Used Electrode Furnace for sale (1,209)

Condition: used, El. heated pit furnace, make Borel with air circulator type: 11.85 Isdpfx Aevv Sw Iednja temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm without control cabinet

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Ijdpfxjwi Ry Ho Adnsa Machine weight: 1500 kg

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Iodpfxoim Ik So Adnsa Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Iedpfow Emyzox Adnoa

Condition: good (used), Year of construction: 2012, LENZEN ATT 800C CONTINUOUS TEMPERING FURNACE Iedpfx Adew Ecy Dsnoa 300kg/h Capacity

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Iodpfxeuhmacs Adnea Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Year of construction: 2017, condition: like new (used), functionality: fully functional, Fours H&C 2-level oven max 3460 mm x 2200 mm Year: 2024 Dimensions of glass supports:- Support 1 = 3260mm x 2200mm - Support 2 = 3460mm x 2200mm Approximate external dimensions of the oven: Width: 4300mm Height: 2710mm Depth: 3260mm + rails Maximum temperature: 160°C Iodpfxevyzh Rs Adnsa Power: S-LTD-298

Year of construction: 2018, condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550ᵒC useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW Isdpfxjdt R Uus Adnja circulation fan: 1 x 7,5 kW

Condition: ready for operation (used), Heraeus MR 260 annealing furnace Internal dimensions: 260mm x 500mm x 160mm ( W x D x H ) Space requirement: 1100mm x 700mm x 1560mm ( L x W x H ) Weight: 150 kg Nominal temperature : 1000°C You are welcome to visit us for an inspection. Isdpfx Asrm R Eyodnsa We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable Iodpfxouxg Idj Adnea -Dimensions: 710/480/H865 mm -Weight: 119 kg

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Ijdpfjwmfyvex Adnsa Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: excellent (used), Oven Ijdpfsfi Thujx Adnsa Heating cabinet N 11 / R Control C30 to 1100°C

Condition: used, Year of construction: 2007, functionality: fully functional, TCGT GTW Ijdpfxowintws Adnea GW5025ZD series low-e tempering and bending cylindrical shapes, starting with Radius > 1200 mm. laminating with vacuums bag up to 7000 mm GMR Stock Place

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks. Iodpfx Aswtfiqsdnsa

Year of construction: 2017, condition: ready for operation (used), Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. Ijdpfxswykz Sj Adnoa For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm Isdoh Uhlijpfx Adnsa -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, Tamglass HTF ProE 2136-CTS-20-L (iC) Glaston Furnace Computers/Software 2020 Glaston iControl upgr 2020 Glaston Furnace 1 PC upgrade 2023 Glaston Blower Upgrade 2020 Glaston Furnace Integrated Sca 2020 delivered year 2013 • Thermal scanner upgrade delivered year 2014 • Air balance upgrade (AAB) delivered year 2019 • New Impellers (2 pcs) for blowers KSXMB-80-3 RD/LG • New Bearing units (2 pcs) for blowers KSXMB-80-3 RD/LG • Blower vibration monitoring system upgrade (BMONi) • Frequency converters for quenching blowers (S) TECHNICAL SPECIFICATION AND DATA TAMGLASS HORIZONTAL TEMPERING FURNACES Glass thickness range: 3.8...19 mm tempering Loading area: 3.8mm and over 2100mm x 3600mm Maximum glass size: ANSI Z97.1-1984 ECE R43 4.7 mm and over 2100 mm x 3600 mm (3900)* 1000 mm x 1500 mm 3.8 mm and over 2100 mm x 3000 mm - *Single sheets 300 mm longer can be tempered with reduced production rate Minimum glass size: 3.8mm and over 100mm x 250mm Maximum production rates with K = 100%, with clear float glass. 4mm 160 m2/h 5mm 135 m2/h 6mm 112 m2/h 8mm 84 m2/h 10mm 67m2/h 12mm 56m2/h Iedjwinuhspfx Adnja 15mm 45m2/h 19mm 35m2/h In actual operation, the production rates reach 50-85% of the maximum and depend on the glass dimensions, edgework quality, and loading area utilization. Minimum distance of sheets from each other is 50 mm. Environmental conditions: Temperature 20…40 ºC Relative humidity < 80% Installed power at sea level: Heating and drive 464 kW Blowers 2 x 215 kW 430 kW Total 884 kW

Condition: used, Welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier Iodpfx Adohgbxhjnoa -Manufacturer: ESAB, welding rectifier type Origo Arc 410c -Welding power: max. 400 A -Welding cable with electrode clamp -Ground cable -Quantity: 1 piece available -Dimension: 920/720/H930 mm -Weight: 182 kg/pc.

Condition: used, Welding inverter, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable:. with electrode clamp -Ground cable -Dimension: 560/290(H500 mm Ijdpfoi Agxuox Adnsa -Weight: 44kg

Condition: used, Stick electrode, wire electrode, welding wire -Diameter of electrode: 4.0 mm Iodpfxockd D Ho Adnea -Rutile electrode: for fillet welds and horizontal V-welds -Smooth sweat appearance and self-dissolving slag. -185% metal recovery: using high-speed welding -Number: 90x packages available -Price: per package

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, welding rod made of aluminum-magnesium alloy Ijdpfx Adjcbkklsnea - net weight: 7 kg -Quantity: 1x package available -Weight complete: 7.6 kg

Condition: used, Electrode pliers with air connection for, electrode device, electrode welding device, joint planer, electrode pliers -for: carbon arc process -Cable length: 2.5 m -Dinse connector -Air connection -Number: 2x cables available -Price: per piece Isdpecf Dhuefx Adnoa -Weight: 4 kg

Condition: used, Wire electrode, welding wire, welding wire -Manufacturer: Bohler, started roll of MAG wire electrode Iedpfx Aofu Trkjdnea -Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm -Dimension: Ø 300/100 mm -Weight roll: 12.8 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier Iodpsd I Szqefx Adnoa -Welding power: max. 300 A -Welding cable with: electrode clamp -Ground cable -Number: 1x welding machines available -Price: per piece -Dimensions: 600/1230/H930 mm -Weight: 294 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available Ijdsd Ih Daspfx Adnoa -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg