Used External Staircase for sale (5,747)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 8,483 h, load capacity: 4,000 kg, lifting height: 3,100 mm, fuel type: electric, mast type: simplex, construction height: 2,404 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,000 kg Lifting height: 3,100 mm Overall height: 2,404 mm MACHINE DETAILS Mast type: Standard Godpfx Akoz I Rzceyobu Vehicle type: Electric 4-wheel forklift ISO class: ISO class 3 = 2,500–4,999 kg Battery condition: 60–80 % Battery voltage: 80 V Unladen weight: 4,700 kg Operating hours: 8,483 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cabin External reference: SL12869SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 280127900226, Year of construction: 2008, operating hours: 16,627 h, load capacity: 25,000 kg, fuel type: electric, No minimum price – guaranteed sale to the highest bidder! Comes with a battery from 2024! TECHNICAL DETAILS Load capacity: 25,000 kg Gbjdpfsz I Nbnjx Akyju MACHINE DETAILS Drive: electric Battery voltage: 80 V Battery year: 2024 Unladen weight: 2,390 kg Operating hours: 16,627 h EQUIPMENT Heater Full cab External reference: SL15869SP

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Gedpfx Aksz N H D Doysbu Weight 200 kg Good condition

Condition: new, Year of construction: 2026, CORMAK VP3000 Gluing Press The CORMAK VP3000 is an industrial hydraulic gluing press designed for precise bonding of solid wood and wood-based components. Equipped with six fully adjustable hydraulic cylinders with high pressing force, the machine ensures uniform pressure distribution and repeatable gluing results across the entire working surface. Thanks to its robust construction and advanced hydraulic system, the CORMAK VP3000 is perfectly suited for both individual production and serial manufacturing. Main advantages of the machine 6 hydraulic cylinders – each with a pressing force of 2000 kg, enabling uniform bonding of large and demanding components. Full pressure adjustment – allows precise adjustment of the clamping force according to the type and thickness of the material. Hydraulic valves with locking function – maintain constant pressure throughout the entire working cycle, ensuring reliable and consistent gluing results. Pressure gauge – enables continuous monitoring and accurate setting of operating parameters. Easy adjustment of pressing units – quick positioning of the clamping elements saves time and increases work efficiency. Steel construction – provides high stability and resistance to deformation during long-term operation. Design and technology The CORMAK VP3000 press has been designed for intensive use in industrial environments. The rigid frame made of steel profiles provides a stable base for six hydraulic pressing units. Each unit can be adjusted independently and positioned according to the operator’s requirements. The minimum distance between pressing units is 240 mm, allowing work with narrow and short components. Thanks to locking valves and an integrated pressure gauge, the operator has full control over the entire gluing process, including pressing force and pressure distribution. This solution is particularly important in factories producing glued panels, countertops, and furniture components, where connection quality and stability are essential. Precision and working efficiency One of the key advantages of the VP3000 model is its excellent repeatability – both in terms of pressing force and the accuracy of glued joints. The gluing press provides even pressure distribution over the entire working area, eliminating the risk of gaps, voids, or improperly bonded sections. The machine is simple and quick to operate and does not require extensive operator training. This allows faster implementation into production environments and improves overall manufacturing efficiency. Applications The hydraulic CORMAK VP3000 press is ideal for: gluing solid wood and laminated panels, production of furniture and structural glued panels, manufacturing worktops and cabinet fronts, bonding frame and staircase components, professional woodworking workshops and serial production facilities. Standard equipment 6 hydraulic cylinders with a pressing force of 2000 kg each, hydraulic pressure gauge, working pressure locking system, adjustable pressing units, robust steel construction. Technical specifications Parameter Specification Total height 2040 mm Total width 3000 mm Maximum clamping height 1550 mm Minimum distance between pressing units 240 mm Hole distance from pressing unit 50 mm Working pressure 6 × 2000 kg External dimensions 3030 × 450 × 660 mm Total weight 260 kg Gbsdpewcy U Tjfx Akyeu

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, especially for temperature control of injection molds and other process tools. Serial No.: 102010690002 Year of manufacture 2010 Temperature max. 90°C (for water) Gjdpfoz N H Dwjx Akysbu Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min. Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM Gbodpfxsz I A Dco Akyeu 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Godpfx Ajz Nv H Ujkyjbu Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Gedpfxjz I Az Us Akyobu Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: new, Year of construction: 2023, External overall dimensions: 240x600cm Height: 520cm Drainage with PVC: pipes in the columns Anchoring: Yes Walls: PU 40mm – RAL 7016 outside / 9002 inside Floor: metal mesh (reinforced) Hydrophobic plywood, Betopan in sanitary facilities Laminate floor, tiles with base External doors: aluminum, 1 piece 90×190 sealed, with threshold 2 pieces 70×190 sealed, with threshold Inner Door: Aluminum, white 1 piece 90×190 tight, no threshold Gbjdpfx Akjm Dr Uksyju Windows: PVC, RAL color 1 piece 80×113 2 pieces 100×113 Electrical: 32A EU external power connection One-shoulder metal staircase with a width of 90 cm + railing

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Gbjdpfjz Izduex Akyou Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Gedporntirjfx Akyobu Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Gjdpfxjxx Tigs Akyjbu Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform Gbedpfxjikwgno Akysu -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm -Weight: 14 kg

Condition: used, functionality: fully functional, machine/vehicle number: 515xxxxxxxx, Year of construction: 1998, operating hours: 58,791 h, load capacity: 1,000 kg, lifting height: 3,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, fork length: 1,000 mm, empty load weight: 1,545 kg, total length: 1,611 mm, drive type: Elektro, construction width: 980 mm, Electric 3-wheel forklift Chassis number: 515xxxxx Load center: 500 Gedpfxszif R Rs Akysbu ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Impulse Condition: Limited operational readiness Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 24V Battery type: PzS Description: The unit is operational but is sold as is, as received from the customer, without any warranty or guarantee. The forklift has NOT been repaired or refurbished and has NOT undergone UVV inspection, and may therefore have defects. The sale is actually intended for dealers. In the event of a purchase, you accept the above conditions. Impulse control, full free lift, hydraulic steering, hour meter, discharge indicator, 24-volt battery (year of manufacture, Ah, and weight unknown), external charger included.

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Gbsdpoz Rq Euefx Akysu Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Gbodpfx Akez Rrbdoyju Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: excellent (used), Year of construction: 2005, 822 USED External flour storage silos SPIROMATIC. TECHNICAL DATA: - storage temperature: - 20 degrees C to + 40 degrees C. - silos capacity: 1 x 15 tons, 2 x 7.5 tons - year of production: 2005 EXTERNAL DIMENSIONS: - height: approx. 9m - diameter: 1 silos - 2.4 m, 2 silos 1.9 m each EQUIPMENT: - spirals for transporting flour - hopper for the bowl Gbsdpfxotuvgyj Akyou - dosing - mixing water - computer, entering recipes The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Universal temperature control unit Oil Advanced with electric heating and connections for external cooling Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating SINGLE type STO 1-18-100-D2 Godpoz Ebv Eofx Akyebu Serial No.: 133616 Year of manufacture: 2013 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating capacity 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply + return DN25 - G 1" Cooling water supply G 3/4" Cooling water return G 1/2" Connection power 24.2 kVA Controller SC type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz, 33.7 Amp. - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control - For cooling, an external cooling unit or an external cooling circuit is required (cooling is carried out via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without the illustrated connection cable with plug Dimensions L x W x H 1280 x 395 x 1180 mm Weight 226 kg Good condition

Year of construction: 1958, condition: ready for operation (used), Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible. Gbsdpfsyg Nvmjx Akyou

Condition: used, Year of construction: 2012, Dust collector JP 300-L with briquetting press CS 3-12-R Year of manufacture: 2012 Equipment: Dust collector Briquetting press Gedpfx Akjz Rrbkjyobu Technical data: Vacumobil JP 300: Nominal volumetric flow rate: 5100 m3/h Maximum volumetric flow rate: 6000 m3/h Pressure difference at nominal volumetric flow rate: 2700 Pa Pressure difference at maximum volumetric flow rate: 2200 Pa Filter area: 28.0 m2 Suction nozzle: 300 mm Nozzle height: 1215 mm (center) Fan motor: 7.5 kW On-site fuse protection: 32 A Compressed air connection: 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 120 NL per pressure pulse with a pulse duration of 150 ms Sound pressure level: 75.0 dB Weight: 900 kg Briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m3/h (material-dependent) Hydraulic pump motor: 3.0 kW Mixer motor: 0.37 kW Metering screw motor: 0.75 kW On-site fuse protection: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Location: NRW (North Rhine-Westphalia) Availability: approx. June/July 2027

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Gjdpozi Rkcsfx Akyebu Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Mechanical cleaning of filter bags Return channel for cleaned air

Condition: used, mileage: 160,000 km, power: 302 kW (410.61 HP), first registration: 10/2009, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2009, Palift T18 18-ton system – HMF 1460 – High-level and ground-level control – 2 extension booms – Rotator and grapple function – External planetary axles – Rockinger coupling – 2 outriggers – permissible total weight 26,000 kg – tare weight 14,100 kg – wheelbase 3,875 mm – = Further information = Suspension: Leaf spring suspension Front axle: Steered Rear axle 1: Reduction: External planetary axles Rear axle 2: Reduction: External planetary axles Unladen weight: 14,100 kg Payload: 11,900 kg GVWR: 26,000 kg Reference number: 32 = Company information = Gbsdpfxoz Rzw Ue Akyou We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, External/Internal Cylindrical Grinding JONES-SHIPMAN type 1310 Capacity: Ø 200 x 450 mm (8'' x 18'') Tilted table Grinding wheel: Ø 300 mm x thickness 25 mm x bore Ø 125 mm Drive wheel speed: 1750 and 2300 RPM Rotary grindstone holder support Supplied without internal grinding spindle Equipped with 1 lubricant tank Voltage : 380 V Gsdpfx Aksz I A A Esyebu Length: 1800 mm Depth: 1600 mm Total height: 1900 mm Weight: approx 2 T

Condition: used, Year of construction: 2015, GWK Hermeticool Anlage (2015) - system designed to dissipate heat from industrial cooling circuits, and its performance depends on the water temperature and the outdoor temperature. This is a complete central cooling system comprising: • two 3,000-liter tanks • pumps • a Hermeticool cooling unit • approximately 10 fans • automatic control system • water treatment • dual water softening • biocide dosing • corrosion inhibitor dosing Gbjdpfxjz Hlgqe Akyou • filtration • an expansion vessel • piping and fittings • an electrical control cabinet

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, particularly for temperature control of injection molds and other process tools. Serial No.: 102010730001 Year of manufacture: 2010 Gjdpfx Aksz Ek Spjyobu Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level