Used Engel Victory for sale (226)

Condition: excellent (used), Year of construction: 1993, Clamping force: 1,300 tons Screw diameter: 160 mm Clamping platens: 2,250 x 1,950 mm Minimum installation height: 700 mm Maximum installation height: 1,400 mm Ejector stroke: 350 mm Opening stroke: 1,650 mm Hnjdowmlffepfx Afiou Weight: 130 tons CC90 control system Operating hours: 14,700

Condition: good (used), Year of construction: 1991, For sale are two complete EC88/CC90 control units removed from operational Engel injection molding machines. Price per control unit: 1500 EUR. It is also possible to purchase individual boards such as temperature, CPU, power supply boards, etc. Hnsdpfxjxfzb Rs Afiou

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 2000 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz Hnedpfx Aswd Sywefieu ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: used, Year of construction: 2001, operating hours: 125,000 h, functionality: fully functional, machine/vehicle number: 44235, clamping force: 400 kN, screw diameter: 80 mm, displacement volume: 1,355 cm³, overall weight: 21,000 kg, Operational, taken out of service. Ready for transport. Excluding temperature control units, moulds, conveyor, hopper, extraction, guarding and robot. Installation height 350 mm. Hnodpfjxfi Thox Afisu

Condition: excellent (used), Year of construction: 2015, operating hours: 55,201 h, functionality: fully functional, screw diameter: 70 mm, Technical advantages for the machine: - high performance and precision, - fully electric and energy-efficient, - rapid, dynamic, and highly precise movements thanks to a five-point toggle clamping system with low-friction platen guidance on precision linear bearings, - efficient injection unit ensures ultra-fast injection, Hjdpfxsxfbdxe Afionu - complete service documentation and operating manual, - maximum energy efficiency through the consistent use of high-efficiency servo drive technology.

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, total height: 2,300 mm, total width: 1,291 mm, total length: 4,083 mm, screw diameter: 2,522 mm, clamping force: 1,300 kN, injection pressure: 2,400 bar, overall weight: 10,600 kg, We once again have some excellent cleanroom machines in our range. Here, we are offering this Engel 2-component cleanroom machine from 2006. The machine comes complete with a GEKU SR 500 ST. Additional accessories include a safety cage and a turntable, all part of the package. The machine has run just 33,107 cycles in automatic mode. Hedpoxd H A Refx Afisnu The machine comes from a reputable pharmaceutical manufacturer, so both the machine and its handling system were maintained under a very strict maintenance regime and are in first-class condition for their age. Even the paintwork shows hardly any signs of wear. I am happy to provide you with further data and a quotation upon request. Best regards, Nick Schönfeld Machinery Trading

Condition: excellent (used), Year of construction: 2011, operating hours: 38,000 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, For sale is an injection moulding machine from Engel, model VC 2550 H 80V 400 Combi. The machine has been regularly serviced (service reports available) and is in excellent condition. Hodpfjxb D Dtox Afionu The offer includes: - Yaskawa Motoman YR-MH00050-B00 robot, year of manufacture 2011 - KraussMaffei conveyor belt (2.5 x 0.8 m), year 2012 - Safety fence (3.5 x 2.7 x 2.1 m), year 2012 Technical data: Year of manufacture: 2011 Operating hours: 38,063 Control system: CC200 Clamping force: 4,000 kN Cylinder diameter: Ø70 mm horizontal and Ø22 mm vertical + Spare cylinder Ø22 mm without heating bands 2x hydraulic core pull Needle shut-off: 2x pneumatic / 2x hydraulic each Mold heating circuits: 12x Temperature sensors: 4x Mold cavity pressure: 2x Machine weight: approx. 21,000 kg Transport and loading can be organised Europe-wide, upon request and for an additional charge. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Engel GNM 5440 motor 24 V SN:J33134 ,used, normal traces of use, 100% functional, scope of delivery according to photos Hjdpfx Aji D Hvbsfisnu

Condition: excellent (used), Year of construction: 2018, Engel DUO 8160/900 WP PRO Ecodrive (2018) Hodpfxsxbzpyo Afionu Clamping force: 900 t Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 1996, operating hours: 52,000 h, functionality: fully functional, machine/vehicle number: 30391, clamping force: 650 kN, overall weight: 9,000 kg, Machine is ready for transport. Operational and set up for use. Excluding temperature control unit, extraction, conveyor belt, and hopper. Installation height 250 mm. Including robot and safety cage. Hedpfxjxfi Sqs Afisnu

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Injection moulding machine with extensive additional equipment – from cleanroom production For sale is a very well-maintained injection moulding machine with numerous additional features. The machine comes from a cleanroom production environment and was exclusively operated with PP material – accordingly, the screw is in an almost as-new condition. Highlights: - Extensive special equipment - Used exclusively with PP - Very clean condition – excellently maintained Hnsdpfxowb Dl To Afiju I purchase all machines and peripheral devices directly from customers at a fair price. The subsequent resale price is calculated appropriately so that all three parties – seller, buyer, and myself as intermediary – make a small, fair deal. Unreliable offers from various used machinery dealers are therefore not welcome.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 Hnedjxcw T Rspfx Afiou - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Hsdpst Dxqtefx Afienu Incl. robot (ASS) Production in clean room.

Condition: excellent (used), Year of construction: 2015, Injection Moulding Machine ENGEL VC 330/180 tech – Duroplast Robot: ENGEL Viper 40 Control System: RC200-A03 Year of Manufacture: 2015 Clamping Unit Clamping force: 1,800 kN Tie-bar spacing (h × v): tie-bar-less design Platen dimensions (h × v): 880 × 830 mm Minimum mould height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar (max. 2,177 bar) Injection rate: 151 cm³/s Nozzle stroke: 500 mm Dimensions & Weight Hnjdsxbrrxjpfx Afiju Net weight (with control cabinet): 11.7 t Dimensions (L × W × H): 3.72 × 1.35 × 2.02 m Additional Equipment ENGEL ecodrive SHV2 – servo-hydraulic drive system with low energy consumption and minimal noise level. Quick mould change – hydraulic 4-point system, 300 × 300 mm. Core control – 3 hydraulic circuits with volume measurement, graphic pressure/speed adjustment and position monitoring (Euromap 13). Duroplast package – reinforced screw, non-return valve, open nozzle, wear- and corrosion-resistant materials, cylinder and nozzle heating preparation (without cabling), requires feeder (e.g. rotofeeder). Automation Robot: ENGEL Viper 40 integrated with RC200-A03 controller. Material feeder: ROTOFEEDER BMC50 with inverter and dedicated software interface. Control unit: CC200 microcomputer with 15” TFT color touchscreen. Software Features VirtMould – machine simulation and training Ecograph – energy consumption analysis Performance charts Process charts (PD-Graph I) Minicam – process assistant Batch counter Alarm notifications via e-mail Weekly timer and USB data backup

Condition: excellent (used), Year of construction: 2000, Clamping force: 300 t Screw diameter: 70 mm Shot weight: 935 g Shot volume: 1039 cm3 Screw speed: 298 rpm Injection flow rate: 349 g/sec Injection time: 28 sec Injection rate², injection pressure increased: 1039 cm³ Max. stroke volume¹: 983 cm³ Max. shot weight²: 1441 g Specific injection pressure: 1734 bar Hodjxbdr Rjpfx Afionu Opening stroke: 850 mm Ejector force: 82 kN Ejector stroke: 200 mm Max. daylight: 1700 mm Mould mounting plates: 1050 × 1050 mm Enlarged mounting plate: 1050 × 950 mm Type: Horizontal Drive: Hydraulic \+ Robot ERC 53/3- EA

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, Engel VC 1350/200 Tech Clamping force: 200 t Year: 2007 Injection weight: 562 g Injection unit: .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 ccm Injection weight: 562 g Mould clamping system: 200/... Clamping force: 200 t Mould platen dimensions: 860 x 570 mm Mould height: 400 mm Hnedpfxoxan Exo Afiou Opening stroke: 750 mm Maximum platen distance: 1150 mm Ejector stroke: 180 mm General data: Control system: CC200 Equipment: - Pneumatic valve - 2 x hydraulic core - Robot - 8 hot runner zones - 8-section rotameter

Condition: new, New 35 mm cylinder – fully assembled and ready for immediate use! Unpack – install – drive off! ✅ brand new ✅ fully pre-assembled ✅ immediately operational I purchase all machines and peripheral devices directly from the customer at a fair price. The resale price is calculated fairly so that all three parties – seller, buyer, and myself as broker – benefit from a small, fair deal. Untrustworthy purchase offers from various used machinery dealers are therefore not welcome. Hjdpfx Aew Ha Nlsfijnu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Hnjdpjw Rg Tqofx Afisu Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Hnjdpfx Afew Rfh Toieu Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 Hodpew U Sz Iofx Afionu GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: good (used), Year of construction: 1992, Closing force 500 KN Screw diameter 30 mm Hnjdpfxsvygh Ns Afiju Weight 3,200 KG

Year of construction: 2004, condition: ready for operation (used), General Data Machine weight 10500 Control Unit Brand ENGEL Model n/a This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Application Types Hjdpfxjw Nb Rno Afisnu Injection Moulding

Condition: good (used), Year of construction: 1998, Screw diameter 25 mm Closing force 25 ton Opening stroke 350 mm Weight 2,900 kg Hnodpfx Ajvxh Iusfisu

Year of construction: 2009, operating hours: 41,246 h, condition: ready for operation (used), General Data Machine weight 13700 Control Unit Brand ENGEL Model CC 200 Additional Equipment Robot included This Engel VC 330H/200el/180 Combi was manufactured in 2009. It features a screw diameter of 30 mm and includes a robot, despite having a defective CPU. Weighing 13,700 kg, it has accumulated 41,246 operating hours. Consider the opportunity to buy this Engel VC 330H/200el/180 Combi hydraulic injection moulding machine. Contact us for more information about this machine. Hnedow Ih T Hspfx Afisu Application Types Injection Moulding

Condition: excellent (used), Year of construction: 1992, Clamping force 8,000 kN Opening stroke 1,000 mm Clamping platens 1,620 x 1,525 mm Tie bar diameter 180 mm Screw diameter 105 mm Hnodpfx Afstucrcsiou Special injection weight 3,740 g Machine weight 65 tons