Cylindrical Grinding Machine

STANKO 3M194 / 630 x 4000 mm

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Rjdpfsx Eh Iqjx Ahzjbt Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Rbodpfx Aew Awmtohzst Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Erowa Robot Easy 250 automation with 6 pallets 3D probing system Oil-air lubrication of high-frequency spindle Laser measurement Spindle hours:

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening Redpfed E A I Iex Ahzebt - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Rbjdpfx Ahowywciezet Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Rbedovvvw Ejpfx Ahzjt Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm Redpfjukitxox Ahzsbt axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm Redpfsw Dvkajx Ahzjbt --> Accessories Various grinding wheels --> Documentation

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence Rsdoul Efmopfx Ahzebt - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation Rbodpsmn Rcqefx Ahzjt – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: excellent (used), Grinding length 1000 mm grinding diameter fi 350 mm Rsdpfx Ahek Abxxezebt In very good condition.