Used Elb Grinding Machines for sale (73,083)

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Itjdpfoumm Npsx Afisn

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Itsdpehg Rcxsfx Afien Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, Year of construction: 2019, functionality: fully functional, Selling a Selmi Comfit 2019 Panning Machine, complete with the integrated spray system. This machine is in excellent working condition and has been very well maintained. Ideal for coating nuts, dried fruits, coffee beans, or inclusions in chocolate or sugar – it’s perfect for any artisan or small-scale chocolate manufacturer looking to scale up panning production with precision and efficiency. Key Features: Year: 2019 Includes the Selmi heated spray system for chocolate Itjdpfx Afow Nx A Usijn Precision-controlled air flow and temperature Polished stainless steel drum Suitable for small to medium batch production 220V single phase (UK compatible) Machine is located in Somerset, UK and available for immediate collection or shipping (buyer to arrange transport). We have two of these machines available.

Condition: like new (used), Year of construction: 2023, For sale: MHM SPiQ 20 45×55 screen printing carousel (SYNCHROPRINT iQ OVAL compact) with iDS (individual Drive System). Manufacturing date: January 2023. Manufacturer: MHM – Machines Highest Mechatronic GmbH (Austria) Model: SPiQ 20 45×55 Type: 1450IQ Year of manufacture: 01/2023 Power supply: 3×400 V, 50/60 Hz Isdpfx Ajxb Avzsfietn Connected load: 7.4 kVA Air requirement: approx. 690 l/min, 0.8 MPa (8 bar / 116 psi) Specification (per order): • Print area: 45×55 cm • Number of printing stations: 13 • Number of flash cure units: 4 Equipment: • 20× aluminium palette with neck cut-out: 52×80 cm • 13× squeegee blade 50 cm / 65 shore • 13× flood blade (low) 50 cm • 1× MHM Pro Iron – 40 cm Overall dimensions: 3.5 m × 11 m

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 3 h, overall weight: 7,000 kg, empty load weight: 3,500 kg, maximum load weight: 3,500 kg, color: white, Equipment: documentation/manual, rubber tracks, The latest generation of towing service Itjdew Hggqopfx Afion

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 8,000 rpm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Itodpew Ty S Ssfx Afion Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Iodpfx Aerfdq Uefijtn

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Itjdsu Hzg Rspfx Afisn Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Condition: ready for operation (used), Year of construction: 2019, Up for sale is a Selmi Demoulder (2019 model) in great working condition. This machine is designed to automate the demoulding of chocolate products, offering consistency, speed, and care in handling moulds. A perfect addition for chocolate manufacturers using polycarbonate moulds and looking to improve production flow and reduce manual handling. Key Features: Year: 2019 Automatically demoulds finished chocolate products Gentle handling to prevent cracking or marking Compatible with standard polycarbonate moulds Isdpfx Aow Nx Drefiotn Compact footprint – ideal for artisan and mid-scale production Reliable and simple to use 220V single phase Can be linked to Selmi Spider Cooling Tunnel or alternatively I have the attachment to take moulds off a Selmi Horizontal Tunnel and bring the moulds to the demoulder - please ask for pictures of this additional attachment. Machine is currently located in Somerset, UK and available immediately. Collection or shipping can be arranged (transport at buyer’s cost).

Condition: new, Year of construction: 2019, Storage tanks, e.g. for bitumen for asphalt mixing plant(s), etc. (vertical design) 7 x 70 m³ 1 x 68 m³ with agitator New, unused, from project cancellation, thermal oil heated and electric heating possible, complete, immediately available, for sale (individually or as a complete package). Itsdpfew Nwtlsx Afijn

Condition: used, axle configuration: 3 axles, wheelbase: 8,000 mm, first registration: 07/2020, color: white, Year of construction: 2020, General Information Odometer reading: 3,454 km Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steered Itjdpsw I T Ddjfx Afien Rear axle 3: Max. axle load: 9,000 kg; Steered Dimensions Dimensions (L x W): 1,180 x 251 cm Weights Unladen weight: 13,970 kg Payload: 25,030 kg Gross vehicle weight: 39,000 kg Functional Pump: Yes High-pressure pump: Yes Water installation: Yes Financial Information Price: On request Further Information For more information, please contact John de Koning or Mark de Koning.

Condition: like new (used), functionality: fully functional, fuel type: diesel, color: blue, first registration: 03/2020, emission class: euro6, Year of construction: 2020, operating hours: 3,100 h, I sell a trailer for the production of cement screeds and polystyrene concrete by GB-Machines Mobileman D5 ZE. Year of production 3.2020. the condition of the machine very good. Everything in working order. Full automation of component weighing, automatic dispenser of chemicals and reinforcement. Equipped with high-pressure washer, water hoses, trestle. The capacity of the cement tank 8m3, sand / polystyrene tank 22m3. Full control of functions by remote control. Iodpfxstn Nl Uj Afiotn Hatz 4H50TIC 4-cylinder engine Estrichauflieger Mobileman D5 ZE 30 m³ Mulde, Sand - Styroporkammer 22 m³ und Zement-Kammer 8 m³, EZ 03/2020, 3-Achs Auflieger, Luftfederung, BPW-Achsen, 1.Achse liftbar, 3.Achse lenkbar, Bereifung 385/65/22,5 auf Alufelgen: 1.Achse ca. 12 mm, 2.Achse ca. 12 mm, 3.Achse ca. 14 mm, Fahrgestell der Fa. Kempf SKM/3/S/39A13, kippbar, techn. zul. GG 39.000 kg, zul. GG 36.000 kg.

Condition: excellent (used), Year of construction: 2017, 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines Itodpfx Afow Euzmeijn ⚙️ Model - CS-Matic 100 ⚙️ Serial number - 63825 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 234, film width: 900 mm, pressure: 7 bar, total width: 4,750 mm, total length: 13,600 mm, total height: 2,550 mm, clamping force: 300 kN, overall weight: 14,500 kg, Stations: Unwinding device, forming station, punching station, cutting punch, stacking, rewinding station Max. tool size: 780 x 570 mm Draw depth: 127 / 127 mm Max. film thickness: 1.8 mm Film width: 250 - 810 mm Max. closing force: 30,000 daN Iodpfx Afsw Av H Esiotn Max. cycles: 45 / minute

Year of construction: 2004, condition: ready for operation (used), Selling a very rare to find Knobel Vibrating Conveyor in Stainless Steel. This machine has been tested and is in full working order. The conveyor vibrates in addition to having the pushers too. The pushers were never used since new. Itjdpfx Aow Nxtmsfisn I also have a Knobel Stainless Steel CCM-9 which needs a rebuild. Contact me for more information.

Condition: new, Unused bin washer. Bought for a contract which never materialised. Ijdotpv T Nspfx Afietn

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 750 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Isdswzzlwjpfx Afietn Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Itsdpfx Afjh S Uhfeien Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: good (used), 1 x TBM Tecnopast 350kg lifting twin-arm pastry mixer & 3 bowls. Fitted with Jacking castors Iodpfxew Aduko Afistn This machine has had a complete control panel internal rebuild with modern components in 2015. Technical specification: Manufacturer - TBM Tecnopast Bakery Machines S.P.A. Model - T500 ETT. Capacity - 350 kg (dough) & 225 kg (flour).  Installed power - 11.6 kW.

Year of construction: 2020, condition: new, Derryglan Ltd - Continuous Vertical Bag Sealer with Ink Printer Coder & Infeed Loader • Horizontal floor standing continuous sealer • Ideal machine for sealing bags on conveyor • Ink Printer / Coder, prints 2 lines up to 15 characters per line. • Infeed loader • Heavy Duty bag sealer for large pre-made bags. • Adjustable conveyor table height 140mm – 600mm • Fully adjustable settings for temperature control and speed. • Stainless-steel body. • A highly efficient low noise machine which is easy to operate and is low maintenance. Product Specifications Itodpfx Afegq N Ndeion • Power supply 220-240v 50Hz 830w, motor 1.03kw • Conveyor / Sealing Speed 0-13m / per minute • Seal Width 13mm • Sealing Thickness: 0.04 - 0.5 mm • Machine Dimensions 1200 x 520 x 1280mm

Condition: like new (used), 8-cavity spoon and knife injection moulds Iedpfx Aswq Dwhsfijtn

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Itjdpfx Aovvw Nijfien

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3 Itsdpfswhkhhjx Afion

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Iedpfxeu Ixt Ds Afijtn

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Itedpfxeu Ixkpo Afien