, process cooling, industrial applications Technical data: Manufacturer: Riedel Kooling Type: PC 251.1L4WE.I Year of manufacture: 2013 Cooling type: water-cooled Refrigerant: R407C Cooling capacity (net): approx. 25.6 kW Temperature range of cooling medium: approx. +12 °C to +20 °C Setpoint tolerance: ±2 / ±1 / ±0.5 K Pump pressure: 3 bar (optional 5 bar) Nominal flow rate: approx. 3.6 m³/h Tank volume: approx. 200 liters Electrical data: Power supply: 3 × 400 V Frequency: 50 Hz Phases: 3-phase Rated operating current: approx. 14.6 A Power consumption: approx. 10.3 kW (with 3-bar pump) Protection class: IP54 Dimensions & weight: Dimensions (W × H × D): approx. 1,872 × 2,005 × 874 mm Weight (net): approx. 390 kg Dodpfozix Naex Ac Hsci Condition: used Scope of delivery: (see photo) (Specifications and information subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum temperature: 1300 °C Voltage / connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating power: 75 kW Heating zones: 5-sided (sides, bottom, door, optionally ceiling) Internal dimensions (firing chamber) Dodpfx Aezix D Rsc Hoci Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Height (h): 1,720 mm Floor load: 10 kg/dm² Volume: approx. 2,580 litres External dimensions (overall unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.