Used Electrostatic Paint for sale (3,722)

Condition: good (used), Paint mist extraction DIT-FNA 20/18 Kwjdpfxeyrnyhs Ahvjw - with upper and side guide plates - 2.7 kW - 380 Volt

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor Kwedpfx Aeyuf S Hshvew Air volume 10,500/5,250 m³/h

Condition: used, working width: 250 mm, Brushing Machine / Brushing Automat Manufacturer: Ceetec Model: A 250 Automatic brushing machine with brush application system Workpiece dimensions: Max. width: 250 mm Max. height: approx. 100 mm Length: from approx. 800 mm The painting machine is suitable for the application of paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical specifications: Kwsdpsyuaptofx Ahvsw - Electronic diaphragm pump (no compressed air required) - Spray nozzles for all-round application of wood preservatives - 12 rotating distributor brushes on 8 axes (standard nylon bristles) for four-sided application of coating materials Feed speed adjustable via feed roller, approx. 16-45 m/min. Capacity: approx. 960 – 2,500 meters/hour Power supply: 3 × 380 V EU Machine weight: approx. 350 kg Machine will be cleaned and technically inspected before delivery. All hose connections, the diaphragm, and the set of brushes will be renewed! Delivery time: approx. 3-4 weeks

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Ksdpfx Ahjytgpqsveww

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. Ksdpfx Ahsx H Rhrovsww - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Year of construction: 2026, condition: used, functionality: fully functional, Passenger Car Paint and Drying Booth DURST / CMC Concord – 26,000 m³/h – modernized – ready for operation Manufacturer: CMC / DURST Paint Systems Model: Concord Cabin year of manufacture: 1998 Modernization: 2016 For sale is a professional passenger car paint and drying booth from our bodywork and paint workshop. The unit is still in daily use and can be fully tested on-site. The sale is solely due to a new investment in modern paint systems. Technical Data Internal cabin dimensions: Length: approx. 7,000 mm Width: approx. 4,000 mm Height: approx. 3,000 mm External dimensions: Length: approx. 7,100 mm Width: approx. 4,100 mm Height: approx. 3,800 mm Airflow Capacity Supply air: 26,000 m³/h Exhaust air: 26,000 m³/h Air changes: approx. 310 air changes per hour Fans: Radial fans Motor output: 7.5 kW each Heating system: Gas surface burner Heating output: approx. 260–300 kW Maximum drying temperature: 80°C Fuel Originally natural gas Currently converted to LPG (liquefied petroleum gas) Electrical Data Connected load: approx. 20 kW 400 V / 50 Hz Equipment Spray and drying mode Automatic switch-over between spraying / drying Frequency converter for fans Temperature control 0–100°C Ceiling filter pressure monitoring Ceiling filter system Floor grid extraction Automatic run-on timer Operating hours counter Burner safety shut-off Explosion-proof emergency button Control cabinet with digital display Complete supply and exhaust units Fresh air and exhaust air ducts Condition Unit is fully functional Still in operation Inspection and functional test possible at any time Delivery / Dismantling Unit can be inspected by arrangement Dismantling and transport by purchaser Forklift assistance can be provided if required Location Germany Kwedpfxsyrxy Se Ahvew 35582 Wetzlar

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters Kjdpfox Uz Rmsx Ahvjww - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Kwedpjyrr Rqsfx Ahvsw Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, Automatic door painting line comprising: Kwodpoyrr Dksfx Ahvow Automatic door destacker, door by door Automatic painting robot with spraying Door stacker onto trolleys Door dimensions: lengths from 2000 to 2600 mm widths from 730 to 1030 mm

Year of construction: 2013, operating hours: 200 h, condition: good (used), functionality: limited functionality, General Characteristics of KALTENBACH Equipment 1. Drilling / Profile & Plate Processing Machines Function: Kjdpfx Ahsyrfv Tsvsww Precise drilling of steel profiles and plates, threading, countersinking, and marking. Suitable for pipes, profiles, and plates with complex hole patterns. Features: - CNC control for high precision. - Automatic tool changer for multiple operations. - Servo motors and ball screws ensure accuracy. - Multi-axis spindle for flexible operation. Purpose: Preparation of holes and welding points in metal structures. 2. Cutting / Band Saws and Saw Lines Function: Straight and mitre (angled) cutting of steel profiles, tubes, and plates. Features: - Band saws or circular saws. - Mitre cutting capability. - Automated conveyor systems for efficient material handling. Purpose: Production of structural elements and construction parts. 3. Shot Blasting Systems Function: Removal of rust, scale, and contaminants from metal surfaces. Features: - High-speed shot blasting turbines. - Configurations for profiles, tubes, and plates. - Robust construction for continuous, high-throughput operation. Purpose: Surface preparation before cutting and painting. 4. Painting and Surface Treatment Systems Function: Application of primer and top coats to protect metal surfaces and enhance appearance. Features: - Painting booths and robotic spray systems. - Integrated drying units. - Conveyor and transfer systems for continuous workflow (blasting → painting → drying). Purpose: Corrosion protection and achieving a professional surface finish. Overall Characteristics - Modular and customizable system configurations. - CNC control and automation enhance productivity and precision. - High throughput and industrial-grade accuracy. - Complete production line integration: cutting → blasting → painting.

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. Kwedpfjyrffhsx Ahvsw No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Kwsdsvvizkopfx Ahvew Storage location: Garbsen

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 209981-002-2018, pressure (max.): 448 bar, WIWA Airless 28064 Delivery rate DH: 153 cm³ Transmission ratio: 64:1 Kjdpoyqx Utjfx Ahveww Max. material temperature: 80 °C Max. operating pressure: 448 bar Max. inlet pressure: 7 bar Weight: 80 kg Serial no.: 209981-002-2018 Further information available on request.

Condition: used, Paint mist extraction system, approx. width 1200 mm, height 2200 mm, extraction motor mounted on top Kwodpfxeyl Ippj Ahvsw

Condition: new, Year of construction: 2025, FILTER WITH A MEMBRANE PUMP !!! A bathtub for removing the varnish coat from rims and other objects covered with various types of paints, solvent varnishes and powder varnishes. Basket working dimensions (mm): 1250 x 800 x 700 mm * The bathtub is made of high-grade 304 acid-resistant steel. * Insulated on all sides with 40 mm insulation material, it allows us to efficiently and quickly heat the liquid to the desired temperature. * The shell of the device is made of stainless steel. Equipment of the device: - Indirect heating (heating mantle), - Automatic temperature control of the heating medium, - Baskets made entirely of stainless steel, - LED indicator lights, - Ceramic heaters in the cover of 2 x 4,5 kW acid-resistant pipes, - Aeration system for the entire bottom of the bathtub, - 12-month warranty. Our devices are made with great care and attention to detail. CHOOSE BUMEX SP. Z O.O. Kwedegwg Haspfx Ahvew Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2023, This paint booth is being sold on behalf of a customer and can be inspected under power. Kwedpfx Ahoylm U Rjvew

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm Kodpfx Aowbtvuehvjww

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm Kjdou Afu Rspfx Ahveww - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Year of construction: 2022, condition: like new (used), Immediately available, as new condition, 12-month warranty - For solvent-based substances according to DIN EN 1539 - Max temperature 150°C (can be increased upon request) - Useful volume 1,875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Rails for loading the oven - Maximum allowable quantity of combustible materials at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS 40-1 controller for simple temperature control with predefined ramp or hold times (1 program, 4 segments); the controller also offers features such as self-optimization and up to 3 process outputs - Additionally, a simple timer is integrated and can be started via the front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Net weight: 820 kg - Charging trolley with 12 trays and 24 stainless steel shelf levels available separately; 4 units on offer - Documentation, CE declaration Viewing by appointment in our warehouse. Kjdpfx Aexbtvfshvsww Oven, drying oven, firing furnace, heating oven, heat cabinet, industrial oven, solvent oven, tempering oven, warming oven, tempering chamber, drying cabinet, chamber kiln, curing oven, recirculating air drying cabinet, recirculating air oven, paint dryer

Condition: used, Spray Booth / Drying Booth ARYA PONY L7000 / L6000 – fully functional For sale are used spray and drying booths from the manufacturer ARYA Oto Servis Ekipmanları, model PONY, year of manufacture 2008. The units come from an operational environment and are fully functional. Technical specifications (depending on the booth): Internal dimensions: approx. 6000 × 4000 × 3050 mm (another booth approx. 6000 × 3070 × 2650 mm) Airflow capacity: 18,000 – 24,000 m³/h Motor power: Supply and exhaust fans each 5.5 kW to 7.5 kW Total power consumption: approx. 8 – 17 kW Burner heating output: approx. 200,000 kcal/h Temperature range: Spraying: approx. 20 °C Drying: up to 60 °C Kodpfxjyniure Ahveww Connection: 400 V / 3~ / 50 Hz Lighting 230 V Thermostat: 20–60 °C CE / TSEK certified Condition: used, age-appropriate technically sound ideal for automotive painting, smart repair, industry, or workshop use Other details: Inspection possible by arrangement Dismantling and transport to be carried out by the buyer Sale without warranty, private/business sale 📍 Location: Wörrstadt 💶 Price: negotiable If interested or if you have any questions, please get in touch.

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system Kjdjyknluopfx Ahveww - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Kwjdjulc S Ropfx Ahvow

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm -Volume: 1500 liters Kwodsvcb U Ajpfx Ahvew -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder -Connected load: 29 kW -6 mesh shelves included, as well as V2A support brackets -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven

Condition: used, Year of construction: 2000, functionality: fully functional, feed rate X-axis: 40 m/min, We offer this used Venjakob LT - Coolack TA painting unit, manufactured in 2000. Type: LT - Coolack TA Serial No.: A 00 02 004 / Pos 0200 Year of manufacture: 2000 Spraying medium: Water-based paints Incoming air pressure: 6 bar Max. spraying material pressure: 180 bar Operating speed: 8 - 40 m/min Equipped with a cooling wall for economical paint usage Two automatic conveyors Paint pump If you have any questions or need more information, please send us a message or call us. Kodpfx Ahsymtikjvsww

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 Kjdsxm Twtjpfx Ahvjww VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.