Used Edge Sanding Machine for sale (92,622)

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm Dsdewgc D Sopfx Aduoku

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Engine power: 2,2 kW Abrasive belt oscillation Dksdodq H D Sepfx Aduou pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Additional table on pulley

Condition: new, Year of construction: 2024, table length: 1,450 mm, table width: 500 mm, overall weight: 550 kg, input voltage: 400 V, oscillation stroke: 20 mm, input frequency: 50 Hz, OBS 150 ARCO edge sanding machine. NEW. Sanding height 150 Oscillation stroke 20 mm Machine length 1450 mm Front side of the processing side is curved Table spread (adjustable) Rear side for straight processing. Table tiltable up to 45 gr. Dksdpfxjr Erhwe Aduou Motor power 2.5 kW, 2 speeds. Sanding speed 11.5 and 8 meters/sec. Central extraction Diam 140 mm. Pneumatic tensioning of sanding belt. The machine is very suitable for staircase manufacturers.

Condition: not inspected (used), Sanding belt length 2280 mm Sanding belt width 140 mm Motor 2.2 kW Djdpjvrzclefx Adujku Table length 1000 mm Circular grinding device Extraction fan Transport device

Condition: good (used), CALIBRATING SANDER WITH OSCILLATING ABRASIVE BELTS MAX LENGTH 1200MM MAX WIDTH 1200MM MAX HEIGHT 230MM BELT DIMENSIONS 250x3280MM SIDE WORK TABLE 920x350MM BELT MOTOR 7.5KW=7.5KW OSCILLATION MOTOR 0.15KW=0.15KW ABRASIVE BELT SPEED 25M/SEC OVERALL DIMENSIONS 2200x1900x1150MM NET WEIGHT 1200KG Dodpfx Aevtrhuodusku

Condition: new, Year of construction: 2023, machine/vehicle number: 3487, Holzkraft edge sanding machine KSO 150 F Work table 960 x 350 mm, Table height adjustment 230 mm, Sanding surface 1,050 x 150 mm, Belt speed 20 m/sec., Oscillation stroke 20 mm, Motor 3 kW (4 HP), Motor oscillation 0.25 kW (0.34 HP), Sanding belt dimensions 3,000 x 150 mm, Console for feed device, Veneer edge sanding device with contact shoe with fine adjustment and stop rulers, Dkjdpfx Adjvpq Raoueu with grooved infeed ruler for veneer overhangs, Height-adjustable additional table with suction for sanding radii, Sanding unit can be swiveled up to 45° using a lever, Suction nozzle D = 140 mm, Weight approx. 295 kg from the Seevetal location as inspected, without transport, subject to prior sale

Condition: good (used), functionality: fully functional, overall weight: 95 kg, power: 2.25 kW (3.06 HP), Oscillating sanding belt, height-adjustable work table, adapter for dust extraction (diameter 120mm), aluminum work table, sanding unit infinitely tiltable from 0° to 90°. BG wood dust tested. Dkedpfsug Uynsx Aduju Technical data: Voltage 400V, 50/60 Hz Belt motor power: 2.25 kW Motor speed: 3400 rpm Belt speed: 20m/sec Work table: 620x220mm Belt dimensions: 2250x150mm Weight: 95kg

Year of construction: 2002, condition: good (used), Article number: MA1073 Manufacturer: FIM Type: unknown Year of construction: 2002 Length [mm]: 2000 Width [mm]: 700 Height [mm]: 1100 Weight [kg]: Approx. 500 Power supply: 380V Automatically feed: Yes Lxw table size: 1200 X 400 mm table 45 degrees inclined holes Disc diameter: two-sided deburring with one operation as two belts in use are Accessories: Suction / 2 piece replacement rollers Dkodpfx Adjd I E Snjueu

Condition: new, functionality: fully functional, saw band length: 2,280 mm, saw band width: 150 mm, Description: - Small, flexible all-rounder - Small table on the deflection roller for sanding radii and shapes - Motorized belt oscillation - Height-adjustable work table - Incl. 10 sanding belts 150 x 2280 mm K120 Technical data: Motor power: 2.2 kW 90-180 ° tiltable Belt speed: 22 m/s Table size: 750 x 350 mm Dksdpfsu Ac Tqox Adueu Sanding belt dimensions: 150 x 2280 mm Weight: from 180 kg

Year of construction: 2022, condition: new, Motor 2,2 kW (3 HP), sanding belt 2280 x 150 mm, swivelling edge sanding unit, Dedpoffyc Njfx Adueku motorized belt oscillation, support table at the deflection roller pneumatic belt tensioning table size 700 x 350 mm, working surface 1000 x 150 mm, belt speed 22 m/s, roller diameter 140 / 80 mm, suction nozzle D = 100 mm ex stock Seevetal, subject to prior sale

Condition: used, Oscillation ja_yes ja / nein 0 ja_yes ja/nein 0 ja_yes ja/nein tiltable up to ja_yes Motor output 2,2 kW Table dimensions 1000 x 350 mm sanding width 200 mm Weight 300 kg Langzauner LZK 3/2, BB 200 Edge Sander ----- Technical manufacturer's specifications: Table width: 345 mm Table length: 1000 mm Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Circular sanding support: Yes Oscillation: Yes Height adjustment: Manual table Swivel sanding belt: Yes Space required length: 1800 mm Space required width: 900 mm ----- Dedpewzmuwofx Aduoku Price of the above-mentioned machine upon request! (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT. No original images available yet; image from a brochure for the same model

Condition: used, Year of construction: 2010, Double Belt Sander Holytek PW 12 H Year of construction 2010 OscillatingMin/max working width 180/1200mm Min/max working thickness 10/250mm Sanding belt size 3730x270mm 2x Engine 7.5 HP Djdpfx Ajwnhuxjdusku Machine dimensions 2500x2250x1700mm, weight 1500kg - Year: 2010 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Used, good condition Brand Wegoma Type KS2250 GS wood dust tested Motor 2.25 kW Oscillation Front table approx. 620 mm x 220 mm Unit tiltable 0-90° Belt length 2250 mm x 150 mm Belt width 150 mm Belt speed 20 m/sec. Miter stop Dkedpjwkvxwsfx Adusu Round edge sanding device Extraction connection D 120 mm Space required approx. 1250 mm x 800 mm x 1200 mm Weight approx. 100 kg Storage location 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: ready for operation (used), Year of construction: 1999, Technical data: Grinding width - 600 mm Dsdpfjid Izyox Adueku Number of grinding units 4( 2 grinding guts and 2 calibrating shafts) Electronic sectional viscera Vacuum table Table height: adjustable 0,2 - 40 mm Control HEESEMANN SMA PC11/40 Processing height 0,2 - 40 mm Width of the segment 600 mm Belt speed max in 24 m/s Gradually adjustable belt speed Feed rate max 25m/min Blasting machine - grinding belt Segment control- electromagnetic Configuration of aggregates p-t-s Belt exchange side- Right

Condition: new, - new -- The edge sanding machine type SK-1 is perfect for sandinglarge, curved and straight workpiece edges.- The main application area of the SK 1 is the sanding of radii andshaped parts.- The sanding unit with its radii of 80 mm, 300 mm and1000 mm also has a straight sanding surface available.- The pneumatic, infinitely height-adjustable oscillation andthe heavy cast iron sanding unit ensure completesanding belt utilization and precise sanding results.- The generously designed revolving work table with itsintegrated extraction system enables the user to work easily andergonomically.- The SK-1 is equipped with pneumatic unit oscillationand pneumatic belt tensioningTechnical data:Motor power: 4 kWBelt speed: 15 m/illation stroke: 30-150 mmBelt length: 2700 mmBelt width: 150 mmTable size: 2000 × 1000 mmSpace requirement: 3000 × 1500 mmSuction: 1 x 140 mmWeight: approx. 560 kgArt. 1020-200000 Dkjdpfxsvyupue Aduou

Condition: new, Year of construction: 2023, Stock saleYear of construction 2023Description:- Sanding unit can be swivelled by hand crank- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table to utilize the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differences- With adjustable stops, ideal for veneer sanding- The grooved veneer stop allows the veneer overhangTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx. 1000 mmHeight (product) approx. 1150 mmWeight (net) approx. 300 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 950 mmWork table width 450 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2640 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSwivel sanding unit 0 - 45°SCOPE OF DELIVERY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmtool kitmitre fence Dsdevwfxbepfx Aduoku

Condition: new, Year of construction: 2022, Sale from stockYear of construction 2022Description:- Sanding unit can be swiveled by handwheel- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table for utilizing the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differencesTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx.1 000 mmHeight (product) approx. 1150 mmWeight (net) approx. 250 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 900 mmWork table width 360 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2580 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSanding height max. 150 mmSwivel sanding unit 0 - 90°SCOPE OF SUPPLY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmOn-board toolMitre fence Djdovwfkqspfx Aduoku

Condition: used, Year of construction: 1996, Oscillation ja ja / nein nein ja/nein ja ja/nein Motor output 2,8 kW Djdpfx Asvwfc Tjdusku Table dimensions 840x340 mm Weight ca. 350 kg

Condition: new, Year of construction: 2022, Stock saleYear of manufacture 2022Description:- Separate work table for solid wood and veneer sanding, manually swivelable by 45° or 35°- The stop for veneer sanding can be adjusted to 0,1 mm- Motorized height-adjustable sanding unit- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The welded steel machine stand guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate geared motor for better sanding results- Oscillation can be switched on as required- Abrasion-resistant and highly gliding plastic tracks on the work table surface- Sanding soleplate with graphite coating for a longer service life of the sanding belt- The spring-loaded belt tension automatically compensates for belt length differences- Rubberized and grooved sanding drum- Convenient operation from two sides on the rotating control panel above the machine- Centrally positioned holder for feed unitTechnical data:Dimensions and weightsLength (product): approx.1820mmWidth/depth (product): approx.1050mmHeight (product): approx.1470mmWeight (net): approx.400kgDrive powerPower oscillation motor: 0.38kWSuction connectionSuction nozzle diameter: 150mmWork table(s)Work table length: 1000mmWork table width: 280mmTable swivel: 45 / 35°Electrical dataSupply voltage: 400VMains frequency: 50HzSanding unitSanding belt length: 2640mmSanding belt width: 150mmBelt speed(s): 14m/sOscillation stroke: 20mmSanding surface length: 890mmSanding surface width: 150mmSanding height max.150mmScope of delivery:1x edge sanding machine KSO 150 M F 3 PRO1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmon-board toolmitre fence Dsdpfx Adovwfa Seusku

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 Dedpfxsxcg Hms Aduoku min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3670-09-020, overall weight: 1,080 kg, total length: 1,493 mm, total width: 835 mm, total height: 1,719 mm, input voltage: 230 V, type of input current: DC, input frequency: 50 Hz, protection type (IP code): IP65, year of last overhaul: 2021, warranty duration: 36 months, SM-200-SA fabric bonding machine with fixed welding head. Dkjdpfx Aewlhnmoduju

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Dodpfx Adsxf Ewvsusku Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available Dkedpfx Adsxg Ix Seuju MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. Dkodpfx Astpn Etjdusu The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: used, Year of construction: 2016, AKV 3006 DK-F 1 unit edge banding machine AKV 3005 DK-F with jointing cutter unit, including DIA tooling. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station with radius R 2.5 mm. Technical specifications: - Hot-melt glue application to the workpiece for edge material up to 3 mm. - 60 mm workpiece thickness without jointing aggregate, 40 mm with jointing aggregate. - Maintenance-free, coated glue pot. - HF end trimming station (16,000 rpm) for front and rear edge overhang. - HF milling station (16,000 rpm) with replaceable insert cutter (combination type) and fine adjustment accessible from the operator side. - Spaces available for additional processing units (Hebrock system). - Feed rate approx. 10 m/min. - Adjustable cutting depth for trimming saw. - Signal lamp for workpiece sequence. - Robust chain drive. - Ergonomically arranged control panel. - Double roller top pressure beam. - Viewing windows for aggregates from both rear and operator sides. - PLC control including touchscreen. Technical data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic including cooling and anti-static spray unit, 2014, 1 unit hot air aggregate for creating the optical zero-joint using special edge materials intended for this purpose. Including: - Pneumatic glue pot positioning - Cooling and anti-static spray unit - Two additional quick-change edge channels Dedpfxjxl Rmcs Adujku - Special version for corner rounding unit, max. workpiece thickness 60 mm, minimum workpiece length 200 mm - Exclusively for Hebrock edge banding machines of the 3000 series - Retrofitting possible later (additional costs on request) Technical data (Airtronic & corner rounding unit): - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Operational in approx. 2 minutes - Special version, minimum workpiece thickness 8 mm Further accessories and upgrades available on request: - Airtronic retrofitting on PLC machines, only possible at the Hüllhorst–Oberbauerschaft factory - Upgrade to edge thickness 8 mm, up to max. workpiece thickness 40 mm, with pneumatic saw adjustment - Special infeed fence for overlaid panels, 16 mm and 19 mm thickness, max. glue overhang 8 mm, separate pneumatic milling cutter adjustment (straight/radius) controllable from operator panel - Buffing station (swabbel), 1 unit - Corner rounding unit, 1 unit, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Ball bearing for corner rounding cutter 24.1 mm: 1 unit - Ball bearing for corner rounding cutter 24.2 mm: 1 unit - Corner rounding unit for 60 mm workpiece thickness: 1 unit - Quick-change device for the corner rounding unit: 1 unit - Exchange motor 0.37 kW for the corner rounding unit: 1 unit, including terminal box with electrical connector, two pneumatic quick couplings, motor plate and short-stroke cylinder, or optionally Siko counter, including R 1.0 mm radius cutter, 24.1 mm bearing for corner rounding unit: 1 unit, 24.2 mm: 1 unit - Radius scraper: 1 unit with pneumatic lift-off device, radius R 2.0 mm and R 1.0 mm - Flat scraper: 1 unit with pneumatic insertion control - Glue station changeover system including glue outlet device downward (preparati