Used Elumatec for sale (141)

Year of construction: 2004, condition: used, Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spray device Milling area: 300 x 120 mm Fpodozyapcepfx Akysn Hub: 115 mm Weight: approx. 200 kg

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Fedox Ecfkspfx Akyjpn Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Fpjdpfx Akozcz Dnjyon Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, Feature | Value Machine type | Double miter saw Saw blade diameter | 380 mm Saw blade speed | 2,800 rpm Motor power | 2 × 0.74 kW (per sawing unit) Operating voltage | 400 V / 3~ / 50 Hz Operating pressure | 7 bar Fpsdpfxszdvnij Akyen Swivel range | 0° to 45° to the left and right Detent positions | 15°, 30°, 45° Max. cutting length | approx. 7,000 mm (model-dependent) Material | Aluminum and plastic profiles

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, total height: 2,000 mm, total width: 1,600 mm, overall weight: 5,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 6,000 W, product length (max.): 7,500 mm, number of axes: 3, This 3-axis Elumatec SBZ 131 was manufactured in 2010. It features an impressive X-axis travel of 4200 mm, Y-axis travel of 485 mm, and Z-axis travel of 340 mm. The machine includes an 8-position rotating tool head and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality profile machining capabilities, consider the Elumatec SBZ 131 CNC profile machining centre we have for sale. Contact us for further details. • Control: Industrial PC with eluCam software; 15" colour monitor Fpsdpfx Akjyt Ifysysn • Turret/tooling: 8-position rotating turret head with 8-position tool changer • Rapid traverse: X 60 m/min; Y 30 m/min; Z 30 m/min • Tool interface: BT30 • Collet systems: ER25 / ER32 • Saw blade diameter: approx. 300–420 mm Technical Specification Taper Size BT 30

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Fpodpezf Agzofx Akysn Feed with 2-hand operation Roller beds and length stops on request Weight: approx. 1,000 kg

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 485 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 6,000 rpm, machine/vehicle number: 1300030760, TECHNICAL DETAILS Travel range, X-axis: 4,200 mm Travel range, Y-axis: 485 mm Travel range, Z-axis: 340 mm Max. speed, X-axis: approx. 60 m/min Fpsdpfx Ajzxngmskysn Max. speed, Y-axis: 30–60 m/min Max. speed, Z-axis: 30–60 m/min Max. spindle speed: 6,000 rpm Spindle power: 5.5 kW Tool changer: 8-position turret MACHINE DETAILS Compressed air supply: 7 bar Air consumption: approx. 100 l/min with spray device Power supply: 400 V, 3~, 50 Hz

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Fpedpfxjuiy Ngo Akysn Training of your employees

Year of construction: 2022, operating hours: 141 h, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, milling spindle speed (max.): 20,000 rpm, saw blade diameter: 180 mm, machine/vehicle number: 122000029, Machine with only 141 operating hours! TECHNICAL DETAILS Travel range X-axis: 4,176 mm Travel range Y-axis: 1,040 mm Travel range Z-axis: 540 mm Traverse speed X-axis: max. 120 m/min Traverse speed Y-axis: max. 60 m/min Traverse speed Z-axis: max. 30 m/min Machining length without end-face machining: max. 3,851 mm Machining length with end-face machining: max. 3,525 mm Maximum bar diameter: 180 mm Tool storage locations in the automatic magazine: 12 Disc cutter diameter: 120 mm Saw blade diameter: 180 mm Tool length: max. 150 mm Milling spindle speed: max. 20,000 rpm Milling spindle power: 7 kW S1 (water-cooled) Tool holder: HSK-F63 MACHINE DETAILS Voltage: 400 V Frequency: 50/60 Hz Power: 17.5 kW Current consumption: 25 A Maximum motor current consumption: 20 A Short-circuit resistance (Ik/SCCR): 5 kA Compressed air pressure: 7 bar Dimensions & Weight Dimensions (L x W x H): 7,643 x 2,171 x 3,000 mm Weight: 3,800 kg EQUIPMENT Automatic tool changer eluCam software Autonomous clamping jaw movement Premium clamping jaw with linear guide A-axis, infinitely adjustable from -120° to +120° Fpjdpfxezgfvbe Akyon C-axis, infinitely adjustable from -220° to +220° Note: Further technical details regarding the machine can be found in the attached document.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0799132963, Solid cast construction with integrated rotary table guarantees optimal profile support for precise angle cutting. Saw heads can be continuously swiveled from 0° to 45° to the left and right. Fsdpexxzdlsfx Akyopn

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Oscillating operation possible Fpsdozf I Ttepfx Akyen Photoelectric sensors

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Fsdpfxey Sxr Nj Akyspn Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. Processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 RPM Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed fume extraction Fpjdpouwq S Dsfx Akyjn Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg Very good condition

Condition: used, miter saw for cutting PVC window profiles. Fsdpjz Dp Iajfx Akyepn

Condition: used, functionality: fully functional, machine/vehicle number: M.Nr.2510020086, Control and glazing station. Length 3.050 mm. Width 900 mm. Height 2.600 mm. Maximum clamping width 2.800 mm. Minimum clamping width 390 mm Fpedpfxez Dvhaj Akysn

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Fpedpezwl R Tofx Akyon Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Fpedpfx Akezdi Nmoyon

Year of construction: 1995, condition: excellent (used), Manual length adjustment via handwheel with digital display. Maximum feed length: 3,000 mm. Fpodpey Tyzzefx Akysn Pneumatic parking brake.

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 For attachment to any Elumatec single-head saw (right) Fedpozh Itfofx Akyepn Max. push length: 3000 mm

Condition: excellent (used), working very well Fpsdpezi Szvefx Akyon

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min Fsdpfxjzughbj Akyspn air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Fpjdjynacyjpfx Akyen Manual swiveling with digital display Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg

Condition: excellent (used), functionality: fully functional, ELUMATEC SBZ150 5-axis CNC profile machining center, manufactured in 2004. Fjdpfx Ajylbviskyspn 5-axis CNC machining center for aluminum and thin-walled steel profiles.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Fedpfx Aezhuyfekyepn Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Fsdpfx Asxz Sknekyspn Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand