Used Eisele Vms 2 for sale (117)

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. The photos show the original condition. Cjdpfxezhki Aj Ailjrd

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - Inspected condition - Machine video - ?v=k-VA1e8rSJI Features: - Semi-automatic aluminum circular saw - Pneumatic material clamping Credsxabw Uspfx Ailjd - Infinitely variable adjustment of the saw head lowering speed - Machine table with miter adjustment - Machine base frame * without material stop as shown in the pictures

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Feature | Value Drive | Hydropneumatic Maximum punching force | 50 kN at 10 bar Stroke | 40 mm Standard installation height (daylight) | 140 mm Maximum installation height | 200 mm Overhang (ram to rear of machine) | 110 mm Table size | 250 × 200 mm Dimensions (W × D × H) | 250 × 450 × 630 mm Weight | approx. 67 kg Cedsy Hriwjpfx Ailsrd Operating pressure | max. 10 bar

Condition: used, End mill diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Crjdpfszfk Sfjx Ailed Minimum quantity spray device Pneumatic material feed via foot switch Weight: approx. 280 kg

Year of construction: 2000, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Crsdpfx Aiozfkwbelod Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Year of construction: 1991, We offer the following machine: Crodpfx Aiszgvqpelsd - with roller conveyor --> Outfeed: 4 m --> Infeed: 3 m Technical details: - Saw blade diameter: 450 mm - Cutting diameter: 150 mm - Saw blade arbor: 50 mm - Table size: Ø 700 mm - Table rotatable: 360° - Electric model - Voltage / Frequency: 400 / 50 V/Hz - Compressed air connection: 6-8 bar - Total power consumption: 3.6 kW - Machine weight approx.: 1170 kg - Machine dimensions: 1.5 x 1.0 x 2.35 m (L x W x H) Circular saw, semi-automatic - Profiling circular saw machine - Undercut saw for cutting materials: steel as solid material, tubes, and profiles, taking into account the cutting range. Cutting speed depends on the material/workpiece to be cut. Miter cut: 30° to 90°

Condition: excellent (used), Corner jointing machine, Pressta 4000 Cedpel Skl Dofx Ailord Shipping within the EU: approx. €350

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking Crsdsw D T Uiepfx Ailod There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Csdpfx Aorz Rw Rjiljrd Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Cedpfewx I Hvex Ailord Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. Codpfx Aeyyz Txeilord ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Credozbac Topfx Ailod Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Csdpfx Aexn Iq Doilerd Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Year of construction: 2016, condition: used, Max. push length: 3000 mm Sled can be folded up Manual movement Right-hand attachment 2 adjustable feet Crjdpfjza Akwex Ailsd Plastic rollers

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm Csdpfx Asu Nit Rsilerd cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Csdpfx Aieu Nigkolerd Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) Csdpfxou Niuzs Ailsrd for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, CIRCULAR SAW WITH AUTOFEED Crode Dv Raopfx Ailod Technical characteristics: DIAMETER DISK 380 mms Comments: MAGGOT in GERMANY

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Crjdpfx Aisrv A Hmolsd Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Cjdpfx Aiezap Hfjlord

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm Crodpfx Aoy Uwpxjiljd - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: good (used), Year of construction: 1967, functionality: fully functional, Metal cut-off saw Type LMS I Crodpexa Hkmsfx Ailed - Year of manufacture: 1967 - 380 Volt - 1450 rpm; 2950 rpm - 1.8 kW Transport available at an additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Credpfxoy Tizko Ailsd Price: 2,000 Euros

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm 130 mm projection Csdpfotk Ul Rex Ailord ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Csdsfitbwepfx Ailerd Dimension 60 x 850 x 1500 mm Weight 300kg